Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Autotek Manuals
  4. Stereo Equalizer
  5. ATEQ7B
  6. Operator's manual

Autotek ATEQ7B Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Operator's Guide
ATEQ7B

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATEQ7B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autotek ATEQ7B

Summary of Contents for Autotek ATEQ7B

  • Page 1 Operator’s Guide ATEQ7B...
  • Page 2 Thank you for purchasing the AUTOTEK ATEQ7B 7-Band Equalizer/ two-way crossover. This unit has both a pre-amp equalizer and crossover to provide the multi-speaker system of your vehicle with improved sound performance. Please read the entire manual to ensure proper connections and application.
  • Page 3 MOUNTING 1. Select the desired mounting location, either under the dash or in the dash. Make sure that there is adequate depth for the ATEQ7B. 2. Use the mounting brackets and hardware provided. Make sure there is proper clearance for the mounting bracket screws when attaching under the dash.

  • Page 4: Functions And Operations

    Functions & Operations Volume Control: The audio level (volume) can be increased or decreased with this illuminated VOLUME control knob. Fader Control: Allows to control the front and rear output levels. Subwoofer Control: The Subwoofer output level is controlled by the SUB illuminated knob.
  • Page 5 Functions & Operations...
  • Page 6 Aftermarket Unit Setup...
  • Page 7 Factory Unit Setup...

  • Page 8: Diagnostics And Troubleshooting

    Fuses chassis will cause the main fuse to blow. Blowing 3) If the ATEQ7B is blowing fuses continually with only +12 volt, ground and remote leads connected, the unit may be faulty. 1) Check all fuses. 2) Check all connections.

  • Page 9: Specifications

    Ticking or 1) This problem could be caused by radiation pickup of RCA cables that are too close to a fuel pump or a distributor. Whine that 2) Check that the head unit ground is connected straight to the changes vehicle chassis and does not use factory wiring for ground.
  • Page 10 USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. Autotek products are designed and engineered in the USA by www.maxxsonics.com AT ATEQ7B QSG 01 - rev1...