Subscribe to Our Youtube Channel
Summary of Contents for Phillips Connect Smart7 Pro
- Page 1 User Manual Smart7 Pro™ Part #77-6800 CAN Part #77-6801-A A2NA Part #77-6801-A A2SA Part #77-6811 CAN WP 0HA Part #77-6811 CAN NP 0HA Smart7 Pro User Manual Rev A...
-
Page 2: Table Of Contents
Federal Communication Commission Interference Statement ..............7 IMPORTANT NOTE: FCC Radiation Exposure Statement ..............7 Industry Canada Statement .......................... 8 Radiation Exposure Statement: ......................8 Company Information ........................... 9 © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 1 of 9... -
Page 3: Introduction
The Smart7 Pro Gateway appears to the user of a server application as a single endpoint device. It can be queried, updated, and configured either through a serial connection or an over-the air (OTA) LTE IP connection. -
Page 4: Hardware Features
ARDWARE EATURES The Smart7 Pro Gateway ships from the factory pre-configured for a specific set of functions and can be configured and commissioned in the field, while providing support for external control through a Phillips Connect proprietary set of commands. Supported features include the following:... - Page 5 Dimensions: 13.6” (L) x 7.0” (W) x 4.1” (H) (345 mm x 178 mm x 104 mm) Weight: 5.31 lbs. (2.40 kg) Mounting: 6 x 5/16" bolts CERTIFICATIONS FCC / IC PTCRB Cellular © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 4 of 9...
- Page 6 *Compatible with most ABS manufacturers PreCheck™ Schedule-based or remote on-demand • Lamp circuit supply: 11.5 V / 1 A • External sensor supply: 12 V / 500 mA © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 5 of 9...
-
Page 7: Mechanical Details
– S ™ ANUAL MART 4. M ECHANICAL ETAILS Top/Side dimensions are provided in inches. 4.1 T IMENSIONS IMENSIONS © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 6 of 9... -
Page 8: Federal Communication Commission Interference Statement
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 7 of 9... -
Page 9: Industry Canada Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. © 2023 Phillips Connect LLC Smart7 Pro User Manual Page 8 of 9... -
Page 10: Company Information
© 2023 Phillips Connect Technologies LLC. All rights reserved. Phillips Connect Technologies LLC reserves the right to modify the units, specification, or this document without prior notice in the interest of improving performance, reliability, or servicing. Reasonable efforts have been made to assure the accuracy of this document;...
Need help?
Do you have a question about the Smart7 Pro and is the answer not in the manual?
Questions and answers