Page 1
Electric Leaf Blower User Manual Model No: STLB-2001...
Page 2
OVERVIEW Features • Cordless • Turbocharging • Battery level display • Super large air volume mode APPLICATIONS • Blow debris or grass clippings off driveways, sidewalks, patios, parks, parking lots, etc. • Gather grass clippings, straws, or leaves into piles. Remove debris from corners, around joints, and between bricks.
Page 3
(1)Safety Guidelines (2)Quick Start Guide (3)User Manual It is recommended to watch all tutorial videos on the official Anykit website and read the safety guidelines before using. Prepare for your first use by reviewing the quick start guide and refer to this user manual for more information.
ABOUT ANYKIT Anykit is a trendy and practical tool brand. We focus on simplicity and ease of use, providing people with convenience in their everyday lives. Our products include leaf blowers, endoscopes, and various household tools to enable DIY enthusiasts to embrace creativity and convenience.
KNOW YOUR PRODUCT 1. Blower Tube 2. Tube Release Button 3. Turbo 4. Handle 5. Battery Release Button 6. Batter Pack 7. On/Off Trigger 8. Battery LED indicators 9. Charger On/Off Trigger Starts or stops the blower Amplifies the air velocity Turbo Button to the maximum Releases the battery pack...
ASSEMBLY Preparing to Assemble the Blower Take care not to lose any instructions. These provide important information which will be required while attached the blower. • Remove all parts of the cordless blower from the box and carefully remove all packaging. •...
Page 9
ASSEMBLY Blower Tube Assembly To remove the tube, press and hold the tube-release button to disengage the latch, then pull the tube straight from the blower.
PREPARATIONS Check the Battery Pack Capacity Battery LED indicators Check the battery pack capacity by pressing the button. ► 1. Indicator lights 2. Button Indicator lamps Remaining capacity 75% to 100% 50% to 75% 25% to 50% 0% to 25%...
PREPARATIONS Charging the Battery 1. Align the battery pack with the slots on the charger and slide it until it locks in place. Release Button Charger 2. Plug the charger cord into a suitable socket. 3. When the charging indicator turns green disconnect the charge from the power supply.
PREPARATIONS Charging the Battery 4. Press the release button on the battery pack and remove the battery from Charger. Release Button Battery Assembly Push the battery pack into the handle until the latch locks into place. Tongue of The Battery Release Button Cordless Blower...
OPERATION Switching On/Off 1. Press the On/Off trigger to turn Turbo on the blower. 2. Press and hold the On/Off Trigger On/Off Trigger and Turbo button simultaneously for high-speed operation. 3. Release the On/Off trigger to turn off the blower. USER TIPS: Hold the blow tube approx 7”...
MAINTENANCE Battery Maintenance • Store the battery pack fully charged. • Recharge the battery pack whenever there is a noticeable reduction in the performance. • Do not allow the battery pack to become completely discharged. • Do not recharge a battery pack that is already fully charged. Overcharging shortens battery life.
MAINTENANCE Storage • Store idle tools. When not in use, the unit should be stored in a dry, high or locked-up place - out of reach of children. • Keep the blower and its handle dry, clean and free from oil and grease.
Page 16
MAINTENANCE The recommended ambient temperature range: Item Temperature Blower storage 32°F (0°C) - 113°F (45°C) temperature range Blower operation 32°F (0°C) - 113°F (45°C) temperature range Battery charging 39°F (4°C) - 104°F (40°C) temperature range Charger operation 39°F (4°C) - 104°F (40°C) tempera ture range Battery storage 32°F (0°C) - 113°F (45°C)
TROUBLESHOOTING Problem Possible Reason Possible Solution Battery pack is not installed Install the battery The blower properly. pack properly. doesn't work Fully charge the Battery is empty. when new. battery pack. Fully charge the The battery pack is depleted. battery pack. Cool down the battery The battery pack or blower The blower...
Page 18
TROUBLESHOOTING Problem Possible Reason Possible Solution The green light Wait for the battery to cool indicator is always The battery pack is too hot. down. on when charging. Use in extreme temperatures, Use the blower in our both hot and cold, can negatively recommended operating impact battery performance.
We will give you a full refund if you are not 30-Day Guarantee satisfied with the product. We offer a limited warranty that commences One-Year Warranty from the date of purchase of the product. Visit anykit.com or scan the QR code for more details.
CUSTOMER SUPPORT If you have any questions or concerns about your product, please contact our Customer Support Team 1-877-888-7979 Mon.-Fri. 8:00-5:00 PST(US) support@anykit.com www.anykit.com @anykit @anykit Facebook Messenger ANYKIT STLB-2001 D0104 V1.0 3.06.06.002100...
Need help?
Do you have a question about the STLB-2001 and is the answer not in the manual?
Questions and answers