To reduce the environmental impact of our products, ATEN documentation and software can be found online at : http://www.aten.com/download/ Technical Support www.aten.com/support...
VK401 Front View VK401 Rear View contact pins screw holes detecting area Installation Note: Make sure that you power off the VK430 RBS Panel and disconnect the VK430 from the power source before installing the VK401 Access Inspector onto the VK430.
Page 4
LAN port with PoE power jack To mount the VK401 Access Inspector onto the VK430 RBS Panel: Attach the VK401 Access Inspector to the VK430 RBS Panel with the VK401’s contact pins facing the contact pins of VK430 RBS Panel.
Page 5
Fasten the VK401 to the VK430 using the 2 supplied screws. Connect the VK430 RBS Panel to the power source and then switch its power switch to turn it on. Refer to the user manual and QSG of VK430 RBS Panel for the details.
Need help?
Do you have a question about the VK401 and is the answer not in the manual?
Questions and answers