Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for PAX T3180
- Page 1 3 Inch Thermal Printer T3180 User Manual...
- Page 2 T3180 User Manual REVISION RECORDS REV. DATE DESCRIPTION Drawn Checked Approved 2022.11.12 1.First edition Will...
-
Page 3: Table Of Contents
T3180 User Manual Content Statement ....................................4 Important Safety Instructions .............................. 4 1 OVERVIEW ..................................6 1.1 Introductions ................................6 1.2 The Main Features ..............................6 2 GETTING STARTED ................................7 2.1 Packing List ................................7 2.2 Appearance and Components ............................ 8 Front .................................. -
Page 4: Statement
T3180 User Manual Statement Warnings This must be complied with in order to avoid any damage to the human body and to the equipment. This is showing the important information and tips for the printer operating. Note Due to continuous update of product, please take in kind of real machine, such as accessories, programs etc. - Page 5 T3180 User Manual damaged or frayed, replace it immediately. 10) To ensure the print quality and reliability, you are suggested to use the recommended paper or the same quality paper. 11) Please switch off the power supply when connect/disconnect all the ports or it will cause damage to the printer control circuit.
-
Page 6: Overview
1 OVERVIEW 1.1 Introductions T3180 is a thermal receipt printer, featured by high print quality, high print speed, high stability, etc. It can be used in commercial POS system, food industry and occasions which need real-time field print receipts. -
Page 7: Getting Started
T3180 User Manual 2 GETTING STARTED 2.1 Packing List After receiving your printer, please check for possible shipping damage: 1. Inspect the outside of both the box and the printer for possible damage. 2. Check whether you have received the following accessories together with the printer, if there are any items missing, please contact your local dealer. -
Page 8: Appearance And Components
T3180 User Manual 2.2 Appearance and Components Front Rear 1) The printer without Bluetooth interface:... -
Page 9: Inside
T3180 User Manual Inside... -
Page 10: Specification
T3180 User Manual 3 SPECIFICATION 3.1 Printer Specification Table3-1 General Specification (1/2) Item Parameter Printing Method Direct thermal line printing Resolution 203dpi，8dots/mm Printing Printing Width 72mm Parameter 260mm/s Print Speed Interface USB, Serial, Ethernet, Cash drawer, Bluetooth Adjustable from level 1 to level 4... - Page 11 T3180 User Manual Table3-1 General Specification(Continued) (2/2) Item Para UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128 Barcode PDF417, QR code, (DataMatrix, Maxicode and Aztec) for optional Support varied density bitmap as and download bitmap printing Graphics Max size of each bitmap is 40K, the total size of bitmap is 256k.
-
Page 12: Printing Media Specification
T3180 User Manual 3.2 Printing Media Specification 3.2.1 Continuous Thermal Paper Specification Paper Type : Specified Thermal Paper 0 0 Paper Width 1 1 Paper Outer Diameter : Max. 83 mm : 0.056 ～ 0.13m Paper Thickness Paper Type Manufacturer FD210,PD150R,PD160R OJI Paper CO.,LTD. -
Page 13: Printing And Cutting Position
T3180 User Manual 3.3 Printing and Cutting Position 3.3.1 Printing position 0 0 mm Print Paper mm Print Paper 3.3.2 Cutting Position Type Paper Cutting Position(L1) T3180 11.6mm... -
Page 14: Installation And Usage
T3180 User Manual 4 INSTALLATION AND USAGE 4.1 Media Loading 4.1.1 Paper Confirmation 1) When using 80mm(width) roll paper, take down the paper guide of both sides. 2) When using 58mm(width) roll paper, insert the paper guide to each side. -
Page 15: Power Connection
T3180 User Manual than 80° C, printer will stop working until the temperature is less than 60° C. 4.3 Power Connection 1) Put the cable plug of power adapter facing up at flat side, insert the rear of the printer power connector;... -
Page 16: Interface Cable Connection
T3180 User Manual When pull out the adapter, please pinch the shell of power adapter and pull the switch up, when the switch is fully opened then pull out the power adapter. Don’t put forth your strength to pull the plug by squeeze at any of place of power adapter. Because, it is more difficult to pull it out and easy to damage the cable. -
Page 17: Print Test
2. Please set the “Interface” as the type you use. 3. Use the Windows Driver Program to print out the “Print Test Page”. 5 INTERFACES T3180 supports cash drawer interface and many other various communicate interfaces, such as Serial interface, USB interface, Ethernet interface. 5.1 USB... -
Page 18: Serial Interface
T3180 User Manual 5.2 Serial Interface Figure 5-2 SIGNAL NAME 5.3 Ethernet Interface PIN NO. Signal Name NOTE: Ethernet interface can only be connected to a has been isolated SELV such interface of end... -
Page 19: Cash Drawer Interface
T3180 User Manual device. 5.4 Cash Drawer Interface Figure 5-4 PIN NO. Signal Name Drawer 1 DRSW Drawer 2 Electrical characteristics Driving voltage：DC 24 V Driving current：Maximum 0.8 A ( In 510 ms) Drawer check signal：“L” = 0～0.5 V... -
Page 20: Power Supply Interface
Signal Name +24V SHELL Printer end-Unetop DC-002 or similar products, user end-Unetop DC-002 or similar products. 5.6 Bluetooth Interface/Wi-Fi 1) Bluetooth Settings Default name: BT Printer Default password: 0000 or 1234 Refer to PAX POS Printer Bluetooth Manual.pdf for more details. - Page 21 T3180 User Manual 2) Wi-Fi Settings ● Connection method: In AP mode, the factory default IP address is 192.168.1.1 Open the browser to enter the default IP: 192.168.1.1 into the settings interface, the web interface login password is 12345678. Refer to WIFI Operation Manual.pdf for more details.
-
Page 22: Troubleshooting
T3180 User Manual 6 TROUBLESHOOTING Your printer is very reliable, but occasionally problems may occur. This chapter provides information on some common problems you may encounter and how to solve them. If you encounter problems that you can not resolve, contact your dealer for assistance. -
Page 23: Troubles Occur During Printing
T3180 User Manual 6.3 Troubles Occur During Printing Problem Description Probable Reason Solution Coloured stripe in the Paper near end Reinstall the roll paper paper Incorrect roll paper installation Check if the roll paper is installed recommended thermal roll Unqualified roll paper... -
Page 24: Problems Emerge During The Paper Cutting
T3180 User Manual 6.4 Problems Emerge During the Paper Cutting Problem Probable Reason Resolution Description Cutter abrasion, Replace the cutter insufficient cutting Worm gear and worm Cutter jam, the Replace the worm gear and worm wheel wheel abrasion movable cutter... -
Page 25: Printer Cleaning And Maintenance
T3180 User Manual 7 PRINTER CLEANING AND MAINTENANCE Print quality might be degraded by dust, foreign substance, adhesive substance, or other pollution materials stuck in the printer head or inside the printer. When dirty, clean the print head as follows: ※... - Page 26 T3180 User Manual RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
- Page 27 T3180 User Manual IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the T3180 and is the answer not in the manual?
Questions and answers