Honda CBR600R3 2024 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CBR600R3 2024
  6. Owner's manual
Honda CBR600R3 2024 Owner's Manual

Honda CBR600R3 2024 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

CBR600R3
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CBR600R3 2024 and is the answer not in the manual?

Questions and answers

Related Manuals for Honda CBR600R3 2024

Summary of Contents for Honda CBR600R3 2024

  • Page 1 CBR600R3 OWNER’S MANUAL...
  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 3 Congratulations on your purchase of a new The following codes in this manual ● Honda vehicle. Your selection of a Honda indicate each destination. makes you part of a worldwide family of The illustrations here in are based on the ●...
  • Page 4 A Few Words About Safety DANGER Your safety, and the safety of others, is very important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...

  • Page 5: Table Of Contents

    Contents Vehicle Safety P. 2 Operation Guide P. 20 Maintenance P. 108 Troubleshooting P. 154 Information P. 166 Specifications P. 181...

  • Page 6: Vehicle Safety

    Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Image Labels............P. 7 Safety Precautions..........P. 13 Riding Precautions ..........P. 14 Accessories & Modifications......P. 18 Loading ..............

  • Page 7: Safety Guidelines

    Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused, and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual.
  • Page 8 Safety Guidelines Ride Defensively Ride within Your Limits Always pay attention to other vehicles around Never ride beyond your personal abilities or you, and do not assume that other drivers see faster than conditions warrant. Fatigue and you. Be prepared to stop quickly or perform an inattention can impair your ability to use good evasive maneuver.
  • Page 9 Safety Guidelines Keep Your Honda in Safe Condition If You are Involved in a Crash It's important to keep your vehicle properly Personal safety is your first priority. If you or maintained and in safe riding condition. anyone else has been injured, take time to...
  • Page 10 Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colourless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.

  • Page 11: Image Labels

    Image Labels Image Labels The following pages describe the label Read instructions contained in Owner's meanings. Some labels warn you of Manual carefully. potential hazards that could cause serious injury. Others provide important safety Read instructions contained in Shop Manual information.
  • Page 12 Image Labels BATTERY LABEL DANGER • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protection and rubber gloves when handling the battery, or you can get burned or lose your eyesight by the battery electrolyte. •...
  • Page 13 Image Labels RADIATOR CAP LABEL DANGER NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 1.1 kgf/cm Continued...
  • Page 14 Image Labels ACCESSORIES AND LOADING WARNING LABEL WARNING ED, II ED type ACCESSORIES AND LOADING • The safety stability and handling of this vehicle may be affected by the addition of accessories and luggage. • Read carefully the instructions contained in user's manual and installation guide before installing any accessory.
  • Page 15 Image Labels TYRE INFORMATION & DRIVE CHAIN LABEL Cold tyre pressure: [Driver only] Front 250 kPa (2.50 kgf/cm , 36 psi) Rear 290 kPa (2.90 kgf/cm , 42 psi) [Driver and passenger] Front 250 kPa (2.50 kgf/cm , 36 psi) Rear 290 kPa (2.90 kgf/cm , 42 psi)
  • Page 16 Image Labels SAFETY REMINDER LABEL For your protection, always wear helmet, protective apparel. GS type GS type FUEL LABEL Unleaded petrol only ETHANOL up to 10 % by volume Premium Recommended ED, II ED type ED, II ED type FUEL LABEL Unleaded petrol only ETHANOL up to 10 % by volume Research Octane Number (RON) 95 or higher...

  • Page 17: Safety Precautions

    Safety Precautions Safety Precautions Face shield with unobstructed field of vision ● or other approved eye protection Ride cautiously and keep your hands on the ● WARNING handlebars and feet on the footpegs. Instruct your passenger to keep their hands Not wearing a helmet increases the ●...

  • Page 18: Riding Precautions

    Riding Precautions Riding Precautions Exercise caution on low traction surfaces. ● The tyres slip more easily on such surfaces and braking distances are Running-in Period longer. During the first 500 km (300 miles) of running, Avoid continuous braking. ● follow these guidelines to ensure your vehicle's Repeated braking, such as when future reliability and performance.
  • Page 19 Riding Precautions Anti-lock Brake System (ABS) Engine Braking This model is equipped with an Anti-lock Brake Engine braking helps slow your vehicle down System (ABS) designed to help prevent the when you release the throttle. For further brakes from locking up during hard braking. slowing action, downshift to a lower gear.
  • Page 20 Riding Precautions Slowly lean the vehicle to the left until its Parking weight rests on the side stand. Park on a firm, level surface. ● Turn the handlebars fully to the left. If you must park on a slight incline or loose ●...
  • Page 21 Torque Control may not compensate for rough Honda Selectable Torque Control road conditions or rapid throttle operation. When the Honda Selectable Torque Control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.

  • Page 22: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.

  • Page 23: Loading

    Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed and never exceed 130 km/h (80 mph) for the load you are carrying.

