Akyga AK-T1-300 User Manual

Symbols explanation:
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
Power Supply Instalation guide
In case of replacement of an old unit:
Disconnect all power plugs from the computer
ź
Remove the computer housing
ź
Disconnect all power connectors of the old PSU
ź
Unscrew 4 screws holding the old PSU on the back of the computer
ź
Installation of new Power Supply:
Screw new power supply to the case using 4 screws
ź
Connect power connectors of a new PSU to suitable devices inside of the computer
ź
Please remember that power connectors are intended for assembly in one particular way,
ź
if there are problems with connection of plug and connector then reverse it and try again.
Make sure that there are no loose screws left inside the computer
ź
Put on and tighten the computer case
ź
Connect the power cord plug to an electrical outlet
ź
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power
supply, do not place it in restricted ventilation area. Also, do not allow the working power supply to touch
soft surface such as pillows, blankets or clothing. The power supplies meets the limits on the surface
temperatures available to the user, as defined in the International Standard for Safety of Information
Technology Equipment (IEC 60950).
user manual
GREEN
Ecological Solutions
www.akyga.com
EC
BOX
page 1