Indicator Light ― User guide Contents Symbols, safety ....................................2 General safety information ....................................3 Correct use ....................................4 Improper use ....................................4 Technical data ....................................5 Installation ....................................7 Maintenance and repair ....................................8 Care and cleaning ....................................8 Disposal ....................................8 Documentation ....................................8 Symbols, safety Warning! Failure to observe this safety instruction is likely to result in material damage, serious injury or death Caution! Failure to observe this safety instruction can result in material damage, serious injury or death Caution! Failure to observe this safety instruction can result in material damage or injury Important information...
▪ Observe the regulations pertaining to accident prevention and environmental protection that apply in the country and workplace where the product is being used. ▪ Use only item products that are in perfect working order. ▪ Failure to use original spare parts will invalidate the product warranty! ▪...
Indicator Light ― User guide ATTENTION! Explosion hazard Use the Indicator Lights only in areas that do not have a potentially explosive atmosphere. Using the product in a potentially explosive atmosphere could cause an explosion. ATTENTION! Damage caused by using incorrect voltage: Use a power pack with protection class II (reinforced insulation).
▪ Suitable for immediate use, with direct, predefined segment actuation ▪ Simple installation (M30 screw attachment) 0.0.721.12 - 3-Segment Indicator Light Parameters 0.0.721.11 - 3-Segment Indicator Light with Buzzer Operating voltage 24 V DC (supply class 2) 24 V DC (supply class 2)
Page 6
Indicator Light ― User guide Colour of Signal connecting wire Red LED Brown Buzzer (0.0.721. 1 2) White Not connected (0.0.721. 1 1) Blue Green LED Black Yellow LED Grey M30x1.5 M30x1.5 ∅50.6 ∅50.6 0.0.721. 1 1 0.0.721. 1 2...
Indicator Light ― User guide Installation The Indicator Lights can be fitted to an item Line 8 profile using the enclosed fastening set. They can also be fitted to a panel by using additional or replacement fixings. M30x1.5 ∅50.6 Example: 3-Segment Indicator Light - 0.0.721. 1 1 ATTENTION! Risk associated with inadequate fixing: The device must be installed only on a suitable, level surface.
Dispose of the packaging using the return and collection systems that are available to you. Documentation A process of continuous product development ensures that products from item Industrietechnik GmbH always exhibit a high standard of innovation. Consequently, there could be inconsistencies between these operating instructions and the product you have acquired.
Need help?
Do you have a question about the 0.0.721.11 and is the answer not in the manual?
Questions and answers