1. Manuals
  2. Brands
  3. AlphaTheta Manuals
  4. DJ Equipment
  5. DJM-V10
  6. Service manual

AlphaTheta DJM-V10 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DJ MIXER
DJM-V10
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DJM-V10
LSYXJ
DJM-V10
UXJCB
DJM-V10
XJCN
THIS SERVICE MANUAL SHOULD BE USED TOGETHER WITH THE FOLLOWING MANUAL(S).
Model
DJM-V10
6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa 220-0012 JAPAN
© 2020
Power Requirement
AC 110 V to 240 V
AC 120 V
AC 220 V
Order No.
RRV4704
SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM, PCB PARTS LIST
DJM-V10
Remarks
ORDER NO.
RRV4703
Remarks
K-ZZZ FEB. 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJM-V10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AlphaTheta DJM-V10

Summary of Contents for AlphaTheta DJM-V10

  • Page 1 ORDER NO. RRV4703 DJM-V10 DJ MIXER DJM-V10 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). Model Type Power Requirement Remarks DJM-V10 LSYXJ AC 110 V to 240 V DJM-V10 UXJCB AC 120 V DJM-V10 XJCN AC 220 V THIS SERVICE MANUAL SHOULD BE USED TOGETHER WITH THE FOLLOWING MANUAL(S).

  • Page 2: Table Of Contents

    8.4 USER SETABLE ITEMS .............................109 9. EXPLODED VIEWS AND PARTS LIST..........................111 9.1 PACKING SECTION ..............................111 9.2 EXTERIOR SECTION..............................113 9.3 CHASSIS SECTION (1/2) ............................115 9.4 CHASSIS SECTION (2/2) ............................117 9.5 CONTROL PANEL SECTION (1/3)..........................119 9.6 CONTROL PANEL SECTION (2/3)..........................121 9.7 CONTROL PANEL SECTION (3/3)..........................123 DJM-V10...

  • Page 3: Service Precautions

    12V r 7V DC/DC Converter IC with heat-pad HPPW Assy AK5578EN IC4701 CH1 to CH4 ADC IC with heat-pad AIN Assy AK5574EN IC4801 CH5, CH6 ADC IC with heat-pad *1 : Refer to "1.3 SERVICE NOTICE"_" Confirmation of user-setting". DJM-V10...

  • Page 4: Service Notice

    If you replace LED on the Control panel alone, be sure to confirm if there are any major differences in color and brightness from the surrounding LEDs of the same color. If there is a difference, replace the other LEDs at the same time. DJM-V10...

  • Page 5: Specifications

    HI ............–12 dB to +12 dB (10 kHz) (XJCN: DRH1580) LOW..........–12 dB to +12 dB (100 Hz) BOOTH MONITOR equalizer feature Warranty HI ............–12 dB to +6 dB (3 kHz) (LSYXJ only) LOW........... –12 dB to +6 dB (300 Hz) DJM-V10...

  • Page 6: Basic Items For Service

    No scratches or dirt on its appearance after receiving it for service. See the table below for the items to be checked regarding audio. Item to be checked regarding audio Distortion Volume too high Noise Volume fluctuating Volume too low Sound interrupted DJM-V10...

  • Page 7: Jigs List

    The file is uploaded to Niis. Refer to "8.3 WRITING THE SERIAL NUMBER OF THE UNIT." Lubricants and Glues List Name Part No. Remarks Lubricating oil (FLOIL G-424Z) GEM1107 Used for "9.5 CONTROL PANEL SECTION (1/3)". Refer to "7. DISASSEMBLY". DJM-V10...
  • Page 8 DJM-V10 Service check sheet Check contents Check target Operation part, Setting Display part (LED) Display part (LCD) Status Check Version display Firmware ———— ———— Version SYSTEM SYSTEM Ver. MAIN MAIN Ver. MAIN-BOOT MAIN-B Ver. MAIN-UPDATE MAIN-UP Ver. Ver. DSP-BOOT DSP-B Ver.
  • Page 9 MASTER CUE B Master Level indicator Rch LED Volume AD Rotary volume AD ———— ———— VOL AD Operation is unnecessary value check value fluctuation range Fader AD Fader AD value ———— ———— FDR AD Operation is unnecessary value check fluctuation range DJM-V10...

  • Page 10: Pcb Locations

    Only printed information is different, because their part numbers and wiring numbers are different. They are handled similarly in their production management. Therefore, either 1, 2 or 3 Assy of the respective Assys is assembled in the respective place. DJM-V10...
  • Page 11 Only printed information is different, because their part numbers and wiring numbers are different. They are handled similarly in their production management. Therefore, either 1, 2, 3, 4, 5 or 6 Assy of the respective Assys is assembled in the respective place. DJM-V10...
  • Page 12 DWX4341 2..CHF4 ASSY DWX4361 2..LEDB ASSY DWX4342 2..CHF5 ASSY DWX4362 2..LCDB ASSY DWX4343 2..CHF6 ASSY DWX4363 2..FGP1 ASSY DWX4395 2..CCB1 ASSY DWX4410 2..CRFDG ASSY DWX4396 1..PNLR ASSY DWX4345 2..SWBTM ASSY DWX4397 2..SWTOP ASSY DWX4398 > 1..SW POWER SUPPLY DWR1581 DJM-V10...

