Makita UB004C Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Blower
  5. UB004C
  6. Instruction manual
Makita UB004C Instruction Manual

Makita UB004C Instruction Manual

Battery powered backpack blower
Hide thumbs Also See for UB004C:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Battery Powered Backpack
Blower
UB004C
Read before use.
Read before use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UB004C and is the answer not in the manual?

Questions and answers

Related Manuals for Makita UB004C

Summary of Contents for Makita UB004C

  • Page 1 INSTRUCTION MANUAL Battery Powered Backpack Blower UB004C Read before use. Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: UB004C *1 *2 Capacities Air volume 0 - 19.7 (20.9) m /min Air speed [average] 0 - 63.8 (67.6) m/s Air speed [max.] 0 - 76.3 (80.7) m/s Dimensions (L x W x H) 460 mm x 575 mm x 585 mm Rated voltage D.C.

  • Page 3: Declarations Of Conformity

    Sound power level (L ) : 96.1 dB (A) SAFETY WARNINGS Uncertainty (K) : 2.1 dB(A) NOTE: The declared noise emission value(s) has General power tool safety warnings been measured in accordance with a standard test method and may be used for comparing one tool with another. WARNING Read all safety warnings, instruc- NOTE: The declared noise emission value(s) tions, illustrations and specifications provided with may also be used in a preliminary assessment of...
  • Page 4 medication. A moment of inattention while oper- Do not use the power tool if the switch does ating power tools may result in serious personal not turn it on and off. Any power tool that cannot injury. be controlled with the switch is dangerous and must be repaired. Use personal protective equipment. Always wear eye protection.
  • Page 5 Always wear protective goggles to protect Do not use nozzles other than the nozzles • your eyes from injury when using power tools. provided by Makita. The goggles must comply with ANSI Z87.1 in • Do not use the blower to inflate balls, the USA, EN 166 in Europe, or AS/NZS 1336 rubber boat or the similar.
  • Page 6 Battery tool use and care before restarting and operating the blower. If Recharge only with the charger specified by the blower is damaged, ask Makita Authorized the manufacturer. A charger that is suitable for Service Centers for repair. one type of battery pack may create a risk of fire 17.
  • Page 7 10. If the battery cartridge gets wet, drain the Incoming foreign substance may block the water inside and then wipe it with a dry cloth. air channels and laden air flows. Remove any Dry the battery cartridge completely in a dry obstacles in the air path if the blowing perfor- place before use.
  • Page 8 18. Keep the battery away from children. SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Fig.1 Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting ► 1 . Flexible pipe 2. Hose clamp 3. Front pipe causing fires, personal injury and damage. It will 4. Screw also void the Makita warranty for the Makita tool and charger.
  • Page 9 Fig.4 ► 1 . Nozzles 2. Middle pipe Align the arrow mark on a nozzle with those on the middle pipe. Then slide the nozzle onto the front end of the middle pipe until the projection on the middle pipe is engaged with the cutout groove on the nozzle. Fig.2 ► 1 .
  • Page 10 in the figure. Slide the middle pipe out from the blower pipe to your desired length, and then turn the lock ring counter-wise to lock the middle pipe. Fig.9 Fig.7 NOTE: Make sure that the waist belt is in the recom- ► 1 . Lock ring 2. Middle pipe 3. Blower pipe mended position as shown in the figure. If the waist belt is above or below the recommended position, it is NOTE: Fasten the lock ring firmly to set the middle difficult to work comfortably.
  • Page 11 Fig.13 ► 1 . Hook and loop fastener Fig.11 Make a loose end of shoulder harness strap sev- ► 1 . Portable power pack unit eral folds and lay it flat over the tensioned strap. Tie them up together with the hook and loop fastener. Lock the buckle of the chest belt. Place the belt in a correct position as shown in the figure. Then adjust the lengths of the chest belt.
  • Page 12 the clamp screw. Fig.15 ► 1 . Control handle 2. Blower pipe 3. Clamp lever 4. Clamp screw Installing pipe support belt The pipe support belt helps to reduce the load on your hand during operation. Snap the hook on the shoulder Fig.17 harness to hang the blower pipes with the adjustable ► 1 . Blower pipe 2. Strap belt 3. Control cable belts.

  • Page 13: Functional Description

    Fig.21 ► 1 . Support belt Installing folding strap Fig.19 ► 1 . Snap hook 2. Hanger rings Safely strap the blower pipes to the shoulder harness while the machine is not in use. Do not hang the snap hook on the left shoulder harness. It may make it difficult to take the machine off in case of Hang a suspender on the hook in the left shoulder har- an emergency.
  • Page 14 Installing or removing portable power pack CAUTION: Always switch off the machine before installing or removing the portable power pack. CAUTION: Hold the machine and the portable power pack firmly when installing or removing portable power pack. Failure to hold them firmly may cause them to slip off your hands and result in damage to the machine and portable power pack and a personal injury.
  • Page 15 Fig.26 ► 1 . Cord 2. Cord holders Tie up the cord with the hook and loop band sewn on the harness over the right shoulder. Fig.28 ► 1 . Cord 2. Cord clip 3. Side pole Align the arrow mark on the plug of the machine with that on the socket of the portable power pack, and then insert the plug into the socket all the way.

  • Page 16: Overload Protection

    Battery indicator status Remaining battery capacity Blinking Charge the battery. NOTE: The indicator lamp for remaining battery capacity is just for a reference. The actual battery capacity may differ depending on the usage condi- tions or ambient temperature. NOTE: While the machine is in operation, the indica- tor lamp does not light up even if you press the check button. NOTE: The lamp automatically goes off after a few seconds. Fig.30 Machine/battery protection system ► 1 . Handle 2. Lock button The machine is equipped with a machine/battery Indicating the remaining battery protection system. This system automatically cuts off...

  • Page 17: Overheat Protection

    Charge the battery(ies) or replace it/them with press the main power switch. recharged battery(ies). Let the machine and battery(ies) cool down. Switch action If no improvement can be found by restoring protection system, then contact your local Makita Service Center. WARNING: Before installing the portable NOTICE: If the machine stops due to a cause power pack to the machine, always check to see not described above, refer to the section for that the switch trigger actuates properly and troubleshooting.
  • Page 18 Fig.34 Fig.36 ► 1 . Switch trigger ► 1 . Speed indicator You can use the machine in the boost mode. In the NOTE: The average duration of time you can operate boost mode, the air volume becomes larger than in the the machine in the boost mode is approximately 10 normal mode (cruise control mode). seconds.

  • Page 19: Electronic Function

    Electronic function The machine is equipped with the electronic function for easy operation. • Constant speed control The speed control function provides the constant rotation speed regardless of load conditions. Accidental re-start preventive function When you turn on the machine while pulling the switch Fig.40 trigger, the machine does not start and the low speed indicator blinks in green. To start the machine, first ► 1 .

  • Page 20: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the machine NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

  • Page 21: Optional Accessories

    Remove the battery immediately! OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita prod- uct specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.
  • Page 24 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885A63B227 20240221...

Table of Contents