  • Page 24: Operation Guide

    Parts Location Rear seat (P.132) Tool kit (P.107) Document bag (P.107) Front seat (P.129) Main fuse (P.165) Fuse box (P.164) Battery (P.127) Rear brake fluid reservoir (P.137) Front brake lever (P.147) Throttle grip (P.146) Coolant reserve tank (P.135) Front suspension spring preload adjuster (P.148) Right middle Cowl...
  • Page 25 Clutch lever (P.143) Front suspension rebound damping/compression damping adjusters (P.149) (P.150) Front brake fluid reservoir (P.137) Fuel fill cap (P.105) Rear suspension compression damping adjuster (P.153) Rear suspension spring preload adjuster (P.151) Drive chain (P.141) Rear suspension rebound damping adjuster (P.152) Shift lever (P.101)
  • Page 26 Instruments Street mode Speedometer Clock (12-hour display) To set the clock: (P.67) Tachometer red zone (excessive engine rpm range) Tachometer NOTICE Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life. Display Check When the ignition switch is turned to the (On) position, the opening symbol will show on the display.
  • Page 27 Gear position indicator Shows 1st to 6th gear positions. “-”appears when the transmission is not shifted properly. Quick Shifter indicator Displays the current status of the Quick Shifter. ： Quick Shifter system is disabled. ： Quick Shifter upshifting is enabled. Multi-information display (P.25) Quick Shifter downshifting is...
  • Page 28 Instruments (Continued) Circuit mode To change to the circuit mode : Press and hold the button with your vehicle stopped. ● To return to the street mode display, press and hold the button. Select the “CIRCUIT” menu on the “DISPLAY” screen. ●...
  • Page 29 Multi-information display Multi-information display can display the coolant temperature gauge, riding modes, INFO 1, INFO 2 and INFO 3 displays. Riding mode Coolant temperature gauge ( (P.93) (P.26) INFO 3 display (P.39) INFO 1 display INFO 2 display (P.28) (P.31) You can change the riding mode, INFO1, INFO 2 and INFO 3 displays of the Multi- information display.
  • Page 30 Instruments (Continued) Coolant temperature gauge ( Display range: 35°C to 132°C 34°C or less: ”---” is displayed. ● Between 122°C and 131°C: ● High coolant temperature indicator lights. Coolant temperature digits flash. Above 132°C: ● High coolant temperature indicator lights. “132°C”...
  • Page 31 (up) button To switch the multi-information display To select the display area, repeatedly press the button. MODE Can not select the INFO 3 display while pop-up information displayed. (P.84) If the button is not pressed within 10 MODE (down) seconds, the display returns to the riding mode button button display.
  • Page 32 Instruments (Continued) INFO 1 display You can select the following: • Odometer [TOTAL] TOTAL (P.29) • Tripmeter [TRIP A/B] Changing the INFO 1 display Select the INFO 1 display. (P.27) TRIP A (P.29) Press the (up) or (down) button until the desired indication is displayed.
  • Page 33 Odometer [TOTAL] Tripmeter A/B [TRIP A/B] Total distance ridden. Distance ridden since the tripmeter was reset. When “------” is displayed, go to your dealer When “----.-” is displayed, go to your dealer for service. for service. To reset the tripmeter: (P.30) Continued...
  • Page 34 Instruments (Continued) To reset the tripmeter B, press and hold the To Reset the Tripmeter and Tripmeter button with the tripmeter B displayed. A Fuel Consumption MODE To reset tripmeter A and tripmeter A fuel consumption together, press and hold the Tripmeter B button with the tripmeter A or MODE...
  • Page 35 INFO 2 display You can select the following: • Numerical tachometer display [REV] • Current fuel mileage [INST. CONS.] • Average fuel mileage [AVE. CONS.] • Tripmeter A fuel consumption [TRIP A CONS.] • Average speed [AVG. SPD.] • Elapsed time [ELAPSED] •...
  • Page 36 Instruments (Continued) Numerical tachometer display (P.33) Current fuel mileage (P.33) Average fuel mileage (P.34) Tripmeter A fuel consumption (P.35) Average speed (P.35) Elapsed time (P.36) Only when reserve fuel mode: Available riding (P.38) distance (P.36) Amount of remaining Press the (up) button fuel (P.37)
  • Page 37 Numerical tachometer display [REV] Current fuel mileage [INST. CONS.] Displays engine revolutions per minutes. Displays the current instant fuel mileage. Display range: 0 to 17,000 r/min (rpm) Display range: Above 17,000 r/min (rpm): “17000” is 0.0 to 99.9 L/100km (km/L or MPG or mile/L ) ●...
  • Page 38 Instruments (Continued) Average fuel mileage [AVG. CONS.] To Reset the Average Fuel Mileage Displays the average fuel mileage since the Press and hold the button with the MODE average fuel mileage was reset. average fuel mileage displayed. Display range: 0.0 to 99.9 L/100km (km/L or MPG or mile/L ) Average fuel Above 99.9 L/100km: “--.-”...
  • Page 39 Tripmeter A fuel consumption [TRIP A Average speed [AVG. SPD.] CONS.] Displays average speed since the engine was Displays the tripmeter A fuel consumption started. since the tripmeter A was reset. Display range: Display range: 0 to 299 km/h (0 to 186 mph) 0.0 to 300.0 L (litres) or 0.0 to 300.0 GAL Initial display: “---”...
  • Page 40 Instruments (Continued) Elapsed time [ELAPSED] Available riding distance [RANGE] (Only Displays operating time since the engine was reserve fuel mode) started. When the low fuel indicator lights and the Display range: low fuel pop-up information appears, the 00:00 to 99:59 (hours:minutes) estimated available riding distance is Above 99:59: returns to 00:00.
  • Page 41 Amount of remaining fuel [REMAIN] (Only reserve fuel mode) When the low fuel indicator lights and the low fuel pop-up information appears, the estimated amount of remaining fuel can be selected. Display range: 4.0 to 1.0 L (litres) or 0.9 to 0.2 GAL (gallon) Below 1.0 L (0.2 GAL): “-.-”...
  • Page 42 Instruments (Continued) Reserve Fuel Mode Low fuel pop-up information When the low fuel indicator lights and the low fuel pop-up information appears, the available riding distance is indicated, and the amount of remaining fuel display can be selected. You should refill the tank as soon as possible. Remaining fuel amount turned to the reserve Available riding fuel mode:...
  • Page 43 INFO 3 display Changing the INFO 3 display Select the INFO 3 display. You can select the following: (P.27) Press the (up) or (down) • CBR Logo button until the desired display is displayed. • Shift indicator set value [REV IND NE] Press the button.
