Related Manuals for Aeroex ARO-2000
Summary of Contents for Aeroex ARO-2000
- Page 1 Aeroex Technologies Inc. Oil Mist Collector Model ARO-2000 Multi-Stage Installation & Service Manual www.aeroex.com 705-734-0199 sales@aeroex.com orderdesk@aeroex.com 01/20 www.aeroex.com orderdesk@aeroex.com...
-
Page 2: Table Of Contents
Table Of Contents Specifications…………………………………….………….…………3 Installation Instructions……….………..…………….……………4 Installation Kit.................5 Oil drain hose Kit................5 Electrical Connection..............6 Direction of rotation................6 Wiring Connection................7 Maintenance...................8 Filter options Coolant..............9 Filter options Oil................10 Dimensions..................11 Warranty..................12 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 3: Specifications
Model ARO-2000 Specifications AEROEX – Oil Mist Collector For highly effective separation of coolant and oil mists including smoke from metalworking machinery and oil reservoirs. Consisting of: Powdered coated mild steel housing. Motor and fan impeller or Motorized impeller -For Coolant, the primary separation pack consists of a 1st stage ME and 2 stage AG agglo, stage fiber bed filter. -
Page 4: Installation Instructions
Loop in hose must be minimum 8” below mist collector, no max. See instructions page • Fill loop with water or oil to create air lock. • Install motor starter and set overloads. • Connect electrical power. • Check motor direction as per arrow on motor. Typical installation: 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 5: Installation Kit
Oil drain bracket A99SPM-0002 1(c) Nipple 099MPB-0001 1(d) Hose clamp 099MHH-0002 Installation: Loop in oil drain hose is required to create air lock. Fill with water, coolant or oil. Failure to install correctly will result in no oil draining 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 6: Electrical Connection
Most electrical technicians/contractors will be able to supply motor starter panel or install motor contactor in cnc machine electrical panel. Aeroex offers a selection of motor starter panels as listed below: Manual Motor Starter Motor Starter Panel Start/stop, overloads, no... -
Page 7: Wiring Connection
Wiring Connection 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 8: Maintenance
HEPA filter replacement: Replace when magnehelic pressure gauge reaches the red zone. Note: If filter stages 1 – 3 or chip strainer are plugged, no air flow will go to 4 stage HEPA filter and pressure reading can reduce. 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 9: Filter Options Coolant
“HF” HEPA Filter 95% @ 0.3 2000HF-2095 microns stage “HF” HEPA Filter HEPA 99.97% @ 2000HF-2099 0.3 microns (Optional) stage “HF” Odor-Rid HEPA Filter 2000HF-3095 (Optional) Note: Please check filter part # installed in mist collector. 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 10: Filter Options Oil
“HF” HEPA Filter 95% @ 0.3 2000HF-2095 microns stage “HF” HEPA Filter HEPA 99.97% @ 2000HF-2099 0.3 microns (Optional) stage “HF” Odor-Rid HEPA Filter 2000HF-3095 (Optional) Note: Please check filter part # installed in mist collector. 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 11: Dimensions
Dimensions 01/20 www.aeroex.com orderdesk@aeroex.com... -
Page 12: Warranty
AEROEX shall not be liable for special or consequent damages in case of any failure, claims for labour, loss of profits, repairs, alterations, or other expenses incidental to replacement of defective parts or return of the equipment.
Need help?
Do you have a question about the ARO-2000 and is the answer not in the manual?
Questions and answers