  • Page 13: Block Diagram

    4. BLOCK DIAGRAM Note: The 1 to 3 Assys of SNRT Assys have the same circuitry, parts, and board shapes. Only printed information is different, because their part numbers and wiring numbers are different. They are handled similarly in their production management. Therefore, either 1, 2 or 3 Assy of the respective Assys is assembled in the respective place.

  • Page 14: Overall Wiring Diagram (2/2)

    When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Note: : The power supply is shown with the marked box.

  • Page 15: Overall Block Diagram

    AK4113VF CH6 SRC DOUT SRC DOUT DIT DRIVER CH6 DIR CH6_DIGI_DATA D_OUT_DATA Pulse Trans DIN6 IC2806 DIGITAL MASTER OUT IC2804 IC2902 IC2904 IC2905 CS8421-CZ VL2901 AK4113VF CS8421-CZ AK4104ET ADM3485ARZ IC1502 QSPI FLASH ROM (64Mb) (SPI Serial NOR FLASH) DYW2190 DJM-V10...

  • Page 16: Dsp Block Diagram

    MASTER MIX EXT 1 to MASTER (EXTERNAL) USB FX SEND CHx SEND RETURN EXT 1 RETURN U SB EXT 1(SEN D EXT ERN AL) EXT 2 RETURN to CH INPUT U SB EXT 2(SEN D EXT ERN AL) EXT 2 DJM-V10...

  • Page 17: Power Block Diagram

    REGB ASSY V+15A V+15U AOUT ASSY AIN ASSY IC5353 NJM7815FA V-15A V-15U IC5352 LM7915CT@V V+3R3A V+5A IC4008 V+5A IC5351 V+5U MM3571A33P NJM7805FA CN4002 CN5401 CN5403 CN4001 CN5351 CN10 CN12 IC1901 V+3R3D SUB_DSP V+3R3D_DIGI IC207 D810K013DZKB456 V+1R285D MM3571A33P MAIN ASSY INLET V+2R5D IC208 MM3479A25P...

  • Page 18: Diagnosis

    RST_PNL1_PNL2 [HIGH] BOOT/Initialization Handshake request 50M_PHY_CLK Handshake permission V+5D_CONT [HIGH] V+5D_CONT ON DDR 3_RESETn [HIGH] DDR3 reset canceling DDR _XRST [HIGH] DDR3 reset canceling AM_OFF [HIGH] LAN_XRESET [HIGH] LANPHY reset canceling Key decision wait(? ms) Mode judgment 3rd BOOT DJM-V10...
  • Page 19 SDSP start instructions Program transmission SDSP_XRST [HIGH] BOOT Start completion notice SDSP start completion notice DSP start instructions Start completion notice LinkCue handshake request LinkCue handshake permission 3000 ms (noise measures) Start completion notice MUTE_OUT [HIGH] Software muting canceling MUTE canceling DJM-V10...

  • Page 20: Matrix Information

    CHF2 CROSS FD1 CRFB HP B MIX BFXB CH3 FD CHF3 CROSS FD2 CRFB LEVEL/DEPTH BFXB CH4 FD CHF4 CROSS FD0 CRFB CHF5 HP B LEVEL BFXB CH5 FD VR_SELECT TCP_YIN Touch panel CH6 FD CHF6 TCP_XIN Touch panel DJM-V10...
  • Page 21 MIDI ON/OFF EFECT ON/OFF USB_S/R SND/RTN ON_OFF Assy Name PNLL PNLL PNLL BFXB PNLR PNLR Function Name CH1_CUE A CH2_CUE A CH3_CUE A CH4_CUE A CH5_CUE A CH6_CUE A MASTER_CUE A Assy Name CUEVR CUEVR CUEVR CUEVR CUEVR CUEVR CUEVR DJM-V10...