  • Page 44 Instruments (Continued) CBR logo Throttle grip angle [GRIP ANGLE] Displays the CBR logo. Displays the throttle grip angle during operation. Shift indicator set value [REV IND NE] When “--” is displayed, go to your dealer for Displays the shift indicator set value. service.
  • Page 45 Date [DATE] User letter Displays the today's date. Displays the characters of user's choice. Display range: Day of the week: MON to SUN DAY: 1 to 31 Month: JAN to DEC To set the USER LETTER: (P.61) Year: 2010 to 2099 Blank display Display the blank.
  • Page 46 Instruments (Continued) Setting mode GENERAL ● (P.66) Setting the date and clock You can perform the following: Setting each meter unit FUNCTION ● (P.45) Resetting to factory default settings Quick Shifter setting SERVICE ● (P.74) Setting the HISS Checking the next inspection schedule LAP TIME ●...
  • Page 47 Select a menu by pressing the (up) To Shift to the Setting Mode (down) button and press the Press and hold the button and MODE button. (up) or (down) button until main MODE Press and hold the (up) or menu screen is displayed with your vehicle (down) button to move the menu quickly.
  • Page 48 Instruments (Continued) Press the button MODE Ordinary display Press and hold the button MODE (up) or (down) button FUNCTION (P.45) Press the (up) button Press the (down) button LAP TIME (P.52) To end the setting DISPLAY (P.55) Select the “EXIT” menu on the main menu screen, or press and hold the button MODE...
  • Page 49 FUNCTION "FUNCTION" is selected FUNCTION To Set the FUNCTION Menu Select the “FUNCTION” menu on the main menu screen. (P.43) QUICK SHIFTER (P.46) Select a menu by pressing the (up) (down) button and press the HISS INDICATOR button. (P.51) MODE To end the setting (return) Select the...
  • Page 50 Instruments (Continued) To end the setting QUICK SHIFTER Select the (return) on the menu screen. You can change the setting of the Quick The display returns to the “QUICKSHIFTER” Shifter. menu on the “FUNCTION” screen. • UP: To use the Quick Shifter To select “ON”...
  • Page 51 Select “ON” (activate) or “OFF” (deactivate) using the (up) or (down) You can select “ON” (activate) or “OFF” button. (deactivate) for upshifting with the Quick Shifter. Select the “UP” using the (up) or (down) button, and press the button. MODE Press and hold the (up) or (down) button to move the menu...
  • Page 52 Instruments (Continued) DOWN Select “ON” (activate) or “OFF” (deactivate) using the (up) or (down) You can select “ON” (activate) or “OFF” button. (deactivate) for downshifting with the Quick Shifter. Select the “DOWN” using the (up) (down) button, and press the button.
  • Page 53 UP LVL Select one of the three levels using the (up) or (down) button. You can select the shift pedal load level for Press and hold the (up) or activating the Quick Shifter when upshifting. (down) button to move the menu Select the “UP LVL”...
  • Page 54 Instruments (Continued) DOWN LVL Select one of the three levels using the (up) or (down) button. You can select the shift pedal load level for Press and hold the (up) or activating the Quick Shifter when (down) button to move the menu downshifting.
  • Page 55 HISS INDICATOR You can select the blinking or turning off the HISS indicator. Select the “ON” (blinks) or “OFF” (off) using (up) or (down) button. Press the button. The HISS indicator MODE setting is set, and then the display returns to the upper level hierarchy.
  • Page 56 Instruments (Continued) LAP TIME "LAP TIME" is selected To Set the LAP TIME Menu LAP TIME Select the “LAP TIME” menu on the main menu screen. (P.43) Select the menu by pressing the LAP DATA (P.53) (up) or (down) button, and press button.
  • Page 57 angle and maximum right bank angle LAP DATA information, press the button. The history of recorded lap time and To end the display of lap time history, press information are displayed. button. The display returns to the To display the other lap information, press MODE upper level hierarchy.
  • Page 58 Instruments (Continued) CLEAR DATA Select “NO” (not clear) or “YES” (clear) using (up) or (down) button. Press the button. The display returns MODE to the upper level hierarchy. To use the Lap Timer (P.80)
  • Page 59 DISPLAY "DISPLAY" is selected To Set the DISPLAY Menu DISPLAY Select the “DISPLAY” menu on the main menu screen. (P.43) DISPLAY MODE (P.56) Select the menu by pressing the (up) or (down) button and press the button. MODE SHIFT INDICATOR (P.58) To end the setting BRIGHTNESS (P.59) Select the...
  • Page 60 Instruments (Continued) DISPLAY MODE When the “MECHANIC” is selected Press the button. The mechanic MODE Select “STREET”, “MECHANIC” or “CIRCUIT” mode ends, and then the display returns to using the (up) or (down) the upper level hierarchy. button. The display mode returns to the previously selected mode.
  • Page 61 Mechanic Mode Throttle grip position Displays the current information of the Tachometer Gear position vehicle. Displays the following information: Tachometer ● Gear position ● Throttle grip position ● Coolant temperature ● Battery voltage ● Battery voltage Coolant temperature Continued...
  • Page 62 Instruments (Continued) Press the button. The shift indicator SHIFT INDICATOR MODE setting is set, and then the display returns to You can change the setting of the shift the upper level hierarchy. indicators. Select the “OFF” (deactivate) or an engine revolution at which the shift indicators start blinking using the (up) or...
  • Page 63 BRIGHTNESS You can adjust the backlight brightness to one of the eight levels or select the auto adjustment. Automatic brightness control (P.171) Select the “AUTO” (auto adjustment) or brightness level using the (up) or (down) button. Press and hold the (up) or (down) button to move the menu quickly.
  • Page 64 Instruments (Continued) BACKGROUND You can change the setting of the background to one of the four categories or select the auto adjustment. Select the “AUTO”, “WHITE”, “BLACK”, “METALLIC” or “CARBON” using the (up) or (down) button. Press and hold the (up) or (down) button to move the menu quickly.
  • Page 65 USER LETTER You can select any 10 characters you like. Select the first character using the (up) or (down) button until a desired character appears Press and hold the (up) or (down) button to move the menu A list of characters that can be selected quickly.
  • Page 66 Instruments (Continued) To end the setting FAVORITE Select the (return) on the menu screen. You can change the indications on the INFO The display returns to the “FAVORITE” menu 1, INFO 2, and INFO 3 to the following on the “DISPLAY” menu screen. information by pressing the button while the street mode is displayed.
