Advertisement
Quick Links
Advertisement
Summary of Contents for KLEVA 113266
- Page 1 SCAN ME...
-
Page 2: How To Install The Mounting Bracket
How to install the Mounting Bracket: This device is powered by the cigarette lighter power plug. To power the SmartPlay™, first plug the power cord into the DC port on the 1. To suction the mounting bracket, place it on your desired surface and push left-hand side of the screen. - Page 3 (Supported by some models only)
- Page 4 On your Smartplay™, go to phone link and under iPhone settings, ensure that Auto Connect is set to CarPlay. Need to download and install “Android Auto” software in “Google Play”. Wired: Simply connect the lightning USB power cable into the A mobile phone with Android 6.0 or higher must be used.
- Page 5 9) The Remote Control is not functioning? The remote control can only function if used on the left hand side of the SmartPlay™ near the remote control sensor on the left hand side of the screen. Ensure that you have inserted 2x AAA batteries into the remote to power. Go to 'setup', press 'restore factory setting', confirm 'yes' then connect again using Carplay or Android Auto.
- Page 6 (Reversing Camera not included, to be purchased separately)
Need help?
Do you have a question about the 113266 and is the answer not in the manual?
Questions and answers
all my volume controls seem to be working except when i answer the phone i have no volume
Adjust volume
To adjust the volume on the KLEVA 113266 SmartPlay™:
1. Press your finger on the top of the screen and slide down to view the status bar.
2. Adjust the volume from the status bar.
3. Ensure the phone volume is set to maximum if you are trying to increase the volume.
4. After adjusting, return to the home screen.
This answer is automatically generated