Summary of Contents for Kellfri 16-SSL2E1000
- Page 1 16-SSL2E1000 16-SSL2T1000 BIG BAG LIFTER Carefully read the operating instructions before using the product! Operating instructions translated from Swedish...
-
Page 2: Table Of Contents
Deviation form Warranty terms and conditions Kellfri designs and supplies efficient, affordable machinery and components for forestry, agriculture, construction and gardening in Sweden, the rest of the Nordic region and Europe. Please note that the information in this document is general and may not pertain to your particular machine. -
Page 3: Product Information
M12 x 30 (16 pcs.) Arm tube profile/thickness 80x60x5 mm 80x60x5 mm Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice. Table of Contents... -
Page 4: Safety Instructions
Unauthorised modifications and/or accessories may cause life-threatening injuries or death to users and others. Kellfri is not liable for any modifications, changes or rebuilds carried out by customers. Where the machine is used professionally, employers are responsible for ensuring that users of the machine have theoretical and practical knowledge of the machine and that work is performed in a safe manner. -
Page 5: Product Safety Information
PRODUCT SAFETY INSTRUCTIONS • Please read the tractor/loader's operating manual before connecting the attachment. • Overloading the main machine can cause the load to drop uncontrolled. The attachment must always be operated from the tractor cab. Never leave the tractor until the equip- ment has been unloaded and the tractor brakes engaged. -
Page 6: Before Use
BEFORE USE Carefully read the instruction manual. Make sure that you understand the safety instructions, the operating manual and warning decals. Use common sense and suitable personal protective equipment when using the product. Always check the performance of the machine combination to be used. -
Page 7: Connecting/Disconnecting Attachments
WARNING! Do NOT use the loader or attachment as a work platform. WARNING! Do NOT use the loader or attachment to lift or transport personnel. WARNING! Do NOT stand, walk or work under a lifted loader. -Always keep the workplace under supervision. -Never work with attachments that require personnel to be in close proximity to the load, e.g. -
Page 8: After Use
AFTER USE Do not park with a suspended load but with the equipment resting on the ground. Wash down the equipment with water if necessary. STORAGE Always store the equipment or product on a dry surface, preferably under a roof, when not in use. -
Page 9: Warning Decals
WARNING DECALS Make sure warning decals are always visible and clean them when necessary. Do not use a high-pressure washer directly on the warning decal. If a part with a decal is replaced, or the decal becomes worn or in any other way unusable, order a new set of decals. SYMBOL EXPLANATION Read the operating manual! Before carrying out work. -
Page 10: Brackets
Adjust the lifting arm by changing the pin. There are 3 positions. Brackets are mounted with an M16 x 30 bolt Euro bracket Trima bracket article no.: 20-8100 article no.: 20-8102 Table of Contents... - Page 11 NOTE: The maximum load is 1,000 kg when the lifting arm is set to the LOWEST position. The maximum load is 500 kg when the lifting arm is set to the HIGHEST position. IMPORTANT! When moving the big bag lifter it should be in an upright position, tilted backwards and kept low.
-
Page 12: Exploded View
Table of Contents... - Page 13 Table of Contents...
-
Page 14: Notes
NOTES: Table of Contents... -
Page 15: Deviation Form
DEVIATION FORM We are grateful for your help in pointing out any defects in the product supplied to you by Kellfri. Before making a claim, read Kellfri’s general purchase terms and conditions in our catalogue or on our website www.kellfri.co.uk, and in the operating manual if supplied. -
Page 16: Warranty Terms And Conditions
You are always welcome to give feedback or ask us about our equipment and products. Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice.
Need help?
Do you have a question about the 16-SSL2E1000 and is the answer not in the manual?
Questions and answers