Advertisement
Quick Links
HERB
SHALLOW
COMPOSITE RAISED GARDEN BED
INSTALLATION GUIDELINE
ASSEMBLE PANELS
1.
Slide one end of the T&G Board (A) into the open end
of the Garden Hinge (B)
2.
Insert one Garden Cap (C) on both side to lock in
place
3.
Repeat on opposite side of T&G Board (A), ensure to
flip over Garden Hinge (B)
4.
Repeat for all T&G Boards
For more information, please visit http://www.naturescomposites.com
COMPONENTS
RAISED HERB GARDEN BED
A. T&G Board (Qty 2 @ 22.25" and Qty 2 @ 44.5")
B. Garden Hinge (Qty 8)
C. Garden Cap (Qty 20)
D. Garden Stake (Qty 4)
RAISED SHALLOW GARDEN BED
A. T&G Board (Qty 4 @ 22.25" and Qty 4 @ 44.5")
B. Garden Hinge (Qty 16)
C. Garden Cap (Qty 40)
D. Garden Stake (Qty 8)
MEDIUM
RAISED MEDIUM GARDEN BED
A. T&G Board (Qty 6 @ 22.25" and Qty 6 @ 44.5")
B. Garden Hinge (Qty 24)
C. Garden Cap (Qty 60)
D. Garden Stake (Qty 12)
ASSEMBLE RAISED HERB GARDEN BED
5.
6.
7.
Once the panels are assembled, layout the herb
garden bed in the desired location in a straight square
(2x2) or Rectangle (4x2)
Lock panels in place by sliding the Garden Stake (D)
into the Hinge securing into the ground
For Herb Bed Only: Install the remaining Garden Caps
to the top of the Stake aligning the cap to lock in place
Advertisement
Summary of Contents for Natures Composites HERB
- Page 1 Repeat on opposite side of T&G Board (A), ensure to into the Hinge securing into the ground flip over Garden Hinge (B) For Herb Bed Only: Install the remaining Garden Caps Repeat for all T&G Boards to the top of the Stake aligning the cap to lock in place...
- Page 2 Stack the next level of panels, connecting the tongue and groove. and groove. 13. Drop the stake into the hole of the herb level stakes 10. Drop the stake into the hole of the shallow level stakes 14. For Shallow Garden Beds Only: Install the remaining 11.
Need help?
Do you have a question about the HERB and is the answer not in the manual?
Questions and answers