MEFE Portable Boot wash packaging contains: − A QR Code on machine tag to operation manual (manual also available on www.mefe.com.au) − A complete device with two ABS casings, a 3 litre additive container on the left, and a 3m electrical connection flex with a male plug rated at 230V + earth.
5. Start Up and Use Once the MEFE boot wash has been installed, it is ready for use. Sensor start up requires the shoe to be placed firmly on the support grid. Brush rotation and wetting are instantaneous. Adjustable operating time is pre-set to 30 seconds.
To be carried on the electronic card in the connector box (part location 06) on the motor side, with the device switched off. 30 Seconds 45 Seconds 60 Seconds MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 6 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Need help?
Do you have a question about the 741801 and is the answer not in the manual?
Questions and answers