Bullet tools CENTERFIRE SUPER SHEAR Installation

Super Shear
Blade Installation
● Remove the blade attachment screws
with a 3/16" allen wrench
● Align the blade (as shown) and fasten
with blade attachment screws
● Tighten securely for proper operation
PLEASE REGISTER YOUR TOOL TO ACTIVATE YOUR WARRANTY
Warranty is null and void unless your Super Shear™ is registered within 60 days of purchase.
Bullet Tools on behalf of Sharemy Sales
™
from an authorized reseller or distributor, that this product will be free from defects in material and workmanship
under normal use and service for one (1) year from initial purchase. This warranty includes all parts except the
blade and other wear parts as indicated on this card, and cosmetic appearance (chips, dings, scratches) caused by
normal use and wear. This warranty does not cover any damage due to accident, misuse, abuse or negligence. In
order to recover under this limited warranty, the purchaser must register their shear with Bullet Tools™ (on behalf
of Sharemy Sales ) within 60 days of purchase of the product. Bullet Tools
™
defective unit covered by this warranty. To obtain warranty service, please contact Bullet Tools
or visit www.bullettools.com/warranty-claim for pre-authorization and further instructions. Sharemy Sales
Bullet Tools disclaim all warranties, express or implied, including all warranties of merchantability and/or fitness
™
for a particular purpose. Additional rights may be available under the laws of your state or province. Any and all
warranties, written or implied, are void with any alterations to the product. Note: Sharemy Sales
shall not be liable for any special, incidental or consequential damages, including but not limited to lost revenue,
lost profits, rental or replacement equipment, downtime, damage to property and third-party claims, arising out
of any theory of recovery, including warranty, contract, statutory or tort.
Certain parts on your Super Shear
normal use. These parts are not covered under warranty
but are available to purchase through Bullet Tools or
your nearest Milwaukee ™ authorized tool repair center.
PRT-INS-WFJC.RevD.5.17 ©2017 Bullet Tools
™
Registration is simple, just fill out the form at:
www.bullettools.com/support/product-registration
1 Year Warranty
warrants only to the original purchaser of this product, when purchased
™
™ wear out during
, at its option, shall repair or replace the
™
™
™
Common Wear Parts
Part No Description
64-1622 ........................ Cordset
44-76-0210 .................. Cord Protector
22-20-0065 .................. Carbon Brush Assembly
at 208-772-0175,
and
™
and Bullet Tools
™