Page 1
CD-T35 快速入门指南 Quick Start Guide TU RB O HI GH ME D LO W CD-T35 / CD-T35 PH...
Page 3
CD-T35 立体声电子管CD播放器 安全指示 1. 不可自行开启本机进行维修、拆卸或改造。 2. 为了充分通风,设备背面和两侧应最少保留10cm,顶部应最少保留20cm的空间。 3. 设备不应遭受水滴或水溅,机器上不应放置诸如花瓶一类的装满液体的物品。 4. 通风孔不要覆盖诸如报纸、桌布和窗帘等物品而防碍通风。 5. 设备上不要放置裸露的火焰源,如点燃的蜡烛。 6. 设备应当连接到带保护接地连接的电网电源输出插座上。 7. 用电源插头和器具耦合器作为断开装置,断开装置应当保持能方便地操作。 8. 必须遵照电池废弃的相关地方条例来废弃旧电池。 9. 仅适用于海拔2000m以下地区安全使用,标志见图1。 10. 仅适用于非热带气候条件下安全使用,标志见图2。 图1 图2 产品技术标准:GB4943.1-2022 安全注意事项 安全警告 警 告:谨防触电,切勿打开机盖。 警告 CAUTION 等边三角形中有箭头闪电符号的图形表示警告 使用者在产品内有高压电,会导致人为的触电。 谨防触电.切勿打开机盖 RISK OF ELECTRIC SHOCK DO NOT OPEN 等边三角形中有叹号的图形表示警告使用者...
Page 4
CD-T35 立体声电子管CD播放器 CD-T35 部件名称 电源开关旋钮 碟盖 碟压 放碟区 音量控制旋钮 5.0英寸触摸屏 (1080x 920) 遥控接收窗 待机触摸开关 输入选择旋钮 状态指示灯 数字同轴输出端口 RCA模拟音频 右 输出 端 口 USB DAC数字音频输入 端 口 RCA模拟音频 左 输出 端 口 交流输入 AC IN USB PC FUSE: 100V-120V: T2AL ETHERNET...
Page 5
CD-T35 立体声电子管CD播放器 CD-T35 PH 部件名称 电源开关旋钮 碟盖 碟压 放碟区 音量控制旋钮 TU RB O HIG H ME D LO W 5.0英寸触摸屏 (1080x 920) 遥控接收窗 待机触摸开关 输入选择旋钮 状态指示灯 增益选择旋钮 XLR平衡耳机输出 6.35mm单端耳机输出 4.4mm平衡耳机输出 数字同轴输出端口 RCA模拟音频 右 输出 端 口 USB DAC数字音频输入 端 口...
Page 6
CD-T35 立体声电子管CD播放器 遥控器示意图 CD播放器:拨向CD位置 CD/AUX切换开关 功率放大器:任意位置可用 H O M E P OW E R DAC解码器:拨向AUX位置 主菜单键 待机开关键 AU X I N P U T I N P U T 输入选择键 A M P C D / DAC 曲目编号直选键 重复播放键 导航键...
CD-T35 Stereo Tube CD Player Safety Instructions 1. Don't repair, disassemble or modify the device without permission. 2. For good ventilation, a minimum of 10cm clearance shall be maintained at the back and both sides and 20cm at the top of the player.
Page 13
CD-T35 Stereo Tube CD Player CD-T35 Parts Name Switch Knob Disc Cover ower Disc Stabilizer Area for Disc Volume Control Knob 5.0 Inch Touch Screen (1080 x 1920) Remote Control Receiver Standby Touch Switch Input Selection Knob Status Indicator Digital Coaxial Output...
Page 14
CD-T35 Stereo Tube CD Player CD-T35 PH Parts Name Switch Knob Disc Cover ower Disc Stabilizer Area for Disc Volume Control Knob TU RB O HIG H ME D LO W 5.0 Inch Touch Screen (1080 x 1920) Remote Control Receiver...
CD-T35 Stereo Tube CD Player Remote Control Diagram CD Player: Switch to CD position CD/AUX Switch Power amplifier: No effect H O M E P OW E R DAC: Switch to AUX position Main menu Standby Switch AU X I N P U T...
Page 16
CD-T35 Stereo Tube CD Player Operating instructions Power On /Off/Standby 1. Power on: Rotate the power switch on the rear foot of the machine to the [ON] position, the machine will enter the standby mode and the status indicator on the front panel will light up in red. Then press and hold the [STANDBY] touch strip on the front panel or the [POWER] key on the remote control for 3 seconds, the status indicator will turn blue and the machine will power on.
Page 17
CD-T35 Stereo Tube CD Player Select Input Source Use the [INPUT] knob or the [ - INPUT + ] keys on remote to switch between inputs. In the system, you can click on [ ] in the swipe down menu to bring up input switching menu. Options include CD, Local Playback and USB DAC.
Page 18
Rotate the Gain selector on the front panel to switch between four available levels of gain Turbo/High/ Medium/Low. Adjust the gain to match used headphones. Please Note: This function is only available on the CD-T35(PH) model. USB Driver Playback 1. It's recommended to use USB drivers formatted to FAT32.
"USB_DAC". 3. For Windows, please download our dedicated drivers. No drivers are needed for other systems. 4. Make sure to set CD-T35 as the active sound device on your computer. USB drivers download: Visit the download section on our official website to download the latest USB drivers for your device: en.shanling.com...
Need help?
Do you have a question about the CD-T35 and is the answer not in the manual?
Questions and answers