  • Page 67 INFO 1 Select the “TOTAL”, “TRIP A” or “TRIP B” using the (up) or (down) You can select the “TOTAL”, “TRIP A” or “TRIP button. B” for INFO 1. Press and hold the (up) or Select the “INFO 1” using the (up) or (down) button to move the menu (down) button, and press the...
  • Page 68 Instruments (Continued) INFO 2 Select the “REV”, “INST.CONS.”, “AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.” You can select the “REV”, “INST.CONS.”, or “ELAPSED” using the (up) or “AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.” or (down) button. “ELAPSED” for INFO 2. Press and hold the (up) or Select the “INFO 2”...
  • Page 69 INFO 3 Select the “CBR LOGO”, “REV IND NE”, “GRIP ANGLE”, “VOLTAGE”, “DATE”, “USER You can select the “CBR LOGO”, “REV IND LETTER” or blank display using the NE”, “GRIP ANGLE”, “VOLTAGE”, “DATE”, (up) or (down) button. “USER LETTER” or blank display for INFO 3. Press and hold the (up) or Select the “INFO 3”...
  • Page 70 Instruments (Continued) GENERAL "GENERAL" is selected GENERAL To Set the GENERAL Menu Select the “GENERAL” on the main menu screen. (P.43) Select a menu by pressing the (up) DATE & TIME (P.67) (down) button and press the button. MODE UNITS (P.68) To end the setting RESTORE DEFAULT (P.72) Select the...
  • Page 71 Press the button. The cursor moves DATE & TIME MODE to the indication of date. Press the (up) or (down) Press the (up) or (down) button until the desired tens digit of the year button until the desired date is displayed. is displayed.
  • Page 72 Instruments (Continued) amount of remaining fuel are changed in UNITS “SPEED” menu. You can change the speed and mileage, and The units of the current fuel mileage, average fuel mileage meter units. fuel mileage and amount of remaining fuel are changed in “FUEL CONS.” menu. To set each unit Select the “SPEED”...
  • Page 73 Speed and Mileage Unit [SPEED] Units of the current fuel mileage and ● Select the “km/h” or “mph” using the average fuel mileage show “L/100km” or (up) or (down) button. “km/L”. Press the button. The speed and MODE Units of the tripmeter A fuel consumption ●...
  • Page 74 Instruments (Continued) Fuel Mileage Meter Unit [FUEL CONS.] When selecting the “L/100 km” Units of the current fuel mileage and When the “km/h” of the “SPEED” menu is ● selected average fuel mileage show “L/100 km”. Select the “L/100 km” or “km/L” using the Units of the tripmeter A fuel consumption ●...
  • Page 75 When selecting the “mile/L” Units of the current fuel mileage and ● average fuel mileage show “mile/L”. Units of the tripmeter A fuel consumption ● and amount of remaining fuel show “L”. Continued...
  • Page 76 Instruments (Continued) Select the “NO” (not restore) or “YES” RESTORE DEFAULT (restore) using the (up) or The set value can be returned to default (down) button on the confirmation screen. setting. When the “NO” is selected Select the “NO” (not restore) or “YES” Press the button.
  • Page 77 Select the “EXIT” by pressing the Default setting values: MODE button. LAP DATA: Cleared ● DISPLAY MODE: STREET ● SHIFT INDICATOR: OFF ● BRIGHTNESS: AUTO ● BACK GROUND: AUTO ● USER LETTER: CBR600RR ● FAVORITE: TOTAL, REV, CBR LOGO ● SPEED UNIT: km/h ●...
  • Page 78 Instruments (Continued) SERVICE "SERVICE" is selected SERVICE To Set the SERVICE Menu Select the “SERVICE” menu on the main menu screen. (P.43) MAINTENANCE Select the menu by pressing the (P.75) (up) or (down) button and press the button. MODE QUICK SHIFTER (P.78) To end the setting SPORTS KIT ECU...
  • Page 79 Display range: MAINTENANCE DISTANCE: You can check the next inspection time and Next periodic inspection: change the setting of next inspection. -12000 to +99900 km (-8000 to +99950 mile) Next engine oil change: -6000 to +99980 km (-4000 to +99980 mile) Pass 0 km (mile): “-”...
  • Page 80 Instruments (Continued) When reaching any of the following, the pop-up information is appears in the ordinary display. (P.84) “-500 km”or “-300 mile” from the next ● periodic inspection “-100 km” or “-60 mile” from the next ● engine oil change One month before the set month ●...
  • Page 81 Next inspection setting Select “ ” (periodic inspection ) or “ ” (engine oil change) using the (up) (down) button. Press the (up) or (down) button until the desired distance value is displayed. Available setting range of periodic inspection: Press and hold the button until the MODE 100 to 12,000 km (100 to 8,000 mile)
  • Page 82 Instruments (Continued) Press the button. The cursor moves MODE QUICK SHIFTER to the indication of month. “INITIALIZE” and “EQUIPMENT” are displayed Press the (up) or (down) but not selectable. button until the desired month is displayed. Press the button. The cursor moves MODE to the tens digit of the year.
  • Page 83 SPORTS KIT ECU “SPORTS KIT ECU USAGE” is displayed but not usable. To return to the upper level hierarchy, press button. MODE Continued...
  • Page 84 Instruments (Continued) Lap Timer You can check and clear the recorded lap time data in the setting mode. You can record lap time in the circuit mode. (P.52) (P.53) (P.24) Previous lap time Best icon Previous lap number (Displayed when the fastest lap time displayed.) Lap number Lap time...
  • Page 85 The lap time data include lap time, maximum Maximum vehicle speed: vehicle speed, maximum engine revolutions, 0 to 299 km/h (0 to 186 mph) maximum coolant temperature, maximum acceleration, maximum deceleration, Maximum engine revolutions: maximum left bank angle and maximum right 0 to 20000 r/min (rpm) bank angle.
  • Page 86 Instruments (Continued) To record lap time, press the button at To Measure the Lap Time each lap. Press and hold the button or select the The stopwatch changes to display of the “CIRCUIT” menu on the “DISPLAY MODE” difference with the best lap. menu screen.
  • Page 87 To restart the measurement Previous lap time Press the button again. The stopwatch restarts measurement. Previous lap number Measurement starts from the next lap. To Check or Clear the Lap Time Select the “LAP TIME” menu in the setting mode. (P.52) (P.54) Difference with the best lap To end measurement, press and hold the...
  • Page 88 Instruments (Continued) Pop-up information If your vehicle has a problem with the PGM- FI, the failure information is displayed in In the following case, the INFO 3 display or priority to other information. the INFO 3 display and coolant temperature gauge change to a pop-up information Pop-up display.
