SETUP
INSTRUCTIONS
• Place the Skydome swag on a flat
surface free from sharp debris. The
base of the swag is fully waterproof
however a tarpaulin or enviro-mat
may be placed beneath it.
• Unclip the webbing straps and roll
out the swag. Locate the
accessory bag and remove the
aluminium bows, rods and pegs
from their bag
• Sort the aluminium bows into their
position. The head and hip bows
are the same (larger) size, the foot
bow is the smaller size. The body
rod is longer than the leg rod.
• Insert the bows one at a time
through the canvas sleeve at the
apex of the canvas. Insert the ends
of the bows into the small eyelet of
the reinforced floor tabs. Take care
as the bows will be under tension.
• Insert the leg and body rods into
the eyelets provided in the apex
sleeves. Note: The single Skydome
has multiple positions for the body
rod depending on desired amount
of night sky vision.
• Clip the canvas to the head, body
and foot bows. The Skydome swag
is now free-standing.
• Open doors and storm flaps
as required to give access and
ventilation to the swag. For security
or in adverse weather conditions
it is advisable to deploy guy ropes
and peg the base to the ground to
secure your swag.
ACCESSORIES
BootSwag
Need help?
Do you have a question about the SkyDome and is the answer not in the manual?
Questions and answers