Powered fan hub set with NV-PS1 and NV-FH2 Combining the NV-FH2 8 channel PWM fan hub with the NV-PS1 230/115V 24W power supply, the NV-SPH1 powered hub set is the ideal solution for powering up to eight 12V fans off the mains for home, office or multi-purpose ventilation applications.
Max. power via 4-pin PWM input 22 W Weight 47 g Operating voltage 5-24 V Fan compatibility All Noctua 24V, 12V, and 5V fans, Operating temperature -40°C to +60°C many third party fans Warranty 6 years NV-PS1 SPECIFICATIONS EMC standards...
Page 4
Caution! Interfaces 5.5mm (outer diameter) / - 24/12/5V 2.1mm (inner diameter) When powering the NV-FH2 via the 4-pin input - 60W max. barrel power input from a PC motherboard, please check your motherboard manual for the maximum current of the fan header and make sure not to exceed it. Resettable fuses Fan output 1 Fan output 2...
Installing the top cover Mounting The NV-FH2 features integrated neodymium The NV-FH2 features a removable top cover that can be magnets that make it stick to any magnetic put on the hub for applications where the status LEDs surface such as steel PC case panels. For should be hidden or where the PCB should be protected mounting to non-magnetic surfaces, the NV-FH2’s from dust, touch or mechanical impact.
Page 6
NV-PS1 power supply the NA-FC1 fan controller The NV-PS1 includes modular connectors for type C The NV-SPH1 set is ideal for controlling multiple fans (CEE 7/16, for Europe, Russia, Brazil, South Africa, using the optional NA-FC1 controller (available etc.), type A (NEMA 1-15, for USA, Canada, Mexico, separately).
6 years and direct, fast and straightforward RMA service. Should you encounter any problems with your NV-SPH1, please don’t hesitate to contact our support team at support@noctua.at. Please also consult the FAQ section on our website: www.noctua.at/faqs...
Need help?
Do you have a question about the NV-SPH1 and is the answer not in the manual?
Questions and answers