Page 1
Installation Guide Mineral Guard Replacement Cartridge with Nature ² Technology ® † Nature technology consists of the minerals silver and copper. † WARNING FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment in accordance with the latest applicable version of AS3633, along with any other applicable local or council codes/ standards.
Page 2
Failure to heed the following can result in permanent injury or drowning. Always turn pump off prior to installing or changing Mineral Guard cartridge. Your pump/filter system is operated under pressure and the pressure must be released before you begin work.
Page 3
® Section 2. Installation and Use Install the Cartridge Install the cartridge into the Mineral Guard vessel. NOTE: The unit can only be installed in one direction. IMPORTANT Initial superoxidation with chlorine is required to burn off contaminants and activate cartridge.
Need help?
Do you have a question about the MINERAL GUARD and is the answer not in the manual?
Questions and answers