  • Page 22: Troubleshooting

    PHONES A/B CH1/LINE 0 dBV 1 kHz PHONES LEVEL VR Center All EQs Center / FADER Max DIGITAL OUT CH1/LINE 0 dBV 1 kHz — All EQs Center / FADER Max Measure the output diagnosis at the CH1 LINE input. DJM-V10...
  • Page 23 Check for the status of soldering and replace it. PNL1 UCOM UCOM Assy If the symptom persists after the above The PNL1 UCOM (IC8406) may be defective. — defect IC8406 corrections. Check for the status of soldering and replace it. DJM-V10...
  • Page 24 ! If an output signal can be confirmed, go to step 4. — MASTER/BOOTH R2117 (MDAC_MCLK) diagnostics point. ! If not, the circuit or the parts around IC2001, 2-1-4-3 DAC (IC2101) [CLK of MASTER/BOOTH DAC] IC2003, IC2006, IC2014 and IC2101 may be R2117 (3.3 V 24 MHz) defective. Replace its. DJM-V10...
  • Page 25 Reference Other defects — — Replace MAIN Assy. — [2-1-6] "E-0020" is displayed A setting error of DIT was generated. Step Cause Diagnostics Point Item to be Checked Corrective Action Reference Other defects — — Replace MAIN Assy. — DJM-V10...
  • Page 26 [2-1-9] "E-0100" is displayed LAN Reset error was generated. Step Cause Diagnostics Point Item to be Checked Corrective Action Reference Other defects — Refer to "[7] LAN". If the problem persists after checking "[7] LAN", [7] LAN replace MAIN Assy. DJM-V10...
  • Page 27 (3.3 V amplitude) IC2010, IC2011, IC2012, IC2013, IC1801, (MDSP_LRCK1-3) MDSP_LRCK1-3 (3.3 V amplitude) IC1802 and IC1101 may be defective. 2-1-11-2 If the parts other than IC2002 and IC1101 are defective, replace its. If IC2002 or IC1101 is defective, replace MAIN Assy. DJM-V10...
  • Page 28 Cause Diagnostics Point Item to be Checked Corrective Action Reference — — — ! If anything is displayed on the LCD, refer to [5] LCD each error display contents. 5.6 STARTUP ! If nothing, refer to [5-1]. ERROR DISPLAY DJM-V10...
  • Page 29 High or Low) at the diagnostics circuit. defective. Or the circuit to IC1101 may be Representative CH1 defective. Check for the status of connection and soldering, and replace it. 3-1-5 ! If not, IC1101 or the circuit around it may be defective. Replace MAIN Assy. DJM-V10...
  • Page 30 High or Low) at the diagnostics circuit. defective. Or the circuit to IC1101 may be defective. Check for the status of connection 3-3-4 and soldering, and replace it. ! If not, IC1101 or the circuit around it may be defective. Replace MAIN Assy. DJM-V10...
  • Page 31 High or Low) at the diagnostics circuit. defective. Or the circuit to IC1101 may be defective. Check for the status of connection 3-5-3 and soldering, and replace it. ! If not, IC1101 or the circuit around it may be defective. Replace MAIN Assy. DJM-V10...
  • Page 32 4-1-7 following places and replace it. - IC5701 - IC5702 - The circuit around its ! If not, Q5701, Q5702 ,Q5703, Q5704 and the circuit around its may be defective. Check for the status of soldering and replace it. DJM-V10...
  • Page 33 Check for the status of soldering of the 4-2-8 diagnostics circuit. following places and replace it. - IC6001 - The circuit around it ! If not, Q6001, Q6002 and the circuit around its may be defective. Check for the status of soldering and replace it. DJM-V10...
  • Page 34 Confirm the audio signal (sine wave) at the of the following places and replace it. CN6352 3 pin diagnostics circuit. - RY6351 (HP_B_ROUT) - The circuit around it ! If not, the 3 pin wire of HPJK have a 4-3-12 connection defect. Replace it. DJM-V10...
  • Page 35 X1501 and IC1101 5-2-4 C1514 side C1514 side (1.8 V 24 MHz) may be defective. If the parts other than IC1901 are defective, replace its. If IC1901 is defective, replace MAIN Assy. DJM-V10...
  • Page 36 10.83 WAVEFORMS /Circuit defect 1 pin, 2 pin, 3 pin, 4 pin of CN8902. between IC8406 and CN8902 may be 6-3-1 defective. Replace the parts. ! If not, the touch panel have a defective. 6-3-2 Replace it. 6-3-3 6-3-4 DJM-V10...
  • Page 37 PNL2 UCOM (IC8409) Signal abnormality R8591 8-3-2 ! Confirm the voltage of the CROSS_FADER circuit. may be defective. 8-3-3 R8596 ! Confirm the CROSS_FADER signal at the Repair the defective soldering. R8592 8-3-4 diagnostic point during operating the Crossfader. DJM-V10...
  • Page 38 (Not fixed of 0 V) in the following places. L1701 - Between IC1101 and CN14 1 pin, 4 pin - Between CN3051 and JA3051 (USBC_DP/USBC_DM) If the parts other than IC1101 are defective, replace its. If IC1101 is defective, replace MAIN Assy. DJM-V10...
  • Page 39 MAIN Assy and UCOM Assy, UPD_PNL1_MDSP IC8406, R8574 and and replace the defective Assy. line CN8413 ! If not, the parts may be defective. Replace its. MAIN Assy Between CN7, R23, R1581 and IC1101 (UPD_PNL1_MDSP) 12-1-2 DJM-V10...

  • Page 40: Information On Power Diagnostics

    Then the V+12M, V+15U, V-15U, V+5U power from SW POWER SUPPLY will be stopped. Identify which power-supply IC is defective, by duplicate drawing and inserting of the power cord while monitoring each voltage with an oscilloscope. Check the value of each voltage immediately before stopping power supply. DJM-V10...
  • Page 41 6.24V V+5D_MDSP 6.61V R 2 8 2 R 2 6 8 6.43V 3.70V V+5A 4 . 7 k 4 . 7 k V+9LED 10.99V 7.02V V+15A 12.13V V-15A -11.19V GNDD GNDD V-15A V-7HP GNDD GNDD V-7HP -4.94V V-15A V-7HP DJM-V10...

