fluidra Jandy Infinite WaterColors Smart Sync IWCSS60W Installation And Operation Manual

Infinite WaterColors
Model: IWCSS60W
Requires Jandy AquaLink
300W Light Controller (revision 2.46 or later) to operate
Essential installation and startup instructions are included in this manual.
Additional operation and troubleshooting information is available online
by scanning the QR code with your phone or visiting jandy.com
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool
equipment by the jurisdiction in which the product will be installed where such state or local requirements exist.
The maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all
of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning notices
and instructions that accompany this product. Failure to follow warning notices and instructions may result in property
damage, personal injury, or death. Improper installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property
damage, or death. DO NOT MODIFY THIS EQUIPMENT.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and
safe use of this product. This information should be given to the owner/operator of this equipment.
Smart Sync
™
RS (revision Y or later) and Infinite WaterColors
®
WARNING
Installation and Operation Manual
Manuel d'installation et d'utilisation
Manual de instalación y operación
LED Adapter
™
™