Summary of Contents for RedSeven Amplification DOUBLE stereo LINE MIXER rev 2.0
- Page 1 DOUBLE stereo LINE MIXER rev 2.0 D O U B L E S T E R E O L I N E M I X E R rev. 2.0 TRANSFORMER ISOLATED UP: MONO DW: STEREO model: DSLM V2.0 User Manual...
-
Page 2: Table Of Contents
INDIEX INTRODUCTION pg 3 POWER SUPPLY !! WARNING !! pg 3 TECHNICAL FEATURES pg 4 CONNECTION EXAMPLES pg 6 TROUBLESHOTTING pg 11 WARRANTY pg 11... -
Page 3: Introduction
INTRODUCTION Double Stereo Line Mixer is a line level professional device for parallel processing, with a fixed 50/50 dry/wet mix. Thought as ultimate and compact solution in the business to mix up to two stereo returns with incoming dry signal into a single stereo output. To avoid any ground loop issue, sends are transformer isolated. -
Page 4: Technical Features
TECHNICAL FEATURES D O U B L E S T E R E O L I N E M I X E R rev. 2.0 TRANSFORMER ISOLATED UP: MONO DW: STEREO (right side) • INPUT: main input of the mixer, either mono or stereo (new in V2.0) . •... - Page 5 • FX2 RETURN: this input will accommodate a mono or stereo effect’s return. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX1 RETURN jack.
-
Page 6: Connection Examples
CONNECTION EXAMPLES Example 1 - One mono effect with a mono guitar amplifier. (INPUT) Signal comes from amp’s loop fx send , one copy is sent to external effect input (SEND) FX1 RETURN OUT LEFT then the output of external effect is sent back to routed back into amp’s loop fx RETURN. - Page 7 Example 2 - Two mono effects with a mono guitar amplifier. (INPUT) Signal comes from amp’s loop fx send , first copy is sent to external effect input (SEND). 1, second copy is sent to external effect input 2 with a Y CABLE FX1 RETURN The output of external effect 1 is sent to , output of external effect 2 is sent...
- Page 8 Example 3 - Two mono effects with two guitar amplifiers (or stereo power amplifier) – hard panned. (INPUT) Signal comes from amp’s loop fx send , first copy is sent to external effect input (SEND). 1, second copy is sent to external effect input 2 with a Y CABLE Mono output of external effect 1 and mono output of external effect 2 are wired with a FX1 RETURN.
- Page 9 Example 4 - One stereo effect with two guitar amplifiers (or stereo power amplifier). (INPUT) Signal comes from amp’s loop fx send , first copy is sent to left side of effect (SEND). input , second copy is sent to right side of effect input with a Y CABLE FX1 RETURN (tip) Left output of external effect is sent to , right output of external effect...
- Page 10 Example 5 - Two stereo effects with two guitar amplifiers (or stereo power amplifier). Stereo input as well. Signal comes from an external effect with stereo output, with a Y CABLE we connect INPUT jack. Put input switch in DW position (stereo). left &...
-
Page 11: Troubleshotting
TROUBLESHOOTING • Dual Stereo Line Mixer is not turning on (led indicator is not turning on) . Please check you power supply and be sure to check an output of real 9V with negative center connector with a multimeter. If the problem still there, contact RedSeven Amplificaton. -
Page 12: Warranty
WARRANTY DISCLAIMER Please, do not open DSLM’s box. For any problem contact your seller or write to us. RedSeven Amplification offer a standard two years full warranty for any component (except wear subjects). Revision 1.0 September 2019 Revision 1.1 – Ex5 fixed (wrong labels) March 2020 Revision 2.0 –...
Need help?
Do you have a question about the DOUBLE stereo LINE MIXER rev 2.0 and is the answer not in the manual?
Questions and answers