on2 PETS D668,006 Manual

STEP 4
4.1 4.2
Place Top Trunk ( B3) Place Small Perch (C3)
on top of Medium Perch (C2). over Top Trunk (B3).
Make sure the small wood Rotate Small Perch (C3)
fastener (C4) fits inside trunk.
clockwise until tight.
NOTE: If Small Rod (A3) does not reach the Top Small Perch (C3), unscrew Small Rod (A3)
until it screws into Top Perch (C3).
B3
C2
STEP 5
Please note that Branches (E1) have been pre-assembled for your convenience.
5.1 5.2
Insert each Cap (D1) into Push Branch (E1) into
the slots from underneath Cap (D1). Press down
on all three perches with firmly to secure branch
open end facing up.
D1
Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED: Product not intended for the use of children. Be aware some components may be
swallowed. If such event occurs, stop use of the product immediately and check our return and warranty policies.
This product is protected by the following USPTO codes: D668,006 / D700,754 / 8,695,533B1 / D688,002
4.3
Rearrange perches
so your cat is able
to climb easily.
C3
B3
Change branch colors easily
and customize to your liking.
NOTE: Additional leaf sets
.
are sold separately and come
with their own cap system.
E1
D1
5 FT. INTERCHANGEABLE
LEAF BRANCHES CAT TREE
For inquiries or assistance, please contact us at Support@On2Pets.com.
ROUND BASE
MADE IN THE USA
SQUARE BASE
On2Pets
@