  • Page 42: Cuevr Assy Diagnosis Method

    3 Lift up the UCOM Assy, and diagnose CUEVR Assy. (CN8406, 8410, 8412, 8420) Remove the barrier as needed. CUEVR Assy UCOM Assy CN8412 CN8412 CN8410 CN8410 CN8420 CN8420 CN8406 CN8406 UCOM Assy UCOM Assy 2 Remove the 4 screws. Barrier (BBZ30P060FTC) Diagnosis UCOM Assy UCOM Assy DJM-V10...
  • Page 43 CN8414 CN8414 UCOM Assy UCOM Assy CN8419 CN8419 2 Remove the 4 screws. (BBZ30P060FTC) UCOM Assy UCOM Assy 3 Lift up the UCOM Assy, and diagnose CUEVR Assy. Remove the barrier as needed. CUEVR Assy UCOM Assy Barrier Diagnosis DJM-V10...

  • Page 44: Startup Error Display

    Communication error of PNL1 UCOM and MAIN CPU/DSP at startup flashes (cycle of 3 seconds). Unit MIDI ON LED on Unit flashes (cycle of 250 milliseconds). LED of Communication error of PNL2 UCOM and PNL1 UCOM at startup Unit DJM-V10...
  • Page 45 LED debug LED C1931 C1158 Q1901 C1166 CN1901 R1940 X1502 R1847 MDSP_ R1815 C1174 R1732 R1709 D1901 IC801 C1113 C804 R1942 C1119 C1140 L1104 C496 C1114 C503 VAUX1 R1706 C1050 C1121 C1112 MIDI ON MIDI START/STOP (WAKE UP) DJM-V10...

  • Page 46: Connection Check With Each Interface

    Input with "Device Manager" in the search box of the task bar. Devices to be added: " Universal Serial Bus controllers USB Composite Device " Under “Sound, video and game controllers” DJM-V10 DJM-V10 " Human Interface Device HID-compliant vender-defined device USB Input Device A communication check may be easily performed if connection is made with Device Manager displayed on the PC screen.

  • Page 47: Service Mode

    Start up the unit in Mode 1 of Test mode. To exit from Test mode; press the button to turn the unit off. button SEND button (SHORT DELAY) TAP button CH1 CUE A button LINK CUE button BEAT FX ON/OFF button DJM-V10...
  • Page 48 BEAT FX BEAT FX ON/OFF ON/OFF Mode 6 Mode 13 SW checking mode VOL A/D checking mode BEAT FX BEAT FX ON/OFF ON/OFF Mode 7 Mode 14 VOL checking mode Fader A/D checking mode BEAT FX BEAT FX ON/OFF ON/OFF DJM-V10...
  • Page 49 SYSTEM SYSTEM MAIN MAIN MAIN-BOOT MAIN-B MAIN-UPDATE MAIN-UP DSP-BOOT DSP-B SRCDSP SRC DSP AM3352 AM3352-BOOT AM-B AM3352-UPDATE AM-UP PANEL1 PANEL1 PANEL1-BOOT PANEL1-B PANEL2 PANEL2 PANEL2-BOOT PANEL2-B [Display] [Notes] None Mode 2: Crossfader setting mode Refer to "6.2 CROSSFADER CALIBRATION". DJM-V10...
  • Page 50 + This is shown for about 1 second from the start of the mode. [Element] [TAP button] (Lighting) : Mode change (to next mode) [BEAT FX ON/OFF button] (Lighting) : Mode change (to previous mode) [Notes] LCD brightness should be MAX. Lighting parts: DJM-V10...
  • Page 51 ! The Self-lighting button is turned off when it is pressed. ! The status of the button you pressed is displayed at ****** in the upper left on the display. ! When pressing of all buttons is completed, [OK] will be displayed on the right side of RESULT. DJM-V10...
  • Page 52 BEAT > FX FREQUENCY (LOW) FX FREQUENCY (LOW) LED FREQ L FX FREQUENCY (MID) FX FREQUENCY (MID) LED FREQ M FX FREQUENCY (HI) FX FREQUENCY (HI) LED FREQ H BEAT FX ON/OFF BEAT FX ON/OFF LED EFX ON [Notes] None DJM-V10...
  • Page 53 ! Check the TIME of the rotary encoder at the same time. If -100 to +100 is displayed, the check is completed and - or + is highlighted in red. ! When all the checks are completed, [OK] is displayed on the right side of RESULT. DJM-V10...
  • Page 54 :EXT2 -9 dB A (USB A) 12 dB B (USB B) 9 dB :DIGITAL 6 dB :LINE 3 dB Input selector switch Channel level indicator :PHONO 0 dB :BUILT-IN -3 dB :EXT2 -6 dB :BUILT-IN, EXT1, EXT2 -9 dB DJM-V10...
  • Page 55 -3 dB :REVERB -6 dB :SHIMMER -9 dB BEAT FX selector switch Master level indicator :FLANGER -12 dB R CH :PHASER -15 dB :FILTER -18 dB :TRANS -21 dB :ROLL -24 dB :PITCH -27 dB :VINYL BRAKE -30 dB DJM-V10...
  • Page 56 TIME knob Operation range Default Value Max value : 100 Min. value : -100 Min. value Default Value Max value Counter Clockwise clockwise [Figure of correspondence] [Notes] None DJM-V10...
  • Page 57 ! When all the checks are completed for each group, [OK] is displayed on the right side of RESULT. Group 1 Group 2 Group 9 BEAT BEAT BEAT Value display Display the item name of each rotary volume. + X: Group number + xxxx: Operation volume DJM-V10...
  • Page 58 "+6" : Full Illuminate Master level indicator "- " : Lights off MASTER ISOLATOR HI knob L CH "+6" : Full Illuminate Master level indicator "- " : Lights off MASTER ISOLATOR MID knob R CH "+6" : Full Illuminate DJM-V10...
  • Page 59 EQ (LOW) knob CH6 "+6" : Full Illuminate Master level indicator "- " : Lights off BOOTH LEVEL knob L CH "0" : Full Illuminate Master level indicator "MIN" : Lights off LEVEL/DEPTH knob R CH "MAX" : Full Illuminate DJM-V10...
  • Page 60 "0" : Full Illuminate Master level indicator "CUE" : Lights off HEADPHONES B MIX knob L CH "MASTER" : Full Illuminate Master level indicator "- " : Lights off HEADPHONES B LEVEL knob R CH "0" : Full Illuminate DJM-V10...
  • Page 61 [Figure of correspondence] : Group 1 : Group 2 : Group 3 : Group 4 : Group 5 : Group 6 : Group 7 : Group 8 : Group 9 [Notes] None DJM-V10...
  • Page 62 : Mode change (to next mode) [BEAT FX ON/OFF button] (Lighting) : Mode change (to previous mode) [Default] All LED light off, and Touch display shows Group 1. [Procedure] Press [BEAT button] to select Group. Touch display indication will change. DJM-V10...
  • Page 63 White (Brightness : 5) (Left edge is white, Right edge is black) Group 2 Group 5 Color 7 color bar Brightness : 4 (White, Yellow, Light blue, Green, Pink, Red, Blue) Group 3 Group 6 Black Brightness : 3 DJM-V10...
  • Page 64 Group 7 Group 11 Brightness : 2 Green Group 8 Group 12 Brightness : 1 Blue Group 9 Group 13 Brightness : 0 (Screen saver) Checks Group 10 DJM-V10...
  • Page 65 ! When all the squares are touched, the check is completed. (OK is displayed.) ! The touched point is displayed. (Example: light blue square) ! The AD value of the Touch panel is displayed. Coordinate value converted to 320 x 240 are displayed in (xxxx). (The upper left corner is (0, 0)) DJM-V10...
  • Page 66 +3 : "EE" indication even when Subnet Mask is not finalized. +4 : Refer to "5.3 TROUBLESHOOTING_[12] Firmware update". [Notes] In order to acquire the IP Address and Subnet Mask, it is necessary to connect to the computer with a LAN cable. DJM-V10...
  • Page 67 This mode is used for Design and for Development. Not used in Service. Mode 14: Fader A/D checking mode [Functional overview] It is a mode checking on fluctuation range of the AD value of the fader with Touch display. DJM-V10...
  • Page 68 Check the unit goes into standby state after 1 minute. Only MIDI START/STOP (WAKE UP) button LED lights on in standby state. Pressing MIDI START/STOP (WAKE UP) button will cancel standby state. button SEND button (DUB ECHO) CH2 CUE A button LINK CUE button DJM-V10...
  • Page 69 - You write the serial number to the unit [Operation] While holding the LINK CUE, CH1 CUE A and SEND (EXT2) buttons pressed, press the button to turn the unit on. button SEND button (EXT2) CH1 CUE A button LINK CUE button [Display] DJM-V10...
  • Page 70 MIDI START/STOP (WAKE UP) button [Details] 1 Choose [YES] and click [OK]. 2 It is indicated with [PLEASE POWER OFF], and factory setting returns to a factory shipment state. Please turn off the power. DJM-V10...

