Symetrix xIO Bluetooth RCA-3.5 Quick Start Manual

Quick Start Guide: xIO Bluetooth RCA-3.5
What Ships in the Box
• xIO Bluetooth RCA-3.5
• Double gang Decora wall plate
®
(black or white)
• Four #6-32 x 5/8" Phillips
Countersunk screws
• Four #6-32 x 1/4" Slotted Oval Head
screws (black or white)
• This Quick Start Guide
What You Need to Provide
• Windows PC with the following
minimum specifi cations:
• 1 GHz or higher processor
• Windows 10 or higher
• 1 GB free storage space
• 1280x1024 graphics capability
• 16-bit or higher colors
• Internet connection
• 8 GB or more of RAM as required by
your operating system
• Network (Ethernet) interface
• CAT5e/CAT6 cable or an existing
Ethernet network
Getting Help
Symetrix Composer software includes
®
a help file which acts as a complete
User's Guide for hardware and software
configuration. For questions beyond the
scope of this Quick Start Guide, contact
the Technical Support Group:
Tel: +1.425.778.7728 ext. 5
Web: https://www.symetrix.co
Email: support@symetrix.co
Forum: https://www.symetrix.co/Forum
www.Symetrix.co | Support@Symetrix.co | +1.425.778.7728
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
This apparatus shall not be exposed
to dripping or splashing and no objects
fi lled with liquids, such as vases, shall
be placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install only in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.
9. Ensure proper ESD control and
grounding when handling exposed
I/O terminals.
10. Protect the cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specifi ed by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specifi ed by the
manufacturer, or sold with
the apparatus. When a
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualifi ed service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord or
plug cord is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF FIRE OR
WARNING:
ELECTRIC SHOCK DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE
AVIS:
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
SEE OWNERS MANUAL. VOIR CAHIER D'INSTRUCTIONS.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Il ne se trouve a l'interieur aucune piece pourvant entre reparée l'usager.
S'adresser a un reparateur compétent.
The lightning fl ash with arrowhead
symbol within an equilateral triangle is
intended to alert the user of the presence
of uninsulated "dangerous voltage" within
the product's enclosure that may be of
suffi cient magnitude to constitute a risk of
electric shock to persons. The exclamation
point within an equilateral triangle is
intended to alert the user of the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the product (i.e., this Quick
Start Guide).
User Serviceable Parts: There are no
user serviceable parts inside this Symetrix
product. In case of failure, customers
inside the U.S. should refer all servicing to
the Symetrix factory. Customers outside
the U.S. should refer all servicing to an
authorized Symetrix distributor. Distributor
contact information is available online at
www.symetrix.co.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Modifications not expressly approved by the
manufacturer could void the user's authority to
operate the equipment under FCC rules.
Cet appariel numerique de la classe B respecte
toutes les Exigences du Reglement sur le materiel
brouilleur du Canada.
Page 1 of 4