Advertisement
Location of Controls
DC 9V Jack
Caller ID
LCD Screen
Mute Button
Store Button
Receiver switch
Handset holder
Auto Button
Flash Button
Redial Button
DATA JACK
It can let you connect to PC or Fax machine.
WALL MOUNTING ON A TELEPHONE WALL PLATE
•
The telephone can be mounted on a wall phone plate. (Fig .1)
•
When the telephone is mounted on the wall, the reversible handset holder must
be adjusted so it will hold the handset.
•
Attach the wall mount bracket into bottom of the phone. (Fig .2)
•
Using the short line cord supplied plug one end into the Tel Line jack on the back
of the phone.
•
Plug the other end of the cord into the wall jack.
•
place the phone, over the wall plate making sure both posts fit into slots on the
back of the phone. Then push down to lock the phone into place on the wall plate.
AC ADAPTOR FOR DC JACK
SPECIFICATION:OUTPUT-DC 9V 100MA
+
POLARITY OF PLUG
+
SETTING UP
You must finish the pre-setting before using the unit. Install 3pcs AA batteries (Not Included)
or DC adapter (Not Included), then press and hold [UP] and [DOWN] button for six seconds
until the LCD display Adjust Contrast to enter the setting manual including LCD Contrast
Adjustment, Language Selectable, Area Code Setting and Time/Date Setting:
A. LCD Contrast Adjustment
- When Adjust Contrast display on LCD, use [ ] and [ ] to select the contrast
level. There are totally six levels to select.
- Press [DEL] to confirm
B. Language Selectable
- After LCD contrast adjustment, the LCD will display ENG, ESP, FRA
(ENG=English, ESP=Spanish, FRA=French), use [ ] and [ ] to select the
desire language mode.
- Press [DEL] to confirm
C. Area Code Setting
- After language setting, the LCD will display ENTER AREA CODE, use
[ ] and [ ] to set the first digit of area code.
- Press [DEL] to confirm
- Use the same method to set the rest of digits.
D. Time/Date Setting
- After area code setting, the LCD will display ENTER TIME DATE, use
[ ] and [ ] to set time.
- Press [DEL] to confirm
- Use the same method to set Date
Note: If you want to reset the Press and hold [ ] and [ ] and [DEL] for six seconds
at the same time, all of the present setting will be cleaned.
Data Jack
Tel Iine Jack
Scroll Up Button
Up
Scroll Down Button
Tone/Pulse Switch
Delete Button
STORE
MUTE
DEL
DIAL
Ringer Hi/Lo/Off Switch
AUTO
M1
M2
M3
Dial Button
One-touch Memory Button
(M1-M3)
Volume Switch
Keypad
IN USE
In Use LED
FLASH
REDIAL
Speakerphone Button
Microphone
–
Speaker
Microphone
Fig.1
Ringer
Indicator
RINGER
Fig.2
Advertisement
