North Star 44157 Manual

CHANGING NOZZLES
Please note: Nozzles occasionally plug due to continous contact with dirt
and debris. A plugged nozzle is not a sign of a defective product.
It is a normal accumulative result
of repeatedly cleaning dirt, dust and grime.
Enclosed you will find TWO BONUS NOZZLES.
Should a nozzle become plugged, simply unscrew the plugged nozzle and replace
with one of the two included replacement nozzles. The plugged nozzle can be
easily cleaned with a small object, such as a needle or paper clip, for future use.
We want you to experience the full cleaning capabilities of your Surface Cleaner
and are comitted to your satisfaction.
32" Surface Cleaner
NT Item #44157
5. Assembly:
1. Bolt the handle onto inside to the fixing point of the chassis
with the bolts supplied.
2. Place the high pressure hose onto the connection an
screw.
3. Connect your high pressure hose onto the mains and it is
now ready for use.
6. Service & Maintenance:
Do not park the cleaner on uneven ground, as this may deform the
brush disc. Do not clean the appliance with a high pressure jet –
simply use a rag or sponge and hose it down with tap water.
7. Malfunctions:
Should the appliance still not perform as expected, the problem
will probably originate from the high-pressure cleaner. Read the
instruction manual of your high-pressure cleaner, or approach the
distributor or manufacturer of your high-pressure cleaner.
8.Technical data
Pressure: 5100 PSI
Flow rate: 8 GPM
Temp.: 200°F
Weight: 66 LBS
32" Stainless Steel Surface Cleaner
FC AGRAR
VAC WATER RECOVERY
NT Item #44157