Related Manuals for Joy-it rb-camera-WW2
Summary of Contents for Joy-it rb-camera-WW2
- Page 1 5 MP CAMERA FOR RASPBERRY PI rb-camera-WW2 Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net...
-
Page 2: General Information
1. GENERAL INFORMATION Dear Customer, thank you for choosing our product. In the following, we will show you what to pay attention to during commissioning and use. Should you encounter any unexpected problems during use, please feel free to contact us. During use, particular attention must be paid to the right of privacy and the right to informational self-determination that apply in Ger- many. - Page 3 If you want to use the camera module on a Raspberry Pi 5, you must push the clip holding the ribbon cable to the end in the direction of the arrows to remove the ribbon cable already connected to the camera module as shown in the picture below.
- Page 4 It is also possible to capture several images one after the other. For this you have to set 2 following parameters for the following command. "-o xxxxxx" which defines the time how long the command should run. "--timelapse xxxxxx" which defines the time between each photo. libcamera-still -t 6000 --datetime -n --timelapse 1000 The images are then also saved in the user directory (/home/pi) under the name *datetime*.jpg where *datetime* corresponds to the current date...
-
Page 5: Additional Information
Germany Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy-it.net or by telephone. Information on packaging: If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
Need help?
Do you have a question about the rb-camera-WW2 and is the answer not in the manual?
Questions and answers