Advertisement
Quick Links
Assembly instruction
Filling / emptying tool 2584100500 with filling / emptying plug 2580120101
1. Remove the white protective cap of the filling/emptying plug.
2. Screw on the filling / emptying tool and tighten it by hand. (Left-hand thread).
3. Remove the protective cap with the retaining loop of the filling/emptyinge tool.
4. Install hose with connection G ¾.
5. Open spindle (left-hand thread) with bleeder key / open-end spanner SW.
6. After inflow/outflow procedure, close spindle clockwise hand-tight.
7. Remove the filling and emptying tool.
8. Mount protective cap.
SW
We reserve the right to make changes in the design including measurement.
The product guarantee will not apply if you do not follow these instructions.
Stand: January 2023
SW
5 mm
AG2
G3/4
L
52 mm
H
59 mm
Durchflussmenge
bei 2bar:
25,8 l/min
ENGLISH
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Hummel 2584100500
- Page 1 Assembly instruction ENGLISH Filling / emptying tool 2584100500 with filling / emptying plug 2580120101 1. Remove the white protective cap of the filling/emptying plug. 2. Screw on the filling / emptying tool and tighten it by hand. (Left-hand thread). 3. Remove the protective cap with the retaining loop of the filling/emptyinge tool.
- Page 2 EPDM sealings. The compatibility with regard to EPDM sealings in the use of heating water additives can be seen in the producer’s manuals. The threads of HUMMEL threaded joints are, unless stated otherwise, manufactured according to DIN EN ISO 228-1.
Need help?
Do you have a question about the 2584100500 and is the answer not in the manual?
Questions and answers