Advertisement
Quick Links
La Marche Manufacturing Company
www.lamarchemfg.com
LTPB-1
Battery Enclosure
Installation Manual
106 Bradrock Dr. Des Plaines, IL 60018-1967
CPN 135162
Instruction Drawing Number: P25-LLTPB-1
Tel: 847 299 1188
Fax: 847 299 3061
Revision A00
Rev. Date: 10/16
ECN:21270
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Lamarche LTPB-1
- Page 1 La Marche Manufacturing Company www.lamarchemfg.com LTPB-1 Battery Enclosure Installation Manual 106 Bradrock Dr. Des Plaines, IL 60018-1967 CPN 135162 Instruction Drawing Number: P25-LLTPB-1 Tel: 847 299 1188 Fax: 847 299 3061 Revision A00 Rev. Date: 10/16 ECN:21270...
- Page 2 Instruction LTPB-1 The LTPB-1 battery enclosure contains the following equipment: LTP Battery Enclosure Hardware and Velcro Straps 19” Rack Mount Brackets Optional 23” Rack Mount Brackets Interconnecting Controller & OPTIONAL Parallel DC Cables Battery Cables (S8K-LTPB2-2)
- Page 3 Add four bolts to each side bracket and tighten. Rack Mounting (23” optional) The LTPB-1 enclosure can be rack mounted on a standard 19” or 23” relay rack. The instructions below detail mounting on a relay rack. Mount the LTPB-1 battery enclosure to the relay rack.
- Page 4 Using the supplied interconnecting controller cables, connect Once all battery connections have been made, the battery the LTPB-1 to the rectifier system as shown above. The enclosure cover may be installed. Verifying connections are black (-) wire plugs in using a 6 pin connector, the red (+) done properly, the battery breaker can be turned on.
Need help?
Do you have a question about the LTPB-1 and is the answer not in the manual?
Questions and answers