INTRODUCTION This product is an all-in-one meeting videobar with ultra-wide angle 4K camera, microphone and speaker. It is ideal for applications in huddle rooms, small meeting rooms, private offices and home offices. FEATURES • Wide angle 4K video camera with 120° FOV. •...
SPECIFICATIONS AUDIO AND VIDEO Input/Output 1 x USB-C Video Resolutions (Max) 3840x2160 @30Hz Output Video Encoding MJPEG/YUY2/H.264/H.265 | UVC 1.1 CAMERA AND SENSOR Lens Fixed focus Sensor 1/2.8'', CMOS, Effective Pixel: 8.0M White Balance Auto Backlight Compensation Auto Digital Noise Reduction 2D, 3D Digital noise reduction supported Viewing Angle FOV 120°...
PANEL DESCRIPTION NAME DESCRIPTION Speaker Outputs audio signal of the input source. Microphone 4 x Linear mic arrays for picking up sound. Lens Camera lens Status LED • Constant blue: The device is powered on. The device is in standby state. •...
INSTALLATION Note: Before installation, please ensure the device is disconnected from the power source. To install the device on a monitor: Place the device on the top of a monitor, then adjust the bracket’s angle so that the device stands firmly on the monitor. To install the device on a tripod: 1.
Page 6
APPLICATION Application 1 - Huddle/small room (for 2~7 people) USB A/V HDMI Application 2 – Private office/Home office USB A/V HDMI Note: After the device is connected to a computer, it can be detected by the system and specific applications in the name of the following: •...
Page 7
Controls-Videos ELEMENTS DESCRIPTION/OPTIONS • Auto Framing (default): Camera tracks group participants automatically. • Speaker Tracking: Camera tracks speakers automatically. Tracking Mode • Presenter Tracking: Camera tracks the first recognized presenter automatically. • Off Tracking effect is available when Auto Framing is enabled. •...
Page 8
Controls-Color Adjustment ELEMENTS DESCRIPTION/OPTIONS Brightness Adjust the brightness of the camera manually. Contrast Adjust the contrast of the camera manually. Adjust the hue of the camera manually. Saturation Adjust the saturation of the camera manually. Sharpness Adjust the sharpness of the camera manually. Default Settings Restores all color parameters to their default values.
Page 9
Support ELEMENTS DESCRIPTION/OPTIONS About Displays device model and firmware information. About-Upgrade Select the firmware file and upload it for upgrade. Restore Restore Factory Defaults For further support or questions please contact us under https://www.purelink.de/en/anfrage-formular-purelink.de or scan the QR- code below...
DISCLAIMER OF LIABILITY PureLink GmbH will not be held liable, nor provide any warranty for damage resulting from improper installation, assembly and use of the product, or failure to observe the operating instructions and/or safety instructions.
Page 11
TRADEMARK Product model and logo are trademarks. All other trademarks mentioned in this manual are acknowledged as the property of the trademark owners. No part of this publication may be copied or reproduced without prior written permission of their respetive owners.
Page 12
PureLink GmbH PureLink UK LTD. Von-Liebig-Str. 10 Carpenter Court, 1 Maple Road D - 48432 Rheine Bramhall, Stockport Germany Cheshire SK7 2DH www.purelink.de United Kingdom V2 | 2024-04 WEEE-Reg.-No. DE 93 847 290...
Need help?
Do you have a question about the Vuelogic VL-VB200 and is the answer not in the manual?
Questions and answers