Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bravo BV241RG
Summary of Contents for Bravo BV241RG
- Page 1 Installation Instructions 24” 30" and 36” Gas Free-Standing Range Model : BV241RG BV301RG BV361RG IMPORTANT SAFETY INSTRUCTIONS Carefully read the important information regarding installation, safety and maintenance. Keep these instructions for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS RANGE SAFETY ....................2 INSTALLATION REQUIREMENTS ................. 6 Tools and Parts ....................... 6 Location Requirements ....................8 Electrical Requirements ....................11 Gas Supply Requirements ...................13 INSTALLATION INSTRUCTIONS ................ 16 Step 1 - Unpack Range ....................16 Step 2 - Install Anti-Tip Bracket ..................16 Step 3 - Make Gas Connection ..................20 Step 4 - Make Electrical Connection ................22 Step 5 - Install Range ....................22... -
Page 4: Range Safety
RANGE SAFETY WARNING A child or adult can tip the range and be killed. Install the anti-tip device to the structure and / or the range. Verify the anti-tip device has been properly installed and engaged [state how for the two or more possible loctions]. - Page 5 Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
- Page 6 WARNING Fire Hazard If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. - Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance. - WHAT TO DO IF YOU SMELL GAS •...
- Page 7 In the State of Massachusetts, the following installation instructions apply: • Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. • If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 •...
-
Page 8: Installation Requirements
INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. TOOLS NEEDED • • Tape measure • • Flat-blade screwdriver ¼" nut driver • • Phillips screwdriver •... - Page 9 The Anti-tip bracket must be securely mounted to the floor and wall. Depending on the thickness and type of flooring you have, 2 additional screws will be needed (not supplied) to anchor the anti-tip bracket to the floor. Additional screws are available at your local Hardware Store. 2 screws to secure anti-tip bracket to the floor...
-
Page 10: Location Requirements
LOCATION REQUIREMENTS VENTILATION IMPORTANT: combustion and ventilation air. • It is the installer’s responsibility to comply with the installation clearances specified on Page 9 and 10 of this Manual. The model/serial rating plate is located on the left-hand side of the oven frame. Open oven door to view label. See label on back panel of range for additional element and oven power ratings. - Page 11 DIMENSIONS Warning: Cabinets 13 in. deep and not less than the nominal width of the appliance must be installed at least 30 in. above the cooking surface. Cabinets maximum 13 in. deep may be installed on both sides of the appliance with the bottom of the cabinets at least 18 in.
- Page 12 Back of Range Gas Line from Range Power Cord Power Supply IMPORTANT: An electric outlet on the wall or in the floor may be either recessed or surface mounted. 3" (7.6 cm) 24" Model - 24" (61cm) 30" Model - 30" (76cm) 17½"...
-
Page 13: Electrical Requirements
ELECTRICAL REQUIREMENTS WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. IMPORTANT: The range must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70. - Page 14 A copy of the above code standards can be obtained from: National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471 CSA International 8501 East Pleasant Valley Road Cleveland, OH 44131-5575 • A 120 volt, 60 Hz., AC only, 15-amp fused, electrical circuit is required. A time- delay fuse or circuit breaker is also recommended.
-
Page 15: Gas Supply Requirements
GAS SUPPLY REQUIREMENTS WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. does not exceed 14" (36 cm) water column. licensed heating personnel, authorized gas company personnel, and authorized service personnel. - Page 16 LP gas conversion: IMPORTANT: gas supplier. See “Gas Conversions” section. GAS SUPPLY LINE Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size resist the action of LP gas must not be used. With LP gas, piping or tubing size can be ½"...
- Page 17 Rigid pipe connection: connection to the range. The rigid pipe must be level with the range connection. All strains must be removed from the supply and fuel lines so range will be level and in line. GAS PRESSURE REGULATOR The gas pressure regulator supplied with this range must be used. The inlet pressure to the regulator should be as follows for proper operation: Natural gas: Minimum pressure: 5"...
-
Page 18: Installation Instructions
INSTALLATION INSTRUCTIONS IMPORTANT: This appliance shall be installed only by authorized persons and regulations, municipal building codes, electrical wiring Regulations. WARNING Excessive Weight Hazard Use two or more people when unpacking and/or moving range for installation Failure to do so can result in back or other injury. STEP 1 - UNPACK RANGE 1. - Page 19 INSTALL ANTI-TIP BRACKET WARNING Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details. Failure to follow these instructions can result in death or serious burns to children and adults.
- Page 20 3. Using the anti-tip bracket as a template, mark the two holes for either the wood or concrete floor and then the wall, as shown. Distance from Adjacent Cabinet (³⁄₈" to ¹⁄₂" [0.95 to 1.27 cm]) Wall Holes Concrete Floor Holes Wood Floor Holes Rear Range Foot construction.
- Page 21 Install Range IMPORTANT: Do not operate the range if its rear foot is not completely engaged in the anti-tip bracket. Never completely remove the leveling legs or the range will not be secured to the anti-tip device properly. 1. Slide range into its location, making sure a rear leveling leg slides into the anti-tip bracket.
