1. Manuals
  2. Brands
  3. Murata Manuals
  4. Industrial Electrical
  5. GJM0335C1E1R0BB01 Series
  6. Reference sheet

Murata GJM0335C1E1R0BB01 Series Reference Sheet

Only reflow soldering chip monolithic ceramic capacitor high-q type for general
Hide thumbs

Advertisement

Table of Contents

Only Reflow Soldering
CHIP MONOLITHIC CERAMIC CAPACITOR HIGH-Q TYPE FOR GENERAL
GJM0335C1E1R0BB01_ (0201, C0G, 1pF, 25Vdc)
_: packaging code
1.Scope
This product specification is applied to Chip Monolithic Ceramic Capacitor High-Q Type used for General Electronic
equipment.
This product is applied for Only Reflow Soldering.
　　
2.MURATA Part NO. System
(Ex.)
GJM
03
(1)L/W
Dimensions
3. Type & Dimensions
L
W
T
e
g
e
(1)-1 L
(1)-2 W
0.6±0.03
0.3±0.03
4.Rated value
(3) Temperature Characteristics
(Public STD Code):C0G(EIA)
Temp. coeff
or　Cap. Change
0±30 ppm/°C
5.Package
mark
(8) Packaging
f180mm Reel
D
PAPER W8P2
f180mm Reel
W
PAPER W8P1
f330mm Reel
J
PAPER W8P2
Product specifications in this catalog are as of Jan.24,2013,and are subject to change or obsolescence without notice.
Please consult the approval sheet before ordering.
Please read rating and !Cautions first.
GJM0335C1E1R0BB01-01
3
5C
(2)T
(3)Temperature
Dimensions
Characteristics
(2) T
0.3±0.03
0.1 to 0.2
(4)
DC Rated
Temp. Range
Voltage
(Ref.Temp.)
25 to 125 °C
25 Vdc
(25 °C)
Packaging Unit
15000 pcs./Reel
30000 pcs./Reel
50000 pcs./Reel
1E
1R0
(6)Capacitance
(4)DC Rated
(5)Nominal
Tolerance
Voltage
Capacitance
(Unit:mm)
e
g
0.2 min.
(6)
(5) Nominal
Capacitance
Capacitance
Tolerance
1 pF
±0.1 pF
1
Reference Sheet
B
B01
(7)Murata's
(8)Packaging
Control Code
Specifications and Test
Methods
(Operationg
Temp. Range)
-55 to 125 °C
D
Code

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GJM0335C1E1R0BB01 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Murata GJM0335C1E1R0BB01 Series

Summary of Contents for Murata GJM0335C1E1R0BB01 Series

  • Page 1 _: packaging code Reference Sheet 1.Scope This product specification is applied to Chip Monolithic Ceramic Capacitor High-Q Type used for General Electronic equipment. This product is applied for Only Reflow Soldering. 　　 2.MURATA Part NO. System (Ex.) (7)Murata’s (2)T (6)Capacitance (8)Packaging (1)L/W...
  • Page 2 ■SPECIFICATIONS AND TEST METHODS Item Specification Test Method △C：－55℃ to 125℃ 1 Operating Reference Temperature：20℃(2C,3C,4C） Temperature Range 25℃ (5C,6C） 2 Rated Voltage See the previous pages. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, V or V whichever is larger, should be maintained within the rated voltage...
  • Page 3 ■SPECIFICATIONS AND TEST METHODS Item Specification Test Method 13 Solderability 75% of the terminations is to be soldered evenly Immerse the capacitor in a solution of ethanol (JIS-K-8101) and of Termination and continuously. rosin (JIS-K-5902) (25% rosin in weight propotion) . Preheat at 80 to 120℃...
  • Page 4 ■SPECIFICATIONS AND TEST METHODS Item Specification Test Method 18 High Temperature Appearance No defects or abnormalities. Apply 200% of the rated voltage at the maximum operating Load temperature±3℃ for 1000±12 hours. Capacitance Within ±3% or ±0.3pF Set for 24±2 hours at room temperature, then measure. Change (Whichever is larger) The charge/discharge current is less than 50mA.
  • Page 5 ■SPECIFICATIONS AND TEST METHODS Adhesive Strength of Termination,Vibration Resistance,Temperature Cycle, Test method : Deflection Humidity ,Humidity Load,High Temperature Load ・Test substrate ・Test substrate Material : Copper-clad laminated sheets for PCBs Material : Copper-clad laminated sheets for PCBs (Glass fabric base, epoxy resin) (Glass fabric base, epoxy resin) Thickness : 0.8mm Thickness : 0.8mm...
  • Page 6 Package GJM Type 1.Tape Carrier Packaging(Packaging Code:D/E/W/L/J/F) 1.1 Minimum Quantity(pcs./reel) φ180mm reel φ330mm reel Type Plastic Tape Paper Tape Paper Tape Code:L Code:D/E Code:W Code:J/F GJM02 40000 (W4P1) GJM03 15000(W8P2) 30000(W8P1) 50000(W8P2) 10000(W8P2) 20000(W8P1) 50000(W8P2) GJM15 1.2 Dimensions of Tape (in mm) (1)GJM02(W4P1 CODE:L) 2.0±0.04...
  • Page 7 Package GJM Type 　(3)GJM03/GJM15(W8P1 CODE:W) (in mm) 4.0±0.1 1.0±0.05 +0.1 φ1.5 Ａ 1.0±0.05 Code GJM03 GJM15 A *3 0.37 0.65 B *3 0.67 1.15 *3 Nominal value ｔ 0.5 max. 0.8 max. JEMCGP-01914A...
  • Page 8 態 ( 単位： mm) Package GJM Type Fig.1 Package Chips (in mm) Chip Fig.2 Dimensions of Reel 2.0±0.5 φ21±0.8 ｗ Fig.3 Taping Diagram GJM02 8.0 max. 5±1.5 GJM03/GJM15 16.5 max. 10±1.5 Top Tape : Thickness 0.06 Feeding Hole :As specified in 1.2. Hole for Chip : As specified in 1.2.
  • Page 9 Package ﾌﾟ詰め状態 ( 単位： mm) GJM Type 1.3 Tapes for capacitors are wound clockwise shown in Fig.3. (The sprocket holes are to the right as the tape is pulled toward the user.) 1.4 Part of the leader and part of the vacant section are attached as follows. (in mm) Tail vacant Section Chip-mounting Unit...
  • Page 10 Caution ■ Limitation of use Please contact our sales representatives or product engineers before using our products for the applications listed below which require of our products for other applications than specified in this product. 　　　①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment 　　　⑤Medical equipment ⑥Transportation equipment(vehicles,trains,ships,etc.) ⑦Traffic signal equipment 　　　⑧Disaster prevention / crime prevention equipment...
  • Page 11 Caution ■Rating 1.Temperature Dependent Characteristics 1. The electrical characteristics of the capacitor can change with temperature. 1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes. The following actions are recommended in order to insure suitable capacitance values. (1) Select a suitable capacitance for the operating temperature range.
  • Page 12 Caution 3.Applied Voltage 1. Do not apply a voltage to the capacitor that exceeds the rated voltage as called-out in the specifications. 1-1. Applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage. (1) When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage.
  • Page 13 Caution 5. DC Voltage and AC Voltage Characteristic 1. The capacitance value of a high dielectric constant type capacitor changes depending on the DC voltage applied. Please consider the DC voltage characteristics when a capacitor is selected for use in a DC circuit. 1-1.

