Do you have a question about the Hikaru F-C-002-US-WH and is the answer not in the manual?
Questions and answers
Summary of Contents for HIROIA Hikaru F-C-002-US-WH
Page 1
Hikaru Digital Version US V02 V60 Smart Brewer F-C-���-US-WH User Manual Please read this user manual carefully and keep it safely for future reference.
IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. Please use and operate the machine at the designated voltage. Do not use it if it exceeds the safety limit. 3.
Page 4
Hiroia is not responsible for any damage to the co ee machine components resulting from improper use or failure to follow the instructions.
Product Overview Accessories Product Water tank lid Water tank Filter paper LED indicator light Control buttons Dispensing spout V60 dripper Atmosphere light V60 dripper adapter Power button Anti-slip pad V60 range server Technical Specifications Power Water tank material 120V Tritan™,BPA Free , Heat Resistance 100°C Wattage 830W...
Operation Interface Instructions Icon Light Indicator of Recipe Button Drain mode Small cup recipe Bluetooth Recipe button Medium cup recipe Water level indicator Large cup recipe Cleaning indicator P recipe Start / Stop button ( Peronal recipe ) If the P recipe is not set, lights will not be displayed.
Preset Recipes Recipe Weight Default Roast Temperature Brew Volume ��℃ / ���.�℉ Light Roast ��℃ / ���.�℉ Light Roast ��℃ / ���.�℉ Light Roast *Depending on the characteristics and roast level of the co ee beans, the volume of co ee extracted may vary. *The co ee beans are recommended to be ground to a coarseness of 500 to 600 microns.
Quick Start Guide Before starting the co ee machine, please fill water tank with water up to the MAX mark. Position the prepared filter set beneath the dispensing spout. Press the "Recipe Button" to choose your desired recipe. Once you have selected the desired recipe, press the "Start Button" to begin the brewing process.
Drain Mode Do not lift and tilt the co ee machine to pour water. Please follow below steps to operate draining: If you need to empty the remaining water in the water tank, you can follow the steps below. Place a container with a capacity greater than 1...
Cleaning Please unplug before cleaning. Please do not immerse or rinse this product under water. Use only a clean, soft cloth to wipe away any dust or dirt from the exterior. Avoid using hard materials like scouring pads or steel brushes to clean. If dirt is tough to remove, use a neutral cleaner and wipe carefully to prevent residue.
Page 11
The cleaning indicator / recipe indicator S/M is flashig simultaneously. � Add 600ml of water to the water tank until the water level indicator turns o . Place an empty container with a capacity of at least 700ml under the dispensing spout.
Machine calibration Machine calibration is recommended when: To ensure the accuracy of the built-in electronic scale and the correct weight of the water dispensed, please perform weight calibration under the following circumstances: 1. The co ee machine has been moved or transported. 2.
Page 13
Place a 500g weight or refer to the "inside" � green water level mark on the water tank for 500ml water. Slowly pour in 500ml of water, then press the "Start Button". Wait for the co ee machine's beep to stop, �...
Page 14
Short-press the "Recipe Button". The Bluetooth 5 indicator and Water Level indicator will flash, along with the S/M/L/P. Short press the "Start Button" , the indicator lights 6 will change to (Bluetooth indicator/Water level indicator + S/M/L/P steady or all o ). Wait until the lights become Bluetooth/Water 7...
flashing + Bluetooth indicator is steady + Cleaning indicator is steady. Weight abnormal 3, Please contact the dealer water tank weight or Hiroia support team, detection abnormal. support@hiroia.com � 4 recipe (S/M/L/P) lights are flashing + Bluetooth indicator is steady.
Page 16
Restore Default Machine Name and Recipe The co ee machine will clear all Bluetooth and reset to the factory settings. Note that this action cannot be undone. Unplug the power cord after turning o the machine. Press and hold the "Power Button" while plugging the power cord into the outlet. Release the "Power Button"...
3F., No. 42, Sec. 2, Zhongshan N. Rd., Zhongshan Dist., Taipei City, 104, Taiwan +886-2-27927659 Do not disassemble or tamper with the machine by yourself, Hiroia will not accept the warranty due to human factors. To provide better service, Hiroia will retain customers information.Hiroia will never provide customers information to third parties except under the following circum- stances.
Page 18
Due to malfunctions or other conditions, HIROIA may use alternative products instead of maintenance. Maintenance may use recycled new parts or replacement parts. Replaced parts will be retrieved by HIROIA. The warranty period counts from the initial purchase date even the product is replaced by this warranty free of charge.
Need help?
Do you have a question about the Hikaru F-C-002-US-WH and is the answer not in the manual?
Questions and answers