Advertisement
Advertisement
Table of Contents
Summary of Contents for Evotech Performance EVO17
- Page 1 USER MANUAL EVO17 Edition 220610AY01...
- Page 2 NOTICE! 1. These instructions are only for EVO17 Dust Extractors. 2. The EVO17 Dust Extractors are designed for cleaning construction site. The EVO17 can be connected to small or medium machines such as drills or grinders. The machine is designed for picking up dry, non-flammable dust and debris in an indoor environment. It is not suitable for picking up liquids.
-
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: WARNING – To reduce the risk of fire, electric shock or injury: Cables damaged through crushing or splitting can be dangerous if used and should be ... - Page 4 and/or filters as described in the manual. If using an extension cord make sure the cord rating is suitable for this machine. Do not modify the machine from its original design. Keep children and unauthorized persons away from the machine when in use. ...
- Page 5 GROUNDING INSTRUCTION The dust extractor must be grounded. If it should malfunction or break-down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The dust extractor is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded with all local codes and ordinances.
-
Page 6: Filter Cleaning
3. FUNCTION The machine is designed for vacuuming and separating dry, non-combustible dust with an explosion limit value of 0.1mg/m The dust extractor is started by the switch. All the switches can operate independently. Type Models with Jet pulse filter cleaning Switch 2 step 0: Motor off, 1: Motor on Notice ！... -
Page 7: Dust Collection System
5. DUST COLLECTION SYSTEM The dust collection system contains a bag holder, nylon puller strap with metal buckle, nylon ties and continuous dropping bags with a size of 357mm*20m*6.5decimillimeter. Equipping the continuous bag: firstly unlock the bag holder, put the continuous dropping bag into the holder, tie up the bottom of the bags with nylon ties, and fasten the nylon puller strap for sealing. -
Page 8: Warranty
Do not puncture the HEPA filter. Risk of dust dispersion. 8. WARRANTY All EVOTECH PERFORMANCE machines and accessories have a 12-month factory warranty starting from the day of purchased Do not attempt to repair the suction apparatus without the consent of the manufacturer. -
Page 9: Problem Solving
9. PROBLEM SOLVING The dust extractors are designed and manufactured for severe environments and tasks, but the user must note that the machine must be protected from knocks and blows. Filter, seals, attachments, and connections are carefully adapted and selected the operator’s work environment. -
Page 10: Technical Data
10. TECHNICAL DATA Data Unit EVO17 Voltage 230V Power (max) Current (UL) Airflow m³/h (max) Vacuum (Max) mbar Water lift (inch) inch Main hose Metric 5m x D38 (mm) Inlet Metric (mm) Pre filter 99.5 EN 779-F8 @1μm Metric Pre filter area... - Page 11 EXPLODED VIEW EVO17...
- Page 12 Flap kits assembly BJ10151 Motor case side BJ1004 Dropping bag holder D20041 Hose BJ1010 Strap holder BJ10051 EVO17 frame BJ1016 EVO17 Barrel fixed plate W301 3 inch wheel P1004 Fixed nut BJ1011 HEPA filter cover P2002 HEPA filter D2005 Rubber sealing BJ1012...
Need help?
Do you have a question about the EVO17 and is the answer not in the manual?
Questions and answers