Page 1
HUB ASSEMBLY Hub assembly is as simple as setting the table. Install Hub by placing it wide-side down, directly over your fire pit’s flame ring. Hub will be centered inside the...
Page 2
Place these cooking surfaces over Hub so that the feet on the underside hug the outside of Hub’s upper ring. For Yukon, the feet will rest on the inside of Hub’s upper ring. OPEN FIRE COOKING:...
Page 3
The inverted flame ring can then be placed on top. Now your Solo Stove is ready for travel or your next cooking session! Hub’s 360° access windows let you tend to the cooking coals no matter where you’re seated around the fire. Add wood while you cook and stoke embers with your Tools, all without removing Hub or your cooking surface.
Page 4
When your fire pit and Hub have cooled completely, use an all purpose stainless steel cleaner, like Bar Keepers Friend, and a dry cloth to clean grease marks on the exterior. Hub and your fire pit are made of 304 stainless steel, and should not be cleaned with chainmail, harsh chemicals, or abrasives.
Need help?
Do you have a question about the HUB and is the answer not in the manual?
Questions and answers