  • Page 71: Crossfader Calibration

    ! The most left column displays the current AD value, and the other columns display the AD values stored in flash memory. If there is no stored AD value, "0000" is displayed. ! [BEAT FX ASSIGN MASTER LED] lights on in the initial state. DJM-V10...
  • Page 72 (2) The setting of A1 Move Crossfader to A1 and press [BEAT FX ASSIGN CH1 button] button. When AD value is confirmed, it is displayed in the A1 column. [BEAT FX ASSIGN CH1 LED] light off. Touch display DJM-V10...
  • Page 73 At that time, take your hands slowly so that the fader does not move. Otherwise, the position will change due to the cushion at the end of the fader. When AD value is confirmed, it is displayed in A2 column. [CUE A CH1 LED] light off. Touch display DJM-V10...
  • Page 74 If all three times fail, the result is NG. ! The AD value set in this mode becomes effective immediately after saving. ! If it becomes NG, the setting can be started again without changing the mode. DJM-V10...

  • Page 75: About The Device

    AIN Assy IC5102 MIC ADC ADC for MIC1, MIC2 AK5358AET IC5203 AIN Assy 3.5 inch TFT LCD Display device DWX4228 DJM-V10 PNL1 UCOM Main control, DYW**** IC8406 UCOM Assy KEY, VR, Touch panel control PNL2 UCOM LED, Fader_VR control DYW****...