  • Page 89 Maintenance Information Indication Explanation Remedy When the periodic inspection Have your vehicle inspected by time of your vehicle is your dealer. approaching. When the oil change time of Change the engine oil. your vehicle is approaching. Helpful Information Indication Explanation Remedy When the side stand is down.
  • Page 90 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Torque Control OFF indicator Comes on when the Torque Control is turned off. Shift indicators (P.89) Comes on briefly when the ignition switch is turned to the (On) position.
  • Page 91 High coolant temperature indicator Comes on briefly when the ignition switch is turned to the (On) position. If it comes on while riding: (P.156) ABS (Anti-lock Brake System) indicator Comes on when the ignition switch is turned to the (On) position. Goes off when your speed reaches approximately 10 km/h (6 mph).
  • Page 92 Indicators (Continued) HESD (Honda Electronic Steering Damper) indicator Comes on briefly when the ignition switch is turned to the (On) position. If it comes on while engine is running: (P.159) PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL) Comes on briefly when the ignition switch is turned to the (On) position.
  • Page 93 Shift Indicators Example set value: 11,600 r/min (rpm) The shift indicators light or blink by the 0 to 10,800 r/min (rpm) engine revolutions. The first indicator lights All indicators go off when the engine revolutions reach a number 10,800 r/min (rpm) 800 r/min (rpm) below a preset revolution First indicator comes on number.
  • Page 94 Switches button Operate the lap timer Horn button Hazard switch Turn signal switch Switchable when the ignition switch is in the (On) Pressing the switch turns position. the turn signal off. Headlight dimmer switch/Passing light control switch • : High beam •...
  • Page 95 Ignition switch (On) Turns electrical system Switches the electrical system on/off, locks on for starting/riding. the steering. Key can be removed when in the (Off) or (Off) (Lock) position. Turns engine off. (Lock) Locks steering. Engine stop switch/ Start button Should normally remain in the (Run) position.
  • Page 96 Switches (Continued) Steering Lock Locking Turn the handlebars all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the (Lock) position. A U-shaped wheel lock or similar device is Jiggle the handlebars if the lock is also recommended.
  • Page 97 Riding mode You can change the riding mode. Current riding mode The riding mode consists of the following parameters. P: Engine output level T: Torque control level W: Wheelie control level EB: Engine brake level EB value When “-” is displayed, go to your dealer for W value service.
  • Page 98 Riding mode (Continued) Riding mode has five modes. MODE 1, MODE 2 and MODE 3 Available riding mode: MODE 1, MODE 2, MODE 1 is suitable for track riding. MODE 2 is suitable for winding roads. MODE 3, USER 1 and USER 2. MODE 3 is suitable for street riding.
  • Page 99 P value (Engine output level) W value (Wheelie control level) P value has five setting levels. W value has four setting levels. Available setting range: 1 to 5 Available setting range: 1 to 3 Level 1 has the most power. Level 1 is the minimum Wheelie Control level.
  • Page 100 Riding mode (Continued) Selecting the riding mode MODE 1 Stop the vehicle. Select the riding mode display. (P.27) Press the (up) or (down) MODE 2 button with the throttle fully closed. (up) button MODE 3 USER 1 USER 2 (down) button button MODE Press the...
  • Page 101 Setting the riding mode Press the (up) or (down) button until the desired value is displayed. You can change the P, T, W and EB values on Press the button until EB value is the USER 1 and USER 2 of the riding mode. MODE selected.
  • Page 102 Riding mode (Continued) Press the button MODE Press and hold the MODE button Press the (up) button Press the (down) button Press and hold the (down) button...
  • Page 103 Starting the Engine Start your engine using the following Make sure the engine stop switch is in the (Run) position. procedure, regardless of whether the engine Turn the ignition switch to the (On) position. is cold or warm. Shift the transmission to Neutral ( indicator comes on).
  • Page 104 Starting the Engine (Continued) If you cannot start the engine: If the engine does not start: With the throttle slightly open (about 3 mm Open the throttle fully and press the start button for 5 seconds. (0.1 in), without freeplay) while starting the The engine will not start at this time.
  • Page 105 Shifting Gears Your vehicle transmission has 6 forward gears in a one-down, five-up shift pattern. If you put the vehicle in gear with the side stand down, the engine will shut off. Continued...
  • Page 106 Shifting Gears (Continued) Quick Shifter The Quick Shifter can be individually ● This system enables very quick up and down turned ON (active) and OFF (deactivate), shifting without clutch and throttle also the shift pedal load level for operations. activating the Quick Shifter can be This system does not function when adjusted during up and down shifting.
  • Page 107 Emergency Stop Signal Emergency stop signal activates when the The emergency stop signal stops operating system detects hard braking about 50 km/h when: (31 mph) or above to alert drivers behind you You release the brakes. ● about sudden braking by rapidly flashing The ABS is deactivated.
  • Page 108 Emergency Stop Signal (Continued) The emergency stop signal is not a system that can prevent a possible rear-end collision caused by your hard braking. It is always recommended to avoid hard braking unless it is absolutely necessary. The emergency stop signal does not activate with the hazard switch pressed in.
  • Page 109 Refuelling Closing the Fuel Fill Cap Ignition key Level plate After refuelling, push the fuel fill cap closed until it locks. Remove the ignition key and close the lock cover. The ignition key cannot be removed if the fuel fill cap is not locked. WARNING Petrol is highly flammable and Lock cover...
  • Page 110 Storage Equipment Helmet Holders WARNING The helmet holders and helmet set wire (in Riding with a helmet attached to the the tool kit) are located under the rear seat. holder can interfere with your ability to Helmet holder safely operate the vehicle and could lead to a crash in which you can be seriously hurt or killed.
  • Page 111 Tool Kit/Document Bag The tool kit and document bag are located under the rear seat. Tool kit Document bag Removing the Rear Seat (P.132)

