Download Print this page

One Stop Gardens 93358 Owner's Manual & Safety Instructions

Hide thumbs Also See for 93358:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
93358
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Greenhouse
x
12' L
10' W
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
x
10' H
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24c

Advertisement

loading
Need help?

Need help?

Do you have a question about the 93358 and is the answer not in the manual?

Questions and answers

Summary of Contents for One Stop Gardens 93358

  • Page 1 Keep this manual and the receipt in a safe and dry place for future reference. Greenhouse 12’ L 10’ W 10’ H 93358 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
  • Page 2 Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 3 Do not allow debris to accumulate on top of the greenhouse. If snowfall is expected, place additional supports (not provided) underneath the Crown. NEVER enter a greenhouse with accumulated debris on top. SAVE THESE INSTRUCTIONS. Item 93358 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 • Check with local authorities to obtain all required building permits and to familiarize yourself with any building codes that may apply. Page 4 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 5 Face angled edges of the Base Plates (66,67) towards the corners of the base. Use Brace Bolts (53), Nuts (54), and Connectors (68,69) to secure the pieces together. Figure A: Base Item 93358 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Floor Plates to the Frame at this time. 142.75” Figure B: Wood Frame Dimensions Front Floor Plates (1, 2) Rear Floor Plates (5, 6) Door Door Side Side Figure C: Concrete Anchor Foundation - Cross Section Page 6 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 7 Top & Bottom 142.75” Figure D: Wood Base Dimensions Rear Floor Plates (5, 6) Front Floor Plates (1, 2) outside outside green- green- house house Figure E: Wood Base Cross Section Item 93358 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Plates (1, 2) Wood Screws Plates (4, 5, 6) Inside Inside Door Side Door Side Greenhouse Greenhouse Concrete Foundation Concrete Foundation Wood Sill Wood Sill Figure G: Wood Cross Section Page 8 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 9 Use two assistants to assemble Crown pieces to the frame. • Assemble on a clear, calm day. Wind will damage the Greenhouse and make assembly difficult. Assembling Basic Frame and Ceiling Plates Figure H: : Corners and Edges Item 93358 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 52, 54 to outside of Front Ceiling Plates and Base Plates (67) using Brace Bolts (53) and Nuts on top and Bolts and Nuts on bottom. Figure K: : Ceiling Plates Page 10 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 11 Center Stud holes, and Brace Bolts (53) and Nuts for remaining holes. The cutoff corners should be at the top, facing away from center of greenhouse. 10, 11 10, 11 Figure M: Crown Beam Install Item 93358 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 3. Swing Side Horizontal Braces up until they Brace Bolt (53) and Nut. (See Figure N.) overlap and secure to Side Studs (14) Using Brace Bolts (53) and Nuts. Figure N: Bushing Install Figure O: Side Frames Page 12 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 13 Rear Horizontal Braces (31) to outside of rear they overlap and secure to Studs using Brace Corner Posts (7) using bolts and Nuts. Bolts (53) and Nuts from the outside in. Figure P: Rear Frame Item 93358 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Assembling the Front Frame 1. Attach Front Horizontal Braces (32) to inside of Corner Posts (7) and Right and Left Doorway Studs (28,29) using Bolts and Nuts. Figure Q: : Front Frame Assembly Page 14 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 15 Beams will need adjusting when installing windows. of Roof Studs (15) (overlapping in the center) and Crown Beams (8-11) using Brace Bolts (53) and Nuts (54). Figure R: : Roof Assembly Item 93358 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 3. Attach Door Top Frame (35) to Side Door Frames with rounded portion facing front and the flange where pane sits facing center of door. Figure S: : Door Assembly Page 16 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 17 Window Pane to allow Nuts to thread on properly. film is facing out when installed. Note: Window Brace (81) comes pre-attached to Bottom Window Frame (40). Figure T: : Window Assembly Item 93358 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 Nut into hole on each side of Door Rails. Attach Right and Left Rail End Caps (60,61) onto ends of Door Rail. (See Figure U.) Figure U: : End Caps Figure V: : Mounting The Doors Page 18 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 19 Window Stops on bottom of place. Repeat for remaining windows. Window Support Beams (41). Slide window into place over Window Support Beam and gradually lower in place. Figure W: : Mounting The Windows Item 93358 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20 3. Use Panel Connectors (42) to connect lower Tapping Screw (59) through panel into rear Panels with upper rear Panels. Horizontal Braces (31) (See Figure X.) 10, 11 Figure X: : Panel Installation Page 20 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 21 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 93358 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22 Rear Horizontal Brace 5’ 10″ Front Horizontal Brace 2’ Side Doorway Beam 6’ 3″ Door Slider 2’ 10″ Top Door Frame 2’ 10″ Center Door Frame 2’ 10″ Bottom Door Frame 2’ 10″ Page 22 For technical questions, please call 1-888-866-5797. Item 93358...
  • Page 23 Front Side Panel 2’ x 6’ 5″ Screwdriver Door Panel 1’ 5″ x 2’ 10″ Door Screw M5 x 20 Door Roller Side Fixture Door Roller Screw Angle Fixture Window Brace Tapping Screw Item 93358 For technical questions, please call 1-888-866-5797. Page 23...
  • Page 24 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.