  • Page 76: Disassembly

    DAA1419 DNG1133 DAC2685 DAC3539 DNK5888 DAC2685 DAC3238 DNK6440 DNG1133 Silver DAC2685 DAC2685 White Black White (rubber) DAA1419 White Black DAC3539 DAC3238 Black Note DNG1133 is nonreusable to fix it with DS tape to a knob. Gray DNK5888 DNK6440 Gray DJM-V10...
  • Page 77 2 Pull the Slider knob 2 out upward. 2 Insert the Knob, paying attention to its orientation. 3 Pull the Knob out upward. 3 Insert the Slider knob 2, paying attention to its orientation. 4 Pull the Slider Knob Stopper (Stopper) out horizontally. DJM-V10...
  • Page 78 Remove the one screw and then remove the HPJC Assy. (BBZ30P060FTC) Screw tightening order • Rear view Stay Notes on assembling At the panel assembling, tighten the screws while pressing the panel like the figure below in the direction of the arrow. DJM-V10...
  • Page 79 Be sure to use the following screw at the reassembling! • Rear view BBZ30P060FTB Screw tightening order Remove the 25 screws and then remove the Control panel and Panels. (DBA1451) Caution : Be sure to use the following screw at the reassembling! DBA1451 Panel Control panel DJM-V10...
  • Page 80 When attaching it, make sure that the DS tape does not Be careful not to protrude from the hole of the Control panel. lost Lens. Be careful not to lost Lens. Be careful not to lost Holder. [1-4] Control panel Section Remove the 12 Sheets. DJM-V10...
  • Page 81 Disconnect the 2 FFCs. the part shown in the figure below on (CN7, 9) the rear panel. Control panel Section Do not damage the FFC at the chassis edges. DJM-V10...
  • Page 82 Disconnect the 2 connectors. (CN3151, 3152) Remove the 2 screws. (BBZ30P060FTC) Remove the USBP Assy while sliding it in the CN3152 CN3152 direction of the arrow. CN3151 CN3151 USBP Assy [2-3] USBA and USBB Assy Release the 5 points of jumper wire. DJM-V10...
  • Page 83 Attach so that the hook is inserted into the slit of the board. [2-4] MTRM Assy Remove the 2 screws MTRM Assy (BBZ30P060FTC) Disconnect the BtoB connector and then remove the MTRM Assy with stay. CN6251 CN6251 (CN6251) Screw tightening order CN5201 CN5201 MTRM Assy DJM-V10...
  • Page 84 Pass the cable from the hole. Shield plate [2-6] AIN Assy Remove the 2 screws. (BBZ30P060FTC) Disconnect the 3 connectors. (CN4003, 4004, 4005) Screw tightening order AIN Assy AIN Assy CN4003 CN4003 CN4004 CN4004 CN4005 CN4005 Cord clamper DJM-V10...
  • Page 85 Remove the 8 Plug/PINs. Remove the 6 screws. (BPZ30P080FTB) Remove the one washer and one nut. (DEC2920, NKX2FNI) Remove the 2 screws. (PPZ30P080FTB) • Rear view Screw, Washer and Nut tightening order 2 3 4 5 6 DJM-V10...
  • Page 86 Stand the AIN Assy in the fig. Control panel Section Reconnect the Control panel Section etc. AIN Assy AOUT Assy SNRT1 Assy Diagnosis SNRT2 Assy SNRT3 Assy HPJK Assy PSWB Assy HPJM Assy MAIN Assy SW POWER HPPW Assy SUPPLY REGB Assy DJM-V10...
  • Page 87 (BBZ30P060FTC) Disconnect the 4 connectors. (CN5404, 5405, 5406, 7701) Unlock the PCB holder. Screw tightening order CN7701 CN7701 CN5404 CN5404 CN5405 CN5405 CN5406 CN5406 Remove the 12 nuts and 12 washers. Nut and Washer tightening order • Rear view DJM-V10...
  • Page 88 Hooks being inserted in the slits of the chassis. Jumper wire pass the locking mini clamp. CN5404 CN5404 (White) (White) CN5405 CN5405 (Red) (Red) Jumper wire pass the wire clip. CN5406 CN5406 Clamp the Cord clamper. CN5407 CN5407 (Blue) (Blue) (Yellow) (Yellow) DJM-V10...
  • Page 89 Screw tightening order Front Cover Shield case Release the 3 Jumper wires stylings. SW POWER SUPPLY Disconnect the 4 connectors. (P1, 2, 3, 4) Remove the 3 screws. (ABZ30P060FTC) Unlock the Spacer and then remove the SW POWER SUPPLY. DJM-V10...
  • Page 90 Caution: Before attaching Chassis, you must attach a thermal sheet to Cover. CN12 CN12 Otherwise, the regulator in the center will be damaged and the product will break down. DJM-V10...