  • Page 112: Maintenance

    Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ......P. 109 Side Stand ............P. 140 Maintenance Schedule........P. 110 Drive Chain ............P. 141 Maintenance Fundamentals ......

  • Page 113: Importance Of Maintenance

    Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your vehicle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required. performance, avoid breakdowns, and reduce air We cannot warn you of every conceivable pollution.

  • Page 114: Maintenance Schedule

    Maintenance work should be performed in new owner. accordance with Honda's standards and specifications by properly trained and equipped Honda recommends that your dealer should technicians. Your dealer meets all of these road test your vehicle after each periodic requirements. Keep an accurate record of maintenance is carried out.
  • Page 115 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 116 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 115 × 1,000 mi Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years Brake Pads Wear Brake System Brakelight Switch Headlight Aim –...
  • Page 117 Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Lubricate : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 118 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 115 × 1,000 mi Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years Brake Pads Wear Brake System Brakelight Switch Headlight Aim –...

  • Page 119: Maintenance Fundamentals

    Maintenance Fundamentals Drive chain - Check condition and slack, Pre-ride Inspection ● adjust and lubricate if necessary P. 141 To ensure safety, it is your responsibility to Brakes - Check operation; ● perform a pre-ride inspection and make sure Front and Rear: check brake fluid level and that any problem you find is corrected.
  • Page 120 Maintenance Fundamentals WARNING Replacing Parts Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in which you can be seriously hurt or ED, II ED type killed.
  • Page 121 Maintenance Fundamentals Battery This symbol on the battery means that this product must not be treated as Your vehicle has a maintenance-free type household waste. battery. You do not have to check the battery electrolyte level or add distilled water. Clean the NOTICE battery terminals if they become dirty or An improperly disposed of battery can be...
  • Page 122 Cleaning the Battery Terminals NOTICE Remove the battery. P. 127 Installing non-Honda electrical accessories can If the terminals are starting to corrode and overload the electrical system, discharging the are coated with a white substance, wash battery and possibly damaging the system.
  • Page 123 Blown fuse Selecting the Engine Oil For recommended engine oil, see “Specifications.” P. 182 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: NOTICE JASO T 903 standard : MA ●...
  • Page 124 The API classification specifies the quality and Recommended brake fluid: performance rating of engine oils. Use SJ or higher Honda DOT 4 Brake Fluid or equivalent oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the circular API Drive Chain service symbol.
  • Page 125 Maintenance Fundamentals If the chain does not move smoothly, makes Cleaning and Lubricating strange noises, has damaged rollers, has loose After inspecting the slack, clean the chain and pins, has missing O-rings, or has kinks, have the sprockets while rotating the rear wheel. Use a dry chain inspected by your dealer.
  • Page 126 Do not use a steam cleaner, a high pressure Recommended Coolant cleaner, a wire brush, volatile solvent such as Pro Honda HP Coolant is a pre-mixed solution petrol and benzene, abrasive cleaner, chain of antifreeze and distilled water. cleaner or lubricant NOT designed specifically...
  • Page 127 Maintenance Fundamentals Inspecting for Damage Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for Visually inspect your tyres and use an air cuts, slits, or cracks that pressure gauge to measure the air pressure at expose fabric or cords, least once a month or any time you think the or nails or other tyres look low.
  • Page 128 Maintenance Fundamentals WARNING Inspecting Tread Depth Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a For safe riding, you should replace the tyres crash in which you can be seriously hurt when the minimum tread depth is reached.
  • Page 129 ● equivalents of the same size, construction, speed rating, and load range. Always use the size and type of tyres Have the wheel balanced with Honda ● recommended in this owner's manual. Genuine balance weights or equivalent after the tyre is installed.

  • Page 130: Tools

    Tools The tool kit is located under the rear seat. P. 107 You can perform some roadside repairs, minor adjustments and parts replacement with the provided tools. 5 mm Hex wrench ● 3 mm Hex wrench ● Fuse puller ● Helmet set wire ●...

  • Page 131: Removing & Installing Body Components

    Removing & Installing Body Components Battery Unhook the rubber strap from left side. Disconnect the negative - terminal from Battery the battery. Rubber strap Disconnect the positive + terminal from the battery. Remove the battery, taking care not to drop the terminal nuts. Installation Install the parts in the reverse order of removal.

  • Page 132: Clip

    Removing & Installing Body Components Clip Clip Installation Removal Push the bottom of the centre pin. Insert the clip into the hole. Press down on the centre pin to lock the Press down on the centre pin to release clip. the lock.

  • Page 133: Front Seat

    Removing & Installing Body Components Front Seat Front Seat Removal Pull the rear corners of the front seat up, Mounting bolts then remove the mounting bolts. Pull the front seat back and up. Front seat Installation Insert the tab into the recess. Install and tighten the mounting bolts securely.

  • Page 134: Right Middle Cowl

    Removing & Installing Body Components Right Middle Cowl Right Middle Cowl Remove the prongs and tab from the frame cover. Removal Remove the tab from the winglet. Remove the bolts A and bolt B. Frame cover Winglet Remove the clips A and clip B. P.
  • Page 135 Removing & Installing Body Components Right Middle Cowl Installation Remove the hook and tabs from the intake lower cover. Then remove the right Install the right middle cowl in the reverse middle cowl. order of removal. Intake lower cover Hook Tabs Right middle cowl...

  • Page 136: Rear Seat

    Removing & Installing Body Components Rear Seat Rear Seat Removal Insert the ignition key into the seat lock. Prongs Rear seat Turn it clockwise, then pull the rear seat Seat hook forward and up. Installation Insert the prongs into the seat hook and guide hooks.

  • Page 137: Engine Oil

    Engine Oil Checking the Engine Oil Oil fill cap Oil level If the engine is cold, idle the engine for 3 inspection to 5 minutes. window Turn the ignition switch to the (Off) Upper level position and wait for 2 to 3 minutes. Place your vehicle in an upright position on a firm, level surface.
  • Page 138 Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil. oil can cause damage to your engine. Do not mix P.

  • Page 139: Coolant

    Coolant Checking the Coolant UPPER level Reserve tank cap Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between the UPPER level and LOWER level marks on the reserve tank.
  • Page 140 Coolant Adding Coolant Adding Coolant WARNING Removing the radiator cap while the If the coolant level is below the LOWER level engine is hot can cause the coolant to mark, add the recommended coolant spray out, potentially scalding you. P. 122) until the level reaches the UPPER level mark.

