Advertisement
Quick Links
Installation, Operating and Maintenance
Instructions for Jola immersion probes
TSR and NTR/.../../Variant . /Ex-.
Installation, Operating and Maintenance
TSR/.../../Variant ./Ex-M
TSR/.../../Variant ./Ex-0G
TSR/.../../Variant ./Ex-0G
TSR/.../../Variant ./Ex-1G
NTR/.../../Variant ./Ex-M
NTR/.../../Variant ./Ex-0G
NTR/.../../Variant ./Ex-0G
NTR/.../../Variant ./Ex-1G
These Installation, Operating and Maintenance
Instructions must always be handed over to the
fitter/operator/service personnel
of our products together with all other user
documentation and information!
They should be stored in a safe place together
with all other user documentation and information
so they can be consulted again when necessary at
Jola Spezialschalter GmbH & Co. KG
Klostergartenstr. 11 • 67466 Lambrecht (Germany)
Tel. +49 6325 188-01 • Fax +49 6325 6396
contact@jola-info.de • www.jola-info.de
Instructions for
Jola immersion probes
or
II 1 G Ex ia IIC T3 or T4 or T5 or T6 Ga
or
II 2/1 G Ex ia IIC T3 or T4 or T5 or T6 Ga/Gb
or
II 2 G Ex ia IIC T3 or T4 or T5 or T6 Gb
or
or
II 1 G Ex ia IIC T3 or T4 or T5 or T6 Ga
or
II 2/1 G Ex ia IIC T3 or T4 or T5 or T6 Ga/Gb
or
II 2 G Ex ia IIC T3 or T4 or T5 or T6 Gb
any time!
07.01.2018
I M2 Ex ia I Mb
I M2 Ex ia I Mb
1/9
Advertisement
Summary of Contents for Jola TSR D Variant Ex Series
- Page 1 Jola Spezialschalter GmbH & Co. KG Klostergartenstr. 11 • 67466 Lambrecht (Germany) Tel. +49 6325 188-01 • Fax +49 6325 6396 contact@jola-info.de • www.jola-info.de...
- Page 2 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 1. Area of application The immersion probes JOLA D-67466 Lambrecht 0080 TSR/.../../Variant ./Ex-M I M2 Ex ia I Mb TSR/.../../Variant ./Ex-0G II 1 G Ex ia IIC T3 or T4 or T5 or T6 Ga TSR/.../../Variant ./Ex-0G...
- Page 3 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 TSR or NTR/.../../Variant ./Ex-0G II 2/1 G: terminal box or cable entry placed in zone 1 or 2, probe tube placed in zone 0, 1 or 2;...
- Page 4 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 All the technical parameters of the immersion probe are listed in this brochure and the accompanying product description. You must always observe and follow all the instructions relating to these parameters.
- Page 5 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 The output parameters of the voltage source must be equivalent to or lower than the input parameters of the units as defined below. Maximum input parameters for each make or break reed contact of the immersion probe TSR or NTR/Variant ./Ex-.
- Page 6 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 3. Additional conditions for safe operation The temperature application range for the probe tube and the float of the immersion probes is -for the types Ex ia IIC T6: between - 20°C (optionally - 40°C) and + 60°C, -for the types Ex ia IIC T5: between - 20°C (optionally - 40°C) and + 75°C,...
- Page 7 DIN A 5 leaflet "User information/Instructions for use with mounting, operating and maintenance instructions for the product...". If the leaflet is not supplied with the product or is lost, you must always request a replacement leaflet from Jola. 5. Installation of the immersion probes TSR or NTR/.../../Variant ./Ex-.
- Page 8 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 Connection to the potential equalization system is essential for safe operation and must never be neglected. In potentially explosive atmospheres with gas hazards, the entire installation set- up must always comply with the standard EN 60 079-14 resp.
- Page 9 Installation, Operating and Maintenance Instructions for Jola immersion probes TSR and NTR/.../../Variant . /Ex-. 07.01.2018 In the case of an immersion probe equipped with a terminal box: After performing the corresponding checks, close the cover of the terminal box and tighten the 4 cover screws evenly and firmly but without applying unnecessary force.
-
Page 10: Eu Declaration Of Conformity
EU Declaration of Conformity Jola Spezialschalter GmbH & Co. KG Klostergartenstr. 11 67466 Lambrecht (Germany) declares as manufacturer under its sole responsibility that the following product, which is new and designed for use in potentially explosive atmospheres, Immersion probe TSR/.../../Variant ./Ex-0G II 1 G Ex ia IIC T3 or T4 or T5 or T6 Ga or TSR/.../../Variant ./Ex-0G...
Need help?
Do you have a question about the TSR D Variant Ex Series and is the answer not in the manual?
Questions and answers