  • Page 91 Remove the one screw and then remove the MAIN Assy AOUT Assy Stay Stay. (BBZ30P060FTC) Disconnect the one bridge connector. (CN5402) Disconnect the one FFC and one connector. (CN4, 6) CN5402 CN5402 Remove the 15 screws. (BBZ30P060FTC) CN5401 CN5401 Screw tightening order CN5403 CN5403 DJM-V10...
  • Page 92 Screw, Waher and Nut tightening order AOUT Assy k l MAIN Assy AOUT Assy k l MAIN Assy AOUT Assy k l MAIN Assy Pull out the MAIN and AOUT Assemblies to MAIN Assy AOUT Assy front direction and then remove it. DJM-V10...
  • Page 93 Cable of the UCOM side passes the top. • Bottom view Put the jumper wire to the hook. Channel fader Section Channel fader Section Remove the 12 screws and then remove the 6 Channel fader Sections. (BSZ20P040FTB) Screw tightening order DJM-V10...
  • Page 94 Remove the one screw and then remove the (BFXB) (BFXB) SWBTM Assy. (BBZ30P060FTC) SWTOP Assy SWBTM Assy Remove the 2 screws and then remove the CRFSW Assy CRFSW Assy. (DBA1451) Notes on assembling Sheet Nonreusable to fix it with DS tape. Slide SW Cap (W) DJM-V10...
  • Page 95 (BBZ30P060FTC) Holder Section Holder Section Notes on assembling Insert the Holder Section to the VR. Insert the Jig (GGF1732). Tighten 2 screws according to order. Remove the jig. Confirm that the tip of VR sticks out from the jig. DJM-V10...
  • Page 96 Remove the 2 screws and then remove the (BFXB) (BFXB) Cross Fader Service Assy. (BBZ30P060FTC) Cross Fader Service Assy Jumper wires styling Not inserted tightly Insert it after turning the connector Insert it after turning the connector 2.5 clockwise. 2.5 clockwise. Inserted tightly DJM-V10...
  • Page 97 • Bottom view LEDB Assy Remove the 5 screws and then remove the LEDB Assy. (BBZ30P060FTC) Screw tightening order Notes on assembling Attach LEDB Assy to a Panel stay while inserting FFC in the slit of the Panel stay. DJM-V10...
  • Page 98 (CN8401, 8402, 8406, 8412, 8414, 8415, 8419, 8420) Remove the UCOM Assy. CN8420 CN8420 CN8406 CN8406 CN8412 CN8412 CN8415 CN8415 CN8414 CN8414 CN8401 CN8401 CN8419 CN8419 CN8402 CN8402 • Bottom view FFC styling Bend Bend Hook Bend Bend Bend DJM-V10...
  • Page 99 Pass FFC to hook of Barrier Bend FFC to the edge of With hook as the fulcrum, Barrier. turn it to the direction of the arrow. [4-8] BFXB Assy Remove the 77 nuts and 77 washers. Remove the one nut. DJM-V10...
  • Page 100 Barrier. • Bottom view Barrier (DEC3929) Unhook the 2 hooks and then remove the Barrier. • Bottom view Barrier (DEC3861) Unhook the 2 hooks and then remove the Barrier. • Bottom view Barrier (DEC3860) DJM-V10...
  • Page 101 Put Barrier to the hook. Bend Barrier (2nd) Put Barrier to the hook. With hook as the fulcrum, turn it to Pass FFC in slit of Barrier. the direction of the arrow. DEC3861 DEC3861 DEC3861 DEC3861 DEC3929 DEC3929 DEC3929 DEC3929 DJM-V10...
  • Page 102 • Bottom view Screw tightening order Barrier and FFC styling Pass FFC in slit of Barrier. Put Barrier to the hook. Pass FFC in slit Pass FFC in slit Bend FFC in conformity to the line on the silk. DJM-V10...
  • Page 103 [4-11] PNLR and PNLL Assys Remove the 4 screws and then remove the PNLR Assy PNLL Assy PNLR Ass. (BBZ30P060FTC) Remove the 3 screws and then remove the PNLL Assy. (BBZ30P060FTC) Screw tightening order Stay Stay Stay Stay • Bottom view DJM-V10...
  • Page 104 (BPZ30P100FTB) CN8901 CN8901 Remove the Stay. Remove the TFT LCD. Remove the Touch panel. Stay Screw tightening order Cushion TFT LCD Cushion Cushion Cushion Touch panel Panel Cushion • Bottom view Note Nonreusable to fix it with DS tape. DJM-V10...
  • Page 105 When replacing the parts inside the LCD Section (especially TFT LCD and Touch panel), pay attention to dust intrusion between TFT LCD and Touch panel, and contamination of the TFT LCD surface. Check LCD Section for dust and dirt after assembling LCD Section. If it is dirty, clean it before installing it. DJM-V10...

