Subscribe to Our Youtube Channel
Related Manuals for ServoCity 3207-0002-0002
Summary of Contents for ServoCity 3207-0002-0002
- Page 1 Assembly Instructions for Servo-Driven Gear Rack Kit (Dual Gear Rack) SKU: 3207-0002-0002 TOOLS REQUIRED • 2.5mm Hex Key (L-Key or T-Handle) • 3mm Hex Key (L-Key or T-Handle) • 7mm Nut Driver...
- Page 2 Kit Contents: 1 Hole Low-Side U-Channel 41 Hole Square Beam SKU: 1121-0001-0048 SKU: 1106-0041-0328 QTY: 1 QTY: 2 24 Tooth Servo Gear (H25T Spline) SKU: 2305-0025-0024 QTY: 1 goBILDA 5-Turn Servo (Speed) 1 Hole U-Channel SKU: 2000-0025-0503 SKU: 1120-0001-0048 QTY: 1 QTY: 1 Servo Screw Included with Servo...
- Page 3 Step 1 Step 2 Attach the servo frame to the servo using the four screws and washers included with Using four 12mm length screws and four locknuts, attach the servo frame. Then attach the servo gear the plastic brackets to the 1-Hole Low-Side U-Channel. to the servo spline using the servo screw.
- Page 4 Step 5 Center both gear racks. Four extra screws can be inserted into the beams where shown to help keep them centered. 14 holes 14 holes Placeholder Screws Step 6 Plug the servo into your servo controller and center the servo. Unplug the servo. Assemble the 1-Hole U-Channel with your prevously built assemblies.
Need help?
Do you have a question about the 3207-0002-0002 and is the answer not in the manual?
Questions and answers