Mobile DVR recorder
12 - 24 volt
Part 0-776-90
Before using this unit please check the parts list and read the instruction manual contained on the enclosed Mobile
DVR Surveillance disc.
*
Power Source - The DVR should be connected to a 12 - 24 volt dc power supply only.
*
Water and Moisture - Do not use the DVR where it may be subject to water ingress or excessive moisture.
Do not use outside the vehicle unprotected.
*
Heat - Do not install the DVR near any direct heat sources.
*
Ventilation - The DVR should be situated to allow free circulation of air.
*
Foreign Material - Care should be taken so that objects do not fall onto or into, and that liquids are not
spilled on the DVR.
*
Mounting Surface - The DVR should be mounted to a strong secure surface.
Service - The user should not attempt to service this units beyond that described in the operating
*
instructions. There are no user-serviceable parts within the unit.
The DVR is designed to record video from any Durite CCTV camera, it will also record certain event inputs and
driver information. The information is stored on a Compact flash card (not included), real time camera image
and recorded images can be displayed on a Durite CCTV monitor in the vehicle or the recorded information
stored on the CF can be displayed on a computer (a CF reader is required, not included). Please note the software
is windows based and is only available for PC and not MAC computers.
DVR unit
Remote control and cable with IR sensor
Multiple connector/power cable
Push button switch
Two connector cables; 8 pin plug to 4 pin plug and 6 pin plug to 4 pin socket
Splitter cable 8 pin plug to 1 x 8 pin socket and 1 x 4 pin socket
Mounting bracket x 2 and screws
PC disc containing instruction manual and software
2
4
6
8
10
12
14
16
7
13
1
3
5
9
1 1
15
I/O
Monitor/IR
Camera
8 pin plug
WARNINGS
Precautions
General
Contents
Connections
6 pin plug
4 pin socket
Connect to Durite camera
4 pin socket
Connect to IR receiver
8 pin plug
4 pin plug
Connect to
Durite monitor
8 pin socket
Mobile DVR recorder
12 - 24 volt
Part 0-776-90
Before using this unit please check the parts list and read the instruction manual contained on the enclosed Mobile
DVR Surveillance disc.
*
Power Source - The DVR should be connected to a 12 - 24 volt dc power supply only.
*
Water and Moisture - Do not use the DVR where it may be subject to water ingress or excessive moisture.
Do not use outside the vehicle unprotected.
*
Heat - Do not install the DVR near any direct heat sources.
*
Ventilation - The DVR should be situated to allow free circulation of air.
*
Foreign Material - Care should be taken so that objects do not fall onto or into, and that liquids are not
spilled on the DVR.
*
Mounting Surface - The DVR should be mounted to a strong secure surface.
Service - The user should not attempt to service this units beyond that described in the operating
*
instructions. There are no user-serviceable parts within the unit.
The DVR is designed to record video from any Durite CCTV camera, it will also record certain event inputs and
driver information. The information is stored on a Compact flash card (not included), real time camera image
and recorded images can be displayed on a Durite CCTV monitor in the vehicle or the recorded information
stored on the CF can be displayed on a computer (a CF reader is required, not included). Please note the software
is windows based and is only available for PC and not MAC computers.
DVR unit
Remote control and cable with IR sensor
Multiple connector/power cable
Push button switch
Two connector cables; 8 pin plug to 4 pin plug and 6 pin plug to 4 pin socket
Splitter cable 8 pin plug to 1 x 8 pin socket and 1 x 4 pin socket
Mounting bracket x 2 and screws
PC disc containing instruction manual and software
2
4
6
8
10
12
14
16
7
13
1
3
5
9
1 1
15
I/O
Monitor/IR
Camera
8 pin plug
WARNINGS
Precautions
General
Contents
Connections
6 pin plug
4 pin socket
Connect to Durite camera
4 pin socket
Connect to IR receiver
8 pin plug
4 pin plug
Connect to
Durite monitor
8 pin socket
Need help?
Do you have a question about the 0-776-90 and is the answer not in the manual?
Questions and answers