Advertisement
Quick Links
Installation, Operating and Maintenance
Instructions for Jola floating switches SI/...
and for Jola immersion probes TS/SI/...
Installation, Operating and Maintenance
SI/.../Variant .
Jola Immersion Probes with mounted Floating Switches
TS/.../. x SI/.../Variant .
TS/.../. x SI/.../Variant .
These Installation, Operating and Maintenance
Instructions must always be handed over to the
fitter/operator/service personnel
of our products together with all other user
documentation and information!
They should be stored in a safe place together
with all other user documentation and information
so they can be consulted again when necessary at
Jola Spezialschalter GmbH & Co. KG
Klostergartenstr. 11 • 67466 Lambrecht (Germany)
Tel. +49 6325 188-01 • Fax +49 6325 6396
contact@jola-info.de • www.jola-info.de
Instructions for
Jola Floating Switches
SI/.../Variant .
II 1 G or .
and
Ex ia I Mb
Ex ia IIC T1...T6 Ga or
Ex ia IIB T1...T6 Ga or
Ex ia IIC T1...T6 Gb or
Ex ia IIB T1...T6 Gb or
Ex ia IIA T1...T6 Gb
any time!
03.03.2014
I M2,
II 2 G
I M2 or
II 2 G
1/16
Advertisement
Related Manuals for Jola SI Variant Ex I M2,
Summary of Contents for Jola SI Variant Ex I M2,
- Page 1 Jola Floating Switches SI/…/Variant . I M2, SI/.../Variant . II 1 G or . II 2 G Jola Immersion Probes with mounted Floating Switches TS/.../. x SI/.../Variant . I M2 or TS/.../. x SI/.../Variant . II 2 G Ex ia I Mb Ex ia IIC T1...T6 Ga or...
- Page 2 Installation, Operating and Maintenance 2/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Area of application The floating switches or the immersion probes with mounted floating switches JOLA D-67466 Lambrecht 0080 SI/.../Variant . I M2 or SI/.../Variant .
- Page 3 Installation, Operating and Maintenance 3/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 The floating switches Sl/... or the immersion probes TS/.../1 x SI/.../Variant . with one mounted floating switch SI/.../Variant . serve as individual switches that give off an alarm signal when the liquid level reaches a certain point (e.g.
- Page 4 Installation, Operating and Maintenance 4/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 All the technical parameters of the floating switch or immersion probe are listed in this brochure and the accompanying product description. You must always observe and follow all the instructions relating to these parameters.
- Page 5 Installation, Operating and Maintenance 5/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 The output parameters of the voltage source must be equivalent to or lower than the input parameters of the units as defined below.
- Page 6 DIN A 5 leaflet "User information/Instructions for use with mounting, operating and maintenance instructions for the product...". If the leaflet is not supplied with the product or is lost, you must always request a replacement leaflet from Jola. 5. Installation of the floating switches SI/.../Variant .
- Page 7 (e.g. from Jola) which match the cable used. If you simultaneously order floating switches and stuffing glands from Jola – or if you order the stuffing glands at a later date but specify the cable used for the...
- Page 8 Always ensure that both the stuffing gland and the gaskets are sufficiently chemically and thermally resistant to the liquid to be monitored. The gaskets supplied by Jola are standard gaskets which may not be suitable for all liquids. If you have the slightest doubt, you must replace them with other more suitable gaskets.
- Page 9 Installation, Operating and Maintenance 9/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Mounting using a metallic mounting pipe: Depending on the application, you can also fasten the floating switch(es) at the desired switching height(s) using a metallic mounting pipe.
- Page 10 Installation, Operating and Maintenance 10/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 The external fixing weight is fastened to the cable in different ways depending on the type of fixing weight. The supplied product documentation outlines the mounting details.
- Page 11 Installation, Operating and Maintenance 11/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Immersion probes with threaded screw-in nipple or flange If you have ordered and received immersion probes TS/.../. x SI/.../Variant .. with threaded screw-in nipple or flange, these probes are installed via the relevant opening.
- Page 12 Installation, Operating and Maintenance 12/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Floating switches SI/SSR 1/K/.../Variant .: Connect the green-yellow conductor of the cable of the floating switch and, if present, the metallic screen of the cable of the floating switch to the potential equalisation system.
- Page 13 Installation, Operating and Maintenance 13/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Special feature of the fixing weight for mounting on to antistatic cable, type FG 55x93/Ex/KLF or FG 55x93/E/KLF/Ex: When using a floating switch SI/SSX/LF/4/1/K/PURLF/Variant . which is...
- Page 14 Installation, Operating and Maintenance 14/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Immersion probes TS/.../. x SI/.../Variant .: Connect the external earth connection terminal on the screw-in nipple or on the flange of the unit to the potential equalisation system.
- Page 15 Installation, Operating and Maintenance 15/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Connect the cable itself as shown below: Push a screwdriver into the opening as shown in the drawing. Open the relevant terminal by pushing the...
- Page 16 Installation, Operating and Maintenance 16/16 Instructions for Jola floating switches SI/… and for Jola immersion probes TS/SI/… 03.03.2014 Where risks cannot be ruled out, you should adhere to an inspection frequency suited to the application in question and laid down in consultation with the relevant supervisory authorities.
-
Page 17: Eu Declaration Of Conformity
EU Declaration of Conformity Jola Spezialschalter GmbH & Co. KG Klostergartenstr. 11 67466 Lambrecht (Germany) declares as manufacturer under its sole responsibility that the following products, which are new and designed for use in potentially explosive atmospheres: floating switches SI/…/Variant .
Need help?
Do you have a question about the SI Variant Ex I M2, and is the answer not in the manual?
Questions and answers