Advertisement
Quick Links
INSTALLATION:
1)
Rotate the lower Light Stand so the light
switch is orientated in the desired direction.
2)
Attach the lower Light Stand to the upper
using the 3/8-16 x 1-1/4 bolts (Item 3) and
hardware (Items 11 & 15).
Run the light's power cord on the upper
3)
Light Stand to the outlet on the lower Light
Stand and secure it using the clamp (Item
10) and screw (Item 4).
4)
(At least two people are required for this
next step.) Lift the Light Stand assembly
into place onto the top of the Tire Spreader
column and tray. Use the two 3/8-16 x 1
bolts (Item 2) and washers (Items 15) at the
front of the Tire Spreader and the 3/8-16 x
1-1/4 bolts (Item 3) and hardware (Items 11
& 15) at the back to fasten the light
assembly to the spreader.
5)
Plug the power cord from switch to either the
outlet located on the side of the spreader
column, or to the nearest 110/120V outlet
where the cord won't be a tripping hazard.
Branick Industries, Inc. • 4245 Main Avenue • Fargo, North Dakota 58103
REV041123
LIGHT STAND
(5700 series)
04-0197
Installation/Repair
Information
P/N: 81-0308
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Branick 5700 Series
- Page 1 Plug the power cord from switch to either the outlet located on the side of the spreader column, or to the nearest 110/120V outlet where the cord won’t be a tripping hazard. Branick Industries, Inc. • 4245 Main Avenue • Fargo, North Dakota 58103 P/N: 81-0308 REV041123...
- Page 2 REPAIR PARTS ___________________________________________________________________________ ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 11-0137 CAPLUG 53-0036 LOOP CLAMP 028-021 3/8-16 X 1 SCREW 055-154 3/8-16 LOCK NUT 028-046 3/8-16 X 1-1/4 SCREW 055-160 1/4-20 LOCK NUT 028-148 1/4-20 X 1/2 SCREW 58-0008 DUPLEX RECEPTICLE COVER 40-0120 LED LIGHT FIXTURE...
Need help?
Do you have a question about the 5700 Series and is the answer not in the manual?
Questions and answers