  • Page 106: Each Setting And Adjustment

    " Factory reset (Be changed user setting to condition before the repair when be possible) " Crossfader calibration (6.2 CROSSFADER CALIBRATION) " Touch panel " Confirmation of the Touch panel operation (6.1 TEST MODE_Mode 10: Touch panel checking & calibration mode) DJM-V10...

  • Page 107: Updating Of The Firmware

    4 After "COMPLETE" is indicated, turn the unit OFF then unplug the USB memory device used for updating. Updating is completed. If updating does not start, restart from downloading of an updater. If updating cannot be started even after the above retry, the USB memory device may be faulty. Retry updating, using another USB memory device. DJM-V10...

  • Page 108: Writing The Serial Number Of The Unit

    6 Dialog is displayed for the input of Destination Code, you need to enter in accordance with following table. Model Name Input Destination Code LANGUAGE DJM-V10/LSYXJ DJM-V10/L ENGLISH SEND button DJM-V10/UXJCB DJM-V10/U ENGLISH...

  • Page 109: User Setable Items

    5 In [MY SETTINGS], load the settings from the storage device used in step 1. 6 Reset [UTILITY] settings to the values recorded in step 4. 7 Save these settings as [OWNER SETTING]. 8 Reset [UTILITY] settings to the values recorded in step 2. DJM-V10...
  • Page 110 MONO STEREO BOOTH OUT MIC OUT TO MASTER ATT. MONO/STEREO PEAK LIMITER THRESHOLD LEVEL 12dB MONO STEREO 12dB 15dB MIC OUT TO BOOTH LEVEL PEAK LIMITER THRESHOLD LEVEL 18dB 15dB 12dB 12dB 15dB PC UTILITY AUTO STANDBY LOCK LOCKED UNLOCKED DJM-V10...

  • Page 111: Exploded Views And Parts List

    For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 9.1 PACKING SECTION LSYXJ only UXJCB only XJCN XJCN only only XJCN only DJM-V10...
  • Page 112 See Contrast table (2) 9 Mirror Mat (1200*1000) DHL1169 NSP 10 Warranty See Contrast table (2) (2) CONTRAST TABLE DJM-V10/LSYXJ, UXJCB and XJCN are constructed the same except for the following: Mark Symbol and Description DJM-V10/LSYXJ DJM-V10/UXJCB DJM-V10/XJCN Power Cord...

  • Page 113: Exterior Section

    9.2 EXTERIOR SECTION UXJCB only Refer to "9.5 CONTROL PANEL SECTION (1/3)". UCOM UCOM UCOM UCOM CN8416 CN8416 CN8413 CN8413 UXJCB only Refer to "9.3 CHASSIS SECTION (1/2)". UXJCB only DJM-V10...
  • Page 114 27 Knob DAC3238 28 Stopper DNK6440 29 Knob DAA1415 30 Knob DAA1416 (2) CONTRAST TABLE DJM-V10/LSYXJ, UXJCB and XJCN are constructed the same except for the following: Mark Symbol and Description DJM-V10/LSYXJ DJM-V10/UXJCB DJM-V10/XJCN Label Not used DRW1975 Not used...

  • Page 115: Chassis Section (1/2)

    9.3 CHASSIS SECTION (1/2) Accessories of VR or or or or or or or or Accessories of PHONE JACK 12 set Refer to "9.4 CHASSIS SECTION (2/2)". DJM-V10...
  • Page 116 39 EMC Gasket DEC3638 40 Cord Clamper (Steel) RNH-184 41 • • • • • 42 • • • • • 43 Nut (M12) NKX2FNI 44 Nut M12 DBN1018 45 Washer DEC2920 46 Screw BBZ30P060FTC 47 Screw BPZ30P080FTB 48 Screw PPZ30P080FTB DJM-V10...

  • Page 117: Chassis Section (2/2)

    9.4 CHASSIS SECTION (2/2) Note AEB7092 is nonreusable to fix it with DS tape. DJM-V10...
  • Page 118 36 Cable Tie ZCA-SKB90BK 37 • • • • • 38 • • • • • 39 Nut (M12) NKX2FNI 40 Washer DEC2920 41 Flange Nut M9 DBN1008 42 Screw ABZ30P060FTC 43 Screw BBZ30P060FTB 44 Screw BBZ30P060FTC 45 Screw BBZ30P080FTB DJM-V10...

  • Page 119: Control Panel Section (1/3)

    Lubricating oil or or or or or or (GEM1107) or or or or " Channel Fader Section ". Accessories of VR 42 43 UCOM UCOM CN8410 CN8410 Refer to Accessories "9.6 CONTROL PANEL of VR SECTION (2/3)". DJM-V10...
  • Page 120 31 CHF6 Assy DWX4363 32 Guide Shaft VK1 DLA1978 33 Lever Plate DNH2954 34 Cover DNG1131 35 Slider DNK6889 36 Holder DNK6884 37 Cushion DEC3640 38 Screw BPZ20P060FTC 39 Screw BSZ20P040FTB 40 Screw CPZ26P080FTC 41 • • • • • DJM-V10...

  • Page 121: F 9.6 Control Panel Section (2/3)

    9.6 CONTROL PANEL SECTION (2/3) • Bottom view Refer to "9.7 CONTROL PANEL SECTION (3/3)". DJM-V10...
  • Page 122 16 Plate DNG1137 17 Barrier DEC3860 18 Barrier DEC3861 19 Barrier DEC3862 20 Barrier DEC3890 21 Barrier DEC3929 22 Cap DAC3136 23 Holder DNK6930 24 Holder DNK6511 25 Holder DNK6879 26 Spacer DEC3880 27 Screw BBZ30P060FTC 28 Screw BPZ30P100FTB DJM-V10...

  • Page 123: Control Panel Section (3/3)

    9 1/2 14 1/3 11 2/3 9 2/2 14 2/3 10 3/3 9 1/2 10 1/3 14 3/3 9 2/2 11 1/3 17 1/2 9 1/2 9 2/2 • Top view 9 1/2 9 1/2 17 2/2 9 2/2 DJM-V10...
  • Page 124 11 Button DAC3493 12 Button DAC3494 31 Cushion DEC3926 13 Button DAC3495 32 Cushion DEC3934 14 Button DAC3496 33 Screw BPZ30P100FTB 15 Button DAC3497 16 Button DAC3498 17 Button DAC3499 18 Button DAC3500 19 Button DAC3501 20 FFC DDD1964 DJM-V10...

Table of Contents

Save PDF