-
Page 22: Step 3 - Make Gas Connection
STEP 3 - MAKE GAS CONNECTION WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. does not exceed 14" (36 cm) water column. licensed heating personnel, authorized gas company personnel, and authorized service personnel. - Page 23 CONNECT GAS LINE FROM GAS PRESSURE REGULATOR TO GAS SUPPLY: 1. Apply pipe-joint compound made for use with LP gas to the tapered (NPT) threads of both adapters supplied with gas line kit. 2. Attach one adapter to the gas pressure regulator and the other to the gas shutoff valve and tighten both.
-
Page 24: Step 4 - Make Electrical Connection
STEP 4 - MAKE ELECTRICAL CONNECTION WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. 2. Plug into a grounded 3 prong outlet. STEP 5 - INSTALL RANGE IMPORTANT: If the range is moved to adjust the leveling legs, make sure when you repeating steps 1 through 8. -
Page 25: Step 6 - Level The Range (If Needed)
3. Slowly attempt to tilt the range forward. If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket. Go to Step 8. 4. If the rear of the range lifts more than foot is not engaged in the anti-tip bracket. IMPORTANT: If there is a snapping or popping sound when lifting the range, the range may not be fully engaged in the bracket. -
Page 26: Step 7 - Check Operation Of Electronic Ignition System
STEP 7 - CHECK OPERATION OF ELECTRONIC IGNITION SYSTEM The cooktop and oven burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “ICON” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “ICON.”... -
Page 27: Gas Conversion
If the low flame needs to be adjusted: Adjustment Screw Control Knob Stem 1. Light one burner and turn the control knob to the lowest setting. 2. Remove the control knob. 3. Insert a small, flat-blade screwdriver into the adjustment screw, and slowly turn the screw until the flame appearance is correct. -
Page 28: Convert Gas Pressure Regulator
WARNING TIP OVER HAZARD • A child or adult can tip the range and be killed. • Install anti-tip bracket to floor or wall per installation instructions. • Slide range back so rear range foot is engaged in the slot of the anti-tip bracket. - Page 29 4. Unscrew the metal cover in the center of the gas pressure regulator with a wrench. Gas pressure regulator Metal cover 5. Remove the regulator cap from the metal cover. Regulator Regulator Metal Metal cover cover From NG natural gas position From LP propane gas positi on 6.
- Page 30 7. Screw and tighten the metal cover back into the gas pressure regulator with a wrench. Gas pressure regulator Metal cover...
-
Page 31: Convert Surface Burners
CONVERT SURFACE BURNERS IMPORTANT: Make sure to save the orifices that have just been replaced in the conversion. NG/LP Orifice Chart for Surface and Oven Burners: 24" Burner and Orifice Characteristic Table Manifold Orifice Rate Pressure Burner Diam. (mm) Type [i.w.c.] [BTU/h] 4"... - Page 32 30" Burner and Orifice Characteristic Table (M-A) Manifold Orifice Rate Pressure Burner Diam. (mm) Type [i.w.c.] [BTU/h] 4" 18000 Triplering 1.22 LP (Propane) 10" 17000 1.45 4" 8800 Rapid 0.91 LP (Propane) 10" 8800 1.29 4" 6900 Semi-Rapid LP (Propane) 10"...
- Page 33 36" Burner and Orifice Characteristic Table (M-A) Manifold Orifice Rate Pressure Burner Diam. (mm) Type [i.w.c.] [BTU/h] 4" 18000 Triplering 1.22 LP (Propane) 10" 17000 1.45 4" 8800 Rapid 0.91 LP (Propane) 10" 8800 1.29 4" 6900 Semi-Rapid LP (Propane) 10"...
- Page 34 1. If installed, remove the burner grates, burner caps, and the burner bases. 2. Remove the existing orifices with a 7 mm nut driver. Orifice 3. Replace the orifices with the correct fuel type orifices. Gas orifices are stamped with a size number. Refer to the orifice chart earlier for correct Natural gas and LP gas orifice sizes and proper placement.
-
Page 35: Convert Oven Burners
5. Replace the burner base, burner caps, and burner grates. Burner cap Burner base Igniter Flame failure safety device (for older versions) Orifice holder CONVERT OVEN BURNERS This product cannot be converted to Natural gas or LP gas by adjusting or tightening the oven orifices. - Page 36 Converting Bake Burner 1. Remove Bake Burner Cover Open your oven door and unscrew the back two screws of bake burner cover. Remove the bake burner cover. 2. Remove Flame Spread Plate Unscrew the four screws of the flame spread plate. Remove the flame spread plate.
-
Page 37: Complete Gas Conversion
COMPLETE GAS CONVERSION 1. Open shutoff valve in the gas supply line. 2. Plug in cooktop or reconnect power. • Refer to "Gas Connection" section in the "Installation Instructions" section for proper connection of the range to the gas supply. •... -
Page 38: Limited Warranty
LIMITED WARRANTY LIMITED WARRANTY BRAVOKITCHEN LLC. warrants to the original consumer or purchaser this BRAVOKITCHEN appliance is free from defects in material or workmanship for a period of One (1) year from the date of purchase. If any such defect is discovered within the warranty period, BRAVOKITCHEN LLC., at its discretion, will repair or replace the Product as follows: During the first 30 days Bravokitchen LLC will provide all parts and labor or replace the product at our choice.
Need help?
Do you have a question about the BV241RG and is the answer not in the manual?
Questions and answers