  • Page 141: Brakes

    Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or the brake lever and pedal freeplay becomes excessive, Place your vehicle in an upright position inspect the brake pads for wear. on a firm, level surface.
  • Page 142 Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Always inspect both left and right Check the condition of the brake pad wear brake calipers. indicators. Inspect the brake pads from the rear Rear The pads need to be replaced if a Front...
  • Page 143 Brakes Adjusting the Brakelight Switch Adjusting the Brakelight Switch Brakelight switch Check the operation of the brakelight switch. Hold the brakelight switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 144: Side Stand

    Side Stand Checking the Side Stand Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand. If the engine doesn't stop, have your vehicle inspected by your dealer.

  • Page 145: Drive Chain

    Drive Chain Inspecting the Drive Chain Slack Drive chain Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding. Have the chain inspected by your dealer. Shift the transmission to Neutral.
  • Page 146 Drive Chain Checking the Drive Chain Slider Checking the Drive Chain Slider Check the condition of the drive chain slider. The drive chain slider will need to be replaced if the chain slider is worn to the wear limit line. If necessary, have the drive chain slider replaced by your dealer.

  • Page 147: Clutch

    Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary, have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay. commercially available cable lubricant to Freeplay at the clutch lever: prevent premature wear and corrosion.
  • Page 148 Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper clutch cable adjuster Freeplay － Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. ＋ Turn the clutch cable adjuster until the freeplay is 10 - 20 mm (0.4 - 0.8 in). Upper lock nut...
  • Page 149 Clutch Adjusting the Clutch Lever Freeplay Lower Adjustment Lower lock nut Adjusting nut If the upper clutch cable adjuster is threaded out near its limit, or the correct freeplay cannot be obtained, attempt adjustment with the lower clutch cable adjusting nut. Turn the upper clutch cable adjuster all the way in (to provide maximum freeplay).

  • Page 150: Throttle

    Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly or close automatically, have the vehicle inspected by your dealer. Throttle...

  • Page 151: Other Adjustments

    Other Adjustments Adjusting the Brake Lever Index mark You can adjust the distance between the brake lever and handle grip. Adjuster Adjustment method Turn the adjuster until the numbers align with Forward the index mark while pushing the lever forward in the desired position. After adjustment, check that the lever operates correctly before riding.

  • Page 152: Adjusting The Front Suspension

    Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload You can adjust the spring preload by the adjuster to suit the load or the road surface. The spring preload adjuster has 15 turns. Turn clockwise to increase spring preload Adjuster (hard), or turn counterclockwise to decrease spring preload (soft).
  • Page 153 Other Adjustments Adjusting the Front Suspension Rebound Damping You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. The TEN adjuster has 5 1/2 turns. Turn clockwise to increase rebound damping (hard), or turn counterclockwise to decrease rebound damping (soft).
  • Page 154 Other Adjustments Adjusting the Front Suspension Compression Damping You can adjust the compression damping by the COM adjuster to suit the load or the road surface. The COM adjuster has 7 turns. Turn clockwise to increase compression damping (hard), or turn counterclockwise to decrease compression damping (soft).

  • Page 155: Adjusting The Rear Suspension

    Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension Pin spanner 1 2 3 4 5 6 7 Adjusting the suspension requires a pin spanner. We recommend that you have your vehicle serviced by your dealer. Spring Preload You can adjust the spring preload by the Adjuster adjuster to suit the load or the road surface.
  • Page 156 Other Adjustments Adjusting the Rear Suspension Rebound Damping Reference punch mark You can adjust the rebound damping by the adjuster to suit the load or the road surface. The rebound damping has 3 turns. Turn clockwise to increase rebound damping (hard), or turn counterclockwise to decrease rebound damping (soft).
  • Page 157 Other Adjustments Adjusting the Rear Suspension Compression Damping Punch mark You can adjust the compression damping by the adjuster to suit the load or the road surface. The compression damping adjuster has 32 clicks. Turn clockwise to increase compression Reference damping (hard), or turn counterclockwise to Adjuster punch mark...

  • Page 158: Troubleshooting

    Low Oil Pressure Indicator ......P. 157 PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL)....P. 158 ABS (Anti-lock Brake System) Indicator ..P. 159 HESD (Honda Electronic Steering Damper) Indicator ............P. 159 Torque Control Indicator......... P. 160 Tyre Puncture ........... P. 161...

  • Page 159: Engine Will Not Start (Hiss Indicator Stays On)

    Engine Will Not Start (HISS indicator stays on) Starter Motor Operates But Check if there are no any metallic seals or stickers on the key. Engine Does Not Start If the HISS indicator still stays on, have your vehicle inspected by your dealer. Check the following items: Check the correct engine starting Starter Motor Does Not...

  • Page 160: Overheating (High Coolant Temperature Indicator Is On)

    Overheating (High coolant temperature indicator is on) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the ignition switch to the High coolant temperature indicator (Off) position. ● comes on. If the fan is not operating: Suspect a fault.

  • Page 161: Warning Indicators On Or Flashing

    Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious problem. Have your vehicle inspected by If the low oil pressure indicator comes on, your dealer.

  • Page 162: Pgm-Fi (Programmed Fuel Injection) Malfunction Indicator Lamp (Mil)

    Warning Indicators On or Flashing PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL) PGM-FI (Programmed Fuel What to do when the indicator lamp comes on Injection) Malfunction Avoid high speeds and immediately get your Indicator Lamp (MIL) vehicle inspected at a dealer. NOTICE GS type If you drive with the malfunction indicator lamp...

  • Page 163: Abs (Anti-Lock Brake System) Indicator

    30 km/h problem with the ABS. Reduce your speed (19 mph). and have your vehicle inspected by your dealer as soon as possible. HESD (Honda Electronic Steering Damper) Indicator Indicator comes on or starts flashing while ● riding.

  • Page 164: Torque Control Indicator

    Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator When the indicator comes on while the Torque Control is in operation, you will have to completely close the throttle to If the indicator operates in one of the regain normal riding ability.

  • Page 165: Tyre Puncture

    Tyre Puncture WARNING Repairing a puncture or removing a wheel requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tyre repair can be risky. If the temporary performed by your dealer. repair fails, you can crash and be After an emergency repair, always have the seriously injured or killed.

