Download Print this page

Minoston ZW1304 User Manual

Water sensor

Advertisement

Quick Links

FCC
Federal Communications Commission (FCC) Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
IC Caution:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
DECLARATION DE CONFORMITE D'INDUSTRIE CANADA
Ce périphérique a été testé et reconnu conforme aux limites spécifiées dans RSS-210.
Son utilisation est soumise aux deux conditions suivantes :
(1) il ne doit pas provoquer d'interférences gênantes et
(2) il doit tolérer les interférences re.ues, notamment cellessusceptibles d'en perturber le fonctionnement.
WARRANTY
Minoston Products warrants this product to be free from manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product
only and does not extend to consequential or incidental damage to other products that may be used with this product.
This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage,
so the above limitations may not apply to you.
ZW1304 User Manual
ZW1304(Water Sensor) User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZW1304 and is the answer not in the manual?

Questions and answers

Summary of Contents for Minoston ZW1304

  • Page 1 WARRANTY Minoston Products warrants this product to be free from manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product.
  • Page 2 ZW1304 User Manual This warranty gives you specific rights, and you may also have other rights which vary from state to state. if the unit should prove defective within the warranty period. WARNING RISK OF FIRE RISK OF ELECTRICAL SHOCK...
  • Page 3 This product is a battery power ,It's sleep most of the time. ZW1304 is a security enabled Z-Wave Plus® device. A security Enabled Z-Wave Plus® Controller must be used in order to fully utilize the product. GENERIC_TYPE: GENERIC_TYPE_SENSOR_NOTIFICATION SPECIFIC_TYPE: SPECIFIC_TYPE_NOTIFICATION_SENSOR Key Features Support Association Group and Auto Report water status.
  • Page 4 ZW1304 User Manual Product Overview Button Function Description Add/Included into network or Remove/Exclusion from network: Quickly press 1x button Wake-up the device: Quickly press 3x button: Factory Reset: Remove Battery. Press and hold the manual button, reinsert Battery and continue holding the manual button for 3 seconds. to restore the device to the factory [NOTE] Please use this procedure only when the network primary controller is missing or otherwise inoperable.
  • Page 5 ZW1304 User Manual QR Code and DSK The QR code are stocked to the side of the case, DSK is included in the QR code. The DSK code can be found on the DSK label which is attached on the packaging box.
  • Page 6 ZW1304 User Manual Basic Set Mapping Basic CC does not map to any Command Class. Indicator Command Class The indicator (blue color) will flashes according the indicator set command received from HUB. Indicator ID Property ID 0x50 (NODE IDENTIFY) 0x03(ON OFF PERIOD)
  • Page 7 ZW1304 User Manual Configuration Parameters Number Name Information Format / Size Read Only Altering Advanced Default LED Light Mode Set the LED Light Mode. 1 byte unsigned integer LED brightness Set the LED brightness. 1 byte unsigned integer Reset Factory Default Reset sensor to factory defaults.