Advertisement
Instructions for Use – Total Oxygen Administration Device
Flotec's TOAD system is intended for use by patients up to 25 Liters Per Minute of Oxygen. The TOAD is intended for use in
pre-hospital applications, alternative care centers, mass casualty field applications, and augmentation of oxygen
administration during existing system failures.
Contraindications:
Patients undergoing procedures with flammable anesthetic gases.
Specifications:
Oxygen Supply Connections:
Oxygen Supply Requirements:
Temperature range:
Inlet Supply Outlet Fitting:
Settings for Oxygen Flow:
21 CFR 801, 803, 806, 807, 820, & 821
CGA E-7
CGA G4.1
MRI Conditional (selected P/N's)
ASTM-G175-03
TOAD (2023-4-11).docx.pdf
CGA-540 and CGA-440
40 – 60 PSIG Oxygen @150 LPM
Use between -26 to 60° C (-15 to 140° F)
DISS-1240
2, 4, 6 LPM
2, 4, 8, 10, 15 LPM
2, 4, 8, 10, 15, 20, 25 LPM
ISO 13485:2016
SOR/98-282
Council Directive 93/42/EEC
©Flotec, Inc. 1983-2023
MDSAP
TG(MD)R 2002
EN ISO 14971:2012
RoHS
Page 1 of 8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Flotec Total Oxygen Administration Device
- Page 1 Instructions for Use – Total Oxygen Administration Device Flotec’s TOAD system is intended for use by patients up to 25 Liters Per Minute of Oxygen. The TOAD is intended for use in pre-hospital applications, alternative care centers, mass casualty field applications, and augmentation of oxygen administration during existing system failures.
-
Page 2: Installation
Instructions for Use – Total Oxygen Administration Device Warnings! Read all safety warnings in this document before using the device. Obey all safety warnings at all times. Device Setup Locate the TOAD Interface Box in a location which facilitates the monitoring of the system pressure gauge and convenient connection to the oxygen source(s) regulator using the hose assemblies with DISS style quick connects. -
Page 3: Troubleshooting
• application. Do not apply lubricants to the threads that are incompatible with the hose material or medical gas used. If unsure, consult Flotec. • Do not use humidifiers upstream of this device or otherwise introduce moisture above atmospheric levels into the device. - Page 4 This is a top view of a standard Variable Gas Liquid (VGL) vessel. The Total Oxygen Administration Device is designed to utilize the “Gas Valve” ONLY! Never...
- Page 5 Instructions for Use – Total Oxygen Administration Device The Total Oxygen Administration Device “Interface Box” Is intended for use with supply lines and patient strands provided with each system ONLY! The Interface Box will allow for the addition or replacement of either source, as well as the removal or addition of either Patient flow strand without interruption of already established Oxygen administration.
- Page 6 Instructions for Use – Total Oxygen Administration Device PART # DESCRIPTION 009-1000-002 Liquid Oxygen Regulator 009-1000-003 Cap, Liquid Oxygen Regulator (REQUIRED) DR5303-6003 InGage CGA 540 Pressure Reducer (for H Cylinder) 015-1021-001 TOAD, Interface Box 015-1022-001 Hose Assy HAG3-3SC1-240 20 feet...
- Page 7 In the event the product returned by purchaser is not defective, has not malfunctioned and does conform to this warranty, Flotec shall not be obligated to repair or replace the product and shall not be obligated for shipping charges for return of the product to the purchaser.
- Page 8 Instructions for Use – Total Oxygen Administration Device 21 CFR 801, 803, 806, 807, 820, & 821 ISO 13485:2016 MDSAP CGA E-7 CGA G4.1 SOR/98-282 TG(MD)R 2002 EN ISO 14971:2012 MRI Conditional (selected P/N’s) ASTM-G175-03 Council Directive 93/42/EEC RoHS Page 8 of 8 TOAD (2023-4-11).docx.pdf...
Need help?
Do you have a question about the Total Oxygen Administration Device and is the answer not in the manual?
Questions and answers