LED CANOPY INSTRUCTION MANUAL
LEDCNPY1000051141 - LG-PGC-SSQ-100-130-150W-3CCT
IMPORTANT: Read all instructions prior to installation!
Keep instructions for future reference!
IMPORTANT SAFETY & NOTES WARNING
Before installing, servicing, or performing routine maintenance upon this equipment,
follow these general precautions.
To reduce the risk of death, personal injury or property damage from fire, electric
shock, falling parts, cuts/abrasions, and other hazards read all warnings and
instructions included with and on the fixture box and all fixture labels.
Product should be installed by a certified electrician in accordance with applicable
national, state, and local building and electrical codes.
Failure to properly support the fixture may result in damage or injury, for which the
manufacturer does not assume responsibility.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal
or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during installation.
WARNING
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the
power supply!
Turn off the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label
information.
LumeGen | 1000 Westinghouse Drive STE 1, New Stanton PA 15672 | 800-998-6977 | Lightup.com |Page | 1
Specifications and dimensions subject to change without notice.
Project:
Date of Purchase
Included Parts List:
7 screws
8 Flatwasher
1 safety rope
5 Plastic expansion pipe
Need help?
Do you have a question about the LG-PGC-SSQ-100-3CCT and is the answer not in the manual?
Questions and answers