Hitachi TRK-W360 Service Manual

1.
2.
SAFETY PRECAUTIONS
SPECIFICATONS sccsesceecsseesessecseneceessesecnanseeaten ees
DISASSEMBLY INSTRUCTIONS -:---
DIAL POINTER SETTING c-ceessesseeeseeeeere
CIRCUIT ADJUSTMENT sessesssessessetseesecseeneteare sees
ADJUSTMENT POINT Prrerrrerrrrrrrir iter tet ro
TUNER ALIGNMENT SET UP
TUNER ALIGNMENT <cessseeceeeeeesee eset
a aeecccecceceees
POTTTTTTT TIT)
EXPLODED VIEW"
(MECHANISM ASSEMBLY) Perereeetrrt tier rrery 26
(UNIT ASSEMBLY). s++ssssossssseserestosssseseesnecnntegsenn 2)
REPLACEMENT PARTS LIST vs+ssssseeseeeeesressettecees 23
SPECIFICATIONS
@ GENERAL SPECIFICATIONS | Tuning Rangé : FM: 87.5 to 108 Miz [for E, E(BS)]
Power Supply
; AC: 220V,50Hz{forE]
F
3. FM: 88 to 108 MHz [except E, E(BS)]
: AC: 240V, 50Hz [for E(BS)} SW: 6,0 to 18,0 MHz [for E, E(BS)]
: AC: 110-127V, 200-220V; 230-250V,
: MW: 530 to 1605.KHz [except H, HC]
60/60Hz [for W, W(UN), WIAU)]}
: AM: 530 to 1705 KHz [for H, HC]
: AC; 120V, 60Hz [for H, HC] : LW: 150 to 285 KHz [for E, E(BS)]
: DC: SV ("D" cell or IEC R20 or SUM-1 X6 : SW2: 7.0 to 22.0 MHz
or equivalent) (option) ? SW1; 2.3to 7.0 MHz
Power (mains) Consumption
: 8W
Antennas (Aenal)
+: SW2/FM/SW:
Telescopic antenna (aerial)
Speakers
: 100m, 4 ohmsX2
'
:
: SW1/MW/AM/LW: Bullt-in ferrite core
Output power
: 20W P.M.P. (AC operation)
antenna (aerial)
1.8W/CH (10% T.H.D.) (DC operation) +a :
Dimensions : 515(W)X163(H)X130(D) mm : "@ TAPE RECORDER SECTION
Weight -
« 8.4kg (with batteries)"
'Recording System™
: AC las (TAPE 2)
Erasing System... Magnet (TAPE 2)
© RADIO SECTION
Pisiyback Frequency Response 7 NORMAL: 70 to 10,000 Hz
Circuit System
: FM/SW/MWILW 4-band superhelerodyne
= . "Output Load |Impendance
: Headphones: 8 to 100 ohms
{for E, E(BS)]
> FM/SW2/SW1/MW 4-band -
* Specifications are subject to change without natice for performance
superheterodyhe [for W, W(UN), W(AU)] improvement.
: FM/AM 2-band superheterodyne
[for H, HC]