Related Manuals for SUNESS EV-15.36N
Summary of Contents for SUNESS EV-15.36N
- Page 1 LiFePO4 Battery System USER MANUAL EV-15.36N To ensure proper use, please read this manual throughly before operation 65801-0014-00...
-
Page 2: Table Of Contents
7. ELECTRICAL CONNECTIONS .................. 4 Neither place nor install near flammable or explosive materials. 7.1 Battery system features ..................4 7.2 Electrical interface description of EV-15.36N ............ 4 7.3 Turn on / off ....................... 5 Install the product out of reach of children. -
Page 3: Safety
• Do not connect batteries with different types. • Please ensure that all the batteries are grounded. EV-15.36N • Do not open the battery to repair or disassemble. Only SUNESS technicials are allowed to carry out any such repairs. 15.36KWH •... -
Page 4: Electrical Connections
• Battery Protection: Internal Short Circuit, Over voltage, over current, over temp, Under voltage The battery system contains the following Interface to allow it connected and operated efficiently. 7.2 Electrical interface description of EV-15.36N 7.4 Description for communication port F G H... -
Page 5: Installation
8. INSTALLATION 8.1 Items in the package CAN-1H PCS-CAN-H Please check if the following items are included with the package: 485-1A PCS-485-A 485-1B PCS-485-B CAN-1H PCS-CAN-H CAN-1L PCS-CAN-L CAN-2H BMS-CAN-H CAN-2L BMS-CAN-L Note: The PCS communication network port allows for external CAN communication and RS485 communication. -
Page 6: Installation Instructions
8.3 Installation instructions Requirements for Installation Location a) A solid support surface must be available (e.g., concrete or masonry). b) The installation location must be indoors. c) The installation location must be inaccessible to children. d) The installation location must be tolerable for the weight and dimensions of the battery system. e) The installation location must not be exposed to direct sunlight. -
Page 7: Connection For Parallel Mode
8.5 Connection for parallel mode 8.6 LCD display indicators The EV-15.36N battery support to be connected in parallel for expansion. lf you need one more battery bank work in parallel mode, connect the battery as shown in Figure 1. Main Circuit Buttons (from top to bottom) •... -
Page 8: Led Indication Indicators
8.7 LED indication indicators Operational status description SOC LED System Status Protection/Alarm/Normal Description ● ● ● ● ● ● Hibernation Standby Normal Flash 1 Standby ALM and RUN lights Alarm Flash 3 Flash 3 Flash 3 Maximum SOC LED Normal Flash 2 Based on capacity indication... -
Page 9: Communication Instructions
5 units in parallel Browser Scan(Android) SUNESS 6 units in parallel 7 units in parallel Note: Apple devices please search “SUNESS” in App store directly. 8 units in parallel 9 units in parallel 10 units in parallel 11 units in parallel... -
Page 10: Warranty
The warranty does not cover defects caused by normal wear and tear, improper maintenance, transportation, storage, incorrect repair, modifications to the battery pack by third parties other than SUNESS, failure to comply with provided product specifications, or improper use or installation, including but not limited to the following: •...
Need help?
Do you have a question about the EV-15.36N and is the answer not in the manual?
Questions and answers