Advertisement
Quick Links
Getting Started Guide
sqhub
1 Box contents
sqhub Communications Gateway
Mains Adapter MPU 18V
Getting Started Guide (this booklet)
Warranty Card
Unpack the contents, check everything is present and retain the outer packaging for future use.
2 sqhub front panel connections and indicators
Reset
Status
button
Indicator
Status Indicator colour
Blue Amber Green
Amber Red Blue
Continuous Amber Flashing
Green double Flash every 3 seconds
Green single Flash every 3seconds
Red single Flash every 3 seconds
Reset button function
Reset Wi-Fi to Network
Access mode
Ethernet Port
What this means
Power ON sequence
Power OFF sequence
Busy, please wait
Wi-Fi Access Point Mode
Wi-Fi Network connected
Unable to connect to Wi-Fi Network
Action
Press and hold button (LED immediately
goes blue), wait for LED to go green then
release
sq logger
USB Ports
External
Power
Input
Status Indicator colour
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grant sqhub
Summary of Contents for Grant sqhub
- Page 1 Communications Gateway Mains Adapter MPU 18V Getting Started Guide (this booklet) Warranty Card Unpack the contents, check everything is present and retain the outer packaging for future use. 2 sqhub front panel connections and indicators Reset Status sq logger button...
-
Page 2: Essential Safety Information
The sqhub is designed to be powered by a class II power supply (no Earth connection) for maximum flexibility. This sqhub is not designed for safety critical applications: do not rely on it to verify safe conditions before carrying out any potentially hazardous activities. - Page 3 To power off your sqhub at any time, switch off the mains at the outlet or remove the Jack Plug. The sqhub has a power off sequence. Do not plug the Jack Plug back in whilst the LED indicator is Red.
- Page 4 The sqhub Wi-Fi network security password is ‘granthub’ In SquirrelView, your new sqhub will appear in the Device Tree (you may need to click the ‘Refresh Devices’ button in the top-right of the Device Tree if the discovery process is not active). Note that any existing sqhubs on a Wi-Fi network will disconnect whilst this setup is in progress.
- Page 5 Local Area Network Your sqhub will now be available again in the SquirrelView Desktop Software Device tree Tree (you may need to click the ‘Refresh Devices’ button in the top-right of the Device Tree if the discovery process is not active).
- Page 6 7 Connect sq16 & sq16plus loggers to your sqhub Up to two sq16 loggers can be connected directly to the Logger USB ports on the sqhub. More loggers can be connected to the sqhub utilising an external standard USB2.0 hub. A powered hub...
-
Page 7: Technical Specification
Up to 2,000m (6,500ft) Maximum relative humidity: 80% RH up to 31°C Contact Us If you have any feedback on Grant’s products or services, we would like to hear from you. Technical Support and Service Tel: +44 (0) 1763 260811 Email: support@grantinstruments.com... - Page 8 34378 V4 DMN W86...
Need help?
Do you have a question about the sqhub and is the answer not in the manual?
Questions and answers