  • Page 166: Electrical Trouble

    Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle Follow the procedure below to replace a battery charger. burned-out light bulb. Remove the battery from the vehicle before Turn the ignition switch to the (Off) or charging.
  • Page 167 Electrical Trouble Burned-out Light Bulb License Plate Light Bulb The headlights, front turn signals/position lights, brakelight, taillight and rear turn Remove the screws, license light cover signals use several LEDs. and license light cover packing. Pull out the bulb without turning. If there is an LED which is not turned on, see Bulb License light cover...

  • Page 168: Blown Fuse

    Electrical Trouble Blown Fuse Blown Fuse Fuse box cover Before handling fuses, see “Inspecting and Replacing Fuses.” P. 119 Fuse Box Fuses Remove the front seat. P. 129 Remove the fuse box cover. Pull the fuses out one by one with the Spare fuses fuse puller in the tool kit and check for a blown fuse.
  • Page 169 Electrical Trouble Blown Fuse Main Fuse Remove the front seat. P. 129 Disconnect the wire connector of the Starter magnetic switch starter magnetic switch. Wire connector Pull the main fuse out and check for a Main fuse blown fuse. Always replace a blown fuse with a spare of the same rating.

  • Page 170: Information

    Information Service Diagnostic Recorders....... P. 167 Keys..............P. 167 Instruments, Controls, & Other Features... P. 168 Caring for Your Vehicle........P. 171 Storing Your Vehicle........P. 175 Transporting Your Vehicle ......P. 176 You & the Environment ......... P. 177 Serial Numbers ..........

  • Page 171: Service Diagnostic Recorders

    Avoid prolonged exposure to sunlight or ● of the vehicle owner. high temperatures. However this data may be accessed by Honda, Do not grind, drill or in any way alter their ● its authorised dealers and authorised repairers, shape.

  • Page 172: Instruments, Controls, & Other Features

    Instruments, Controls, & Other Features Instruments, Controls, & To make a duplicate key and register it with your HISS system, take the spare key, the key Other Features number plate, and the vehicle to your dealer. Store the key number plate in a safe Ignition Switch location.
  • Page 173 Each tripmeter resets to 0.0 when the trip (Radio Equipment) Directive (2014/53/EU). mileage exceeds 9,999.9. HISS The Honda Ignition Security System (HISS) The declaration of conformity to RE Directive is immobilizes the engine's ignition system if an provided to the owner at the time of purchase.
  • Page 174 Instruments, Controls, & Other Features Document Bag HESD The owner’s manual, registration, and insurance The Honda Electronic Steering Damper (HESD) information can be stored in the plastic automatically controls the steering damper document bag located under the rear seat. characteristics in accordance with vehicle speed and acceleration.

  • Page 175: Caring For Your Vehicle

    This model is equipped with a Throttle by Wire Frequent cleaning and polishing is important to System. ensure the life of your Honda. A clean vehicle Do not put magnetized items or items makes it easier to spot potential problems.
  • Page 176 Caring for Your Vehicle Avoid directing water into the air cleaner, Washing Precautions muffler, and electrical parts. Follow these guidelines when washing: Thoroughly rinse your vehicle with plenty of Do not use high-pressure washers: ● clean water and dry with a soft, clean cloth. High-pressure water cleaners can After the vehicle dries, lubricate any moving damage moving parts and electrical...
  • Page 177 Caring for Your Vehicle Do not direct water at the air cleaner: Aluminium Components ● Water in the air cleaner can prevent the Aluminium will corrode from contact with dirt, engine from starting. mud, or road salt. Clean aluminium parts Do not direct water near the headlight: ●...
  • Page 178 Caring for Your Vehicle Windscreen Exhaust Pipe and Muffler Using plenty of water, clean the windscreen with The exhaust pipe and muffler are stainless steel a soft cloth or sponge. (Avoid using detergents but may become stained by mud or dust. or any kind of chemical cleaner on the windscreen.) Dry with a soft, clean cloth.

  • Page 179: Storing Your Vehicle

    Storing Your Vehicle Storing Your Vehicle Front fork Mud and dust may accelerate wear on the front If you store your vehicle outdoors, you should forks and cause oil leaks. consider using a full-body cover. To avoid scratching, please handle the forks If you won't be riding for an extended period, with the following care.

  • Page 180: Transporting Your Vehicle

    Transporting Your Vehicle Transporting Your Vehicle Remove the battery ( P. 127) to prevent ● discharge. Fully charge the battery and then If your vehicle needs to be transported, it place it in a shaded, well-ventilated area. should be carried on a motorcycle trailer or a If you leave the battery in place, flatbed truck or trailer that has a loading ramp disconnect the negative - terminal to...

  • Page 181: You & The Environment

    You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling centre. but you must do your part to protect the Call your local or state office of public works or environment.

  • Page 182: Serial Numbers

    Serial Numbers Serial Numbers The frame and engine serial numbers uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place. Frame number Engine number...

  • Page 183: Fuels Containing Alcohol

    Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line. ●...

  • Page 184: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.

  • Page 185: Specifications

    Specifications Main Components ■ Displacement 599 cm (36.5 cu-in) Overall length 2,030 mm (79.9 in) Bore x stroke 67.0 x 42.5 mm (2.64 x 1.67 in) Overall width 685 mm (27.0 in) Compression ratio 12.2:1 Overall height 1,140 mm (44.9 in) Unleaded petrol Wheelbase 1,370 mm (53.9 in)
  • Page 186 Specifications Service Data ■ Honda 4-stroke motorcycle oil API Service Classification SJ or higher, excluding oils Front 120/70ZR17M/C (58W) Recommended Tyre size marked as “Energy Conserving” or “Resource Rear 180/55ZR17M/C (73W) engine oil Conserving,” SAE 10W-30, JASO T 903 Tyre type...
  • Page 187 Specifications Drive sprocket Standard sprocket size Driven sprocket Bulbs ■ Headlight Brakelight/Taillight Front turn signal/Position light LED Rear turn signal License plate light 12 V-5 W Fuses ■ Main fuse 30 A Other fuse 30 A, 20 A, 10 A...
  • Page 188 Online Owner’s Manual https://www.hondamotopub.com/ 32MKZ700 XXX.XXXX.XX.R 00X32-MKZ-7000 PRINTED IN XXXXX...

Table of Contents

Save PDF