Do you have a question about the AD-2126 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Kinetik Wellbeing AD-2126
Page 1
User Manual Dual-Channel TENS Pain Reliever AD-2126 Thank you very much for selecting the Kinetik Wellbeing Dual-Channel iHealthLabs Europe SAS TENS Pain Reliever. 36 Rue de Ponthieu, 75008, Paris, France Please read the user manual carefully and thoroughly so as to ensure the safe usage of this product, keep the manual safe for future reference ANDON HEALTH CO., LTD.
CONTENTS TABLE OF CONTENTS SUPPORT Support ............................ 3 Our manual should provide you with all the information you need to set up and use this product. Intended Use ........................... 4 If you have a question, have a look at our Troubleshooting page! Contraindication ........................
INTENDED USE SETUP AND OPERATING PROCEDURES CONTENTS AND DISPLAY INDICATORS The TENS device is intended to provide temporary relief of muscle soreness caused by exercise, normal household or work activities, as well as to alleviate chronic, intractable pain and pain associated with arthritis. It is important to apply the electrode pads only on intact skin and avoid placing them directly on the head, upper neck, chest, upper back near the heart, spine, and private areas.
• Product name: Dual-Channel TENS Pain Reliever cardiac arrest. • Model: AD-2126 • Classification: Internally powered, Type BF applied part, IP22, No AP or APG, 4. The device should not be applied across or through the head, directly on the Continuous operation eyes, covering the mouth.on the front of the neck, (especially the carotid...
NOTICE NOTICE 12. Please do not use the TENS device in bathroom or other place in high 26. Information regarding potential electromagnetic or other interference between humidity . Otherwise one may receive fierce stimulation. the electrical muscle stimulator and other devices together with advice regarding avoidance of such interference please see part ELECTROMAGNETIC 13.
6. If the electrode gel pads do not attach or are dirty, wipe with a wet cloth or replace with new ones. Do not clean the pad or adhesive gels with any chemical. Please contact Kinetik Wellbeing to get replacement pads. 7. It is recommended to use the electrode gel pad less than 20 times. The specific number of times that the pad will be suitable depends on the use and storage conditions.
SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES Treatment Time Adjustment Shoulder 1. After turning device on, press and hold the button to enter the treatment time setting when the device is on. 2. When treatment time flickers on the LCD (the default value is 15 minutes), press button to adjust the treatment time to a max of 30 minutes.
Page 8
SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES Joint Adductor and Gluteus Belly Feet...
SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES Using Your TENS Mode Display on LCD Your Feeling Parameters of Wave a. Ensure electrode gel pads are firmly on the treatment area and output cables Output pulse frequency = are fully inserted into TENS machine.
Page 10
SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES Output pulse frequency = Output pulse frequency = 50Hz 2.5~100Hz; Press (1) Acupuncture (1) Output pulse width = Output pulse width = 20~100µs 20~100µs; Output pulse frequency = Output pulse frequency = 33.33Hz 50~100Hz;...
SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES SETUP AND OPERATING PROCEDURES Troubleshooting Problem Cause Solution The skin 1. Is the therapeutic time too 1. Control it within 10~15 becomes long? minutes at a time. red. You have no 1. Are the batteries 1.
MAINTENANCE EXPLANATION OF SYMBOLS ON UNIT Do not drop this monitor or subject it to strong impact. Symbol for “The operation guide must be read” Avoid high temperature and solarization. Do not immerse the monitor in water as this will result in damage to the monitor. Symbol for “Type BF applied parts”...
WARRANTY INFORMATION ELECTROMAGNETIC COMPATIBILITY INFORMATION Table 1 - Emission limits per environment iHealthLabs Europe SAS 36 Rue de Ponthieu, 75008, Paris, France Phenomenon Compliance Electromagnetic Environment ANDON HEALTH CO., LTD. Conducted and CISPR 11 Group 1, The device is intended to be No.
ELECTROMAGNETIC COMPATIBILITY INFORMATION ELECTROMAGNETIC COMPATIBILITY INFORMATION Table 3 - Proximity fields from RF wireless communications equipment Table 4 - PATIENT coupling PORT Test Band Immunity Test Levels Immunity Test Levels Basic EMC Frequency (MHz) Phenomenon (MHz) Professional Healthcare Facility Environment Standard Home Healthcare Environment 380-390...
Need help?
Do you have a question about the AD-2126 and is the answer not in the manual?
Questions and answers