  • Page 14: Vibration And Shock

    Caution 7.Vibration and Shock 1. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance. Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals. 2. Mechanical shock due to falling may cause damage or a crack in the dielectric material of the capacitor. Do not use a fallen capacitor because the quality and reliability may be deteriorated.
  • Page 15 Caution 2.Information before mounting 1. Do Not re-use capacitors that were removed from the equipment. 2. Confirm capacitance characteristics under actual applied voltage. 3. Confirm the mechanical stress under actual process and equipment use. 4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly. 5.
  • Page 16 Caution 4-1.Reflow Soldering 1. When sudden heat is applied to the components, the [Standard Conditions for Reflow Soldering] mechanical strength of the components will decrease because a sudden temperature change causes Infrared Reflow deformation inside the components. In order to prevent Temperature(℃) mechanical damage to the components, preheating is Soldering...
  • Page 17 Caution 4-2.Correction with a Soldering Iron 1. When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board.

  • Page 18: Not Recommended

    Caution 5.Washing Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken solder joints. Take note not to vibrate PCBs. 6.Electrical Test on Printed Circuit Board 1. Confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board.
  • Page 19 Caution 7.Printed Circuit Board Cropping 1. After mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that is caused by bending or twisting the board. 1-1. In cropping the board, the stress as shown right may cause the capacitor to crack. Try not to apply this type of stress to a capacitor.
  • Page 20 Caution ■ Others 1. Under Operation of Equipment 1-1. Do not touch a capacitor directly with bare hands during operation in order to avoid the danger of a electric shock. 1-2. Do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). Do not expose a capacitor to a conductive liquid, inducing any acid or alkali solutions.
  • Page 21 Notice ■ Rating 1.Operating Temperature 1. The operating temperature limit depends on the capacitor. 1-1.Do not apply temperatures exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated temperature which will cover the operating temperature range.

  • Page 22: Pcb Design

    Notice ■ Soldering and Mounting 1.PCB Design 1. Notice for Pattern Forms 1-1. Unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly on the substrate. They are also more sensitive to mechanical and thermal stresses than leaded components. Excess solder fillet height can multiply these stresses and cause chip cracking.
  • Page 23 Notice 2. Land Dimensions Chip Capacitor 2-1. Chip capacitor can be cracked due to the stress of PCB Land bending / etc if the land area is larger than needed and has an excess amount of solder. Please refer to the land dimensions in table 1 for reflow soldering. Solder Resist Please confirm the suitable land dimension by evaluating of the actual SET / PCB.
  • Page 24 Notice 2.Washing 1. Please evaluate a capacitor by actual cleaning equipment and condition surely for confirming the quality and select the applicable solvent. 2. Unsuitable cleaning solvent may leave residual flux, other foreign substances, causing deterioration of electrical characteristics and the reliability of the capacitors. 3.
  • Page 25 NOTE 1.Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. 2.Your are requested not to use our product deviating from this product specification. 3.We consider it not appropriate to include any terms and conditions with regard to the business transaction in the product specifications, drawings or other technical documents.

This manual is also suitable for:

Gjm0335c1e1r0bb01d

Table of Contents