Advertisement
Quick Links
Assembly Instructions
Typ 560 - Trash Bin
Enclosure for 3 Trash Bins
WxDxH: 213x93x116 cm
Assembly requires:
2 persons
-
Cordless or electric screwdriver with bits and drills
-
Folding ruler and pencil
-
Your substructure (foundation) should be several centimeters higher than the
ground level. The ground for your trash bin enclosure should be firm and precisely
leveled to ensure proper functioning of the door. We recommend a concrete slab or
a compacted gravel bed with laid paving slabs as the foundation.
Furthermore, we recommend securely anchoring the trash bin enclosure to the
ground.
Art.Nr. 43438
Stand: 2024
Paige1/9
Advertisement
Summary of Contents for BM Massivholz 560
- Page 1 Assembly Instructions Typ 560 - Trash Bin Enclosure for 3 Trash Bins WxDxH: 213x93x116 cm Assembly requires: 2 persons Cordless or electric screwdriver with bits and drills Folding ruler and pencil Your substructure (foundation) should be several centimeters higher than the ground level.
-
Page 2: Parts List
Parts list: 1x Door left 1x Door right 2x Side (576302) (576303) (576304) 3x Lid 2x Frame 2x Vack panel 4x Post (576300) (577097) (576305) (576301) 1x Brace 24x55x660 mm 1x Strip 24x68x1160 mm 2x Brace 24x55x1016 mm (572455) (572580) (572572) 1x Slam latch 6x Hinges... - Page 3 Attach side (1) to posts (7) with screw (F). Screw the side with posts (1+7) to the side of the back panel element (4) using screw (F). Paige3/9...
- Page 4 Screw the side with posts (1+7) to the side of the back panel element (4) using screw (F). Screw strip (10) to the back panel element (4) using screw (F). Maintain a distance of 19 mm between the vertical back panel strip and strip (10). Paige4/9...
- Page 5 Screw the elements together using screw (F). Screw frame parts (6) into the body using screw (G). Maintain an internal distance of 660 mm between the horizontal struts. Paige5/9...
- Page 6 Screw strips (8+9) together using screw (F). Screw the strip element from step 7 into the body, centering it with screw (G) and securing it laterally with screw (F) as per the instructions. The element must sit 18 mm lower than the top of the corner post (7)! Paige6/9...
- Page 7 Attach the cranked hinges (B) to the left door (3) and to the body using screw (E). Attach the cranked hinges (B) to the right door (2) and to the body using screw (E), also screw the slam latch (A) with screw (E). Paige7/9...
- Page 8 Screw the hinges (C) onto the lid (5) using screw (E). Attach the lid (5) to the body using screw (E). Align flush with the corner posts (7) on the right and left sides. Align the middle lid! Paige8/9...
- Page 9 Install the gas spring (D) according to the instructions. Seite 9/9...
Need help?
Do you have a question about the 560 and is the answer not in the manual?
Questions and answers