MettaX MC201 Installation & User Manual

Table of Contents

Quick Links

Download this manual

Introduction ................................................................................................................................. 2

1. System Overview ....................................................................................................................3

1.1 Product Overview ................................................................................................. 3

1.2.System Connection .............................................................................................. 3

2. Installation Preparation ........................................................................................................... 4

2.1 Installation Technical Requirements .....................................................................4

2.2 Understanding the Installation Environment ......................................................... 4

2.3 Vehicle Condition and Related Electrical Information ........................................... 4

2.4 Vehicle Power Connection ....................................................................................5

3. Preparation for Installation Materials and Tools ......................................................................5

3.1 Package Inventory Check .....................................................................................5

3.3 Preparing Nano SIM Card and Micro SD Memory Card ....................................... 8

4. Installation ...............................................................................................................................8

4.1 Installing SIM Card and Memory Card ..................................................................8

4.2 Choice of Installation Area for the Main Unit ...................................................... 10

4.3 Installation of the main unit. ................................................................................ 11

4.4 Adjustment and Fixation of the device ................................................................11

4.5 Power Connection, Signal Cable, and Cable Connection ...................................12

5.Device configuration .............................................................................................................. 13

6. Acceptance and Cleaning .....................................................................................................13

6.1 Cleaning ............................................................................................................. 13

6.2 Installation Acceptance .......................................................................................13

MC201 Installation User Manual

Contents

1 / 14

Table of Contents

Need help?

Do you have a question about the MC201 and is the answer not in the manual?

Questions and answers

Summary of Contents for MettaX MC201

Page 1: Table Of Contents
MC201 Installation User Manual Contents Introduction ..........................2 1. System Overview ........................3 1.1 Product Overview ....................3 1.2.System Connection ....................3 2. Installation Preparation ......................4 2.1 Installation Technical Requirements ..............4 2.2 Understanding the Installation Environment ............4 2.3 Vehicle Condition and Related Electrical Information ........... 4 2.4 Vehicle Power Connection ..................5...
Page 2: Introduction
Introduction To guide engineers in the correct and efficient installation of MC201 and its accessories, and to improve installation efficiency, this MC201 Solution Installation Guide has been prepared. This document primarily includes: Preamble, System Overview, Installation Preparation, Installation Introduction, Acceptance, and Cleaning.
Page 3: System Overview
1. System Overview 1.1 Product Overview MC201 is an smart AI dash cam with one built-in 2K road view camera and one extended 1080P camera. It helps drivers reduce traffic accidents and assists fleet management in improving efficiency. Based on AI technology, it can proactively detect dangerous driving events and unsafe driving behaviors.
Page 4: Installation Preparation
2. Installation Preparation 2.1 Installation Technical Requirements Installation engineer should be familiar with the product's features, applications, and overall composition. Installation engineer should have knowledge of vehicle circuits, structures, and commonly used installation methods for in-vehicle devices. 2.2 Understanding the Installation Environment Before equipment installation, Installation engineer should have a clear understanding of the vehicle model, installation position of the device, cable types and lengths required for different vehicle models, and the list of commonly used auxiliary materials.
Page 5: Vehicle Power Connection
(3) Check the status of the vehicle's power supply system. *Note: Confirming the above information is crucial. Installation can only proceed after confirmation of normal conditions. 2.4 Vehicle Power Connection It requires the operation of professional installers. The following mainly describes the method of connecting the vehicle's power supply according to the product's power cable requirements.
Page 6 MC201 * 1 Harness * 1 GPS Antenna * 1 3M Tape * 1 Panic Button * 1 Mounting Bracket * 1 External Camera(Optional) Key*1 Relay*1 6 / 14...
Page 7 Installation Materials and Tools List(recommendation) Image Name Uasage Quantity Common Screwdriver Tighten screws, optional 1pcs Crowbar Pry up the vehicle panel 1pcs As per Ties Bundle cables needs Cleaning Cloth Clean the dashboard 1pcs Install the Mxtool App for video Android Phone 1pcs preview and parameter...
Page 8: Preparing Nano Sim Card And Micro Sd Memory Card
Locate vehicle power supply Measure the conduction of Multimeter 1pcs harness Measure pulse signal 3M adhesive tape Fix DMS Camera 1pcs Help to install the BSD Three legged ladder 1pcs camera Waterproof backfill after Waterproof sealant 1pcs punching Waterproof protection for Waterproof tape 1pcs outdoor wire connectors...
Page 9 it means the card is inserted in the wrong direction. In such cases, promptly remove the card to avoid damaging it. If the Micro SD card and SIM card are too small to be inserted into the slot manually, you can place the card into the slot and then use the included pry tool to push it in.
Page 10: Choice Of Installation Area For The Main Unit
4.2 Choice of Installation Area for the Main Unit The installation area requirements for MC201 are as follows: (1) The device must be installed in the middle of the windshield. Typically, it is installed in the area above the center line of the windshield, in the vicinity of the rear-view mirror.
Page 11: Installation Of The Main Unit
4.3 Installation of the main unit. 1. Park the vehicle on a level surface. 2. Clean the inside and outside of the target installation area on the windshield using an alcohol swab. Ensure that there is no dirt or debris on the glass that could obstruct the view of the road condition monitoring lens.
Page 12: Power Connection, Signal Cable, And Cable Connection
a) The center of the cabin should be positioned in the middle of the screen. b) The cabin screen should be horizontal. c) The vehicle's steering wheel should be displayed in the lower left/right corner of the screen. The properly adjusted cabin monitoring camera rendering is shown below: *Note: Only when the device is securely connected to the vehicle, can the device be powered on.
Page 13: Device Configuration
*Note: The power line should preferably be connected using "dedicated non-stripping connectors" (no need for stripping, to avoid the risk of electric leakage) and wrapped with insulating tape to prevent electric leakage/short circuit. If there are no special non-stripping connectors available, stripping wires can also be used for the connection.
Page 14 Conduct acceptance based on the acceptance checklist provided by the customer, focusing on the installation details and parameter settings. (1) Pay close attention to the parameter settings and take screenshots for documentation. (2) Verify the video image quality and capture and save sample videos. After the installation is complete, take